An anti-algae agent alone is no solution

Everyone knows this scenario. Just last week the pond was alright, then suddenly the algae came overnight.

Why does this happen?

It’s really very simple. You only have to keep in mind 2 factors:

1. The stability of the water. The acidity (pH value) can be subject to enormous fluctuations during the day. To avert this we need to take a look at the carbonate hardness, which must be above 4 °dKH. This way the pH value (acid value) stabilizes and lies between 7.5 and 8.3. If the KH is lower than 4 °dKH we are talking about an unstable milieu, which leads to strong pH value fluctuations over the course of the day. This doesn’t only weaken the microorganisms but the fish's mucous membrane too, and it makes them susceptible to diseases and parasites. So please take note of the following: The KH stabilizes the pH level. A too high KH doesn’t signify a high, but only a very stable pH level!

2. The nutrient content in the water. Here the focus is on the phosphate value (PO4) which represents the nutrient basis for many algae. Through strong pollen flight, leaves, blossoms and decaying plants, large amounts of phosphate enter the pond water cycle. But fertilisers from the garden, washed in during the rain, are often also the cause. Within a short period the floating and thread algae are able to completely absorb the nutrients. This is how the free phosphate can be undetectable in the water when the algae blooms are very severe. The aim should be to keep the phosphate level under 0.02 mg/l.

What can you do?

1. Ensure adequate stability of the water. Test for carbonate hardness (KH) every 2-3 weeks or after each heavy rainfall. If it’s under 4 °dKH, minerals ( JBL StabiloPond KH ) must be added to the pond.

2. Constantly bind the nutrients with a phosphate remover ( JBL PhosEX Pond Filter ). With every litre of water running through the filter excess nutrients get bound and the algae will be “taken away”. If you don’t have a filter, use a liquid phosphate binder ( JBL PhosEx Pond Direct ). A dosing is to be done every 7-14 days because it only has an intermittent limited effect.)

With only 2 steps you will be able to keep the pond in looking great the whole season. The use of a UVC water clarifier can help as an additional preventive measure to make the application of anti-algae agents redundant.

Without you noticing we have explained you the 1-2-3 algae-free concept. With this you will achieve a perfect pond, sustainably without the use of an anti-algae treatment.

© 25.08.2015
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Su di me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Commenti

Cookie, qualche informazione e poi continua la navigazione

Anche il sito di JBL utilizza diversi tipi di cookie per poterti offrire una funzionalità completa e molti servizi. I cookie tecnici e funzionali sono strettamente necessari al funzionamento di questo sito. Inoltre utilizziamo i cookie per il marketing. Questo ci permette di riconoscerti alla tua prossima visita sul nostro vasto sito, di misurare il successo delle nostre campagne pubblicitarie e, tramite i cookie di personalizzazione, di rivolgerci a te individualmente e in modo diretto adattandoci ai tuoi bisogni, anche al di fuori del nostro sito web. Puoi decidere quali cookie accettare e quali rifiutare (per maggiori informazioni vedi "Modificare le impostazioni") in qualunque momento – anche in un momento successivo.

Anche il sito JBL utilizza diversi tipi di cookie per poterti offrire una piena funzionalità e molti servizi: i cookie tecnici e funzionali sono necessari per permetterti una comoda visita del nostro sito. Inoltre utilizziamo i cookie per ragioni di marketing. Puoi decidere in qualsiasi momento – ora o più tardi – quali cookie accettare e quali no (vedi di più sotto "Modificare impostazioni").

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. Ti preghiamo di confermare con "Accetto" l'utilizzo di tutti i cookie.

Hai più di 16 anni? Allora conferma l'utilizzo di tutti i cookie con "Ho preso atto" – e potrai continuare la navigazione.

Seleziona le tue impostazioni cookie

Cookie tecnici e funzionali, per fare in modo che tutto funzioni al meglio quando visiti il nostro sito.
Cookie di marketing, per riconoscerti sulle nostre pagine web e per poter misurare il successo delle nostre campagne pubblicitarie.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.