Phosphate: The cause of tomorrow’s algae is in your pond now.

Many pond owners don’t realise this. That’s why they don’t react to algae growth until it’s too late. This is not only annoying, it makes it harder to achieve clear water for your dream landscape. We will help you to avert the classic pitfalls, so that you never have to cope with the situation.

The cause of tomorrow’s algae is in your pond now: phosphates (PO4). You will have noticed many changes in and around your pond in the autumn and winter. Plants died off, leaves fell into the water and quite a bit of sludge (a sediment layer) collected on the bottom. On top of that come other phosphate sources you don’t really notice: The phosphorus deposition into German waters is about 23,000 t per year (data from 2005, source: Federal Environment Agency). If you convert this value into a single square metre water surface, this equates to a phosphorus deposition of 2683 mg / m², which works out as a phosphate deposition of 8229 mg per m². For a 2 m deep pond in rectangular shape this would entail a phosphate load of 4.1 mg/l per year.

Like many other pond owners you have probably never vacuumed your pond bottom, even though excrement, dead leaves and food remains create a steadily growing sediment layer, which can’t be removed from the pond by the pump or the filter. Although this is biologically active, it is also a large reserve for the unwanted algae nutrient phosphate (PO4). That way a sediment layer several centimetres thick can release up to 0.6 mg phosphate into the water per day. In heavily over-fertilized waters values have been found as high as 12 mg.

But even with a clean pond bottom a large amount of phosphate can be dissolved in the water. It’s better to test with a fine scale phosphate test ( JBL PROAQUATEST PO4 Phosphat Sensitive ) the content in your pond water. This should not be detectable all year round, otherwise it could lead to large thread and floating algae blooms.

Algae and sludge already present carry phosphates, which are not measurable with a test. When they die off or release their nutrients these phosphates are available for new algae. This is why you always need to remove algae and sludge mechanically from large surfaces in order to completely remove the nutrients from your pond system.

As general prevention measure we recommend you vacuum up the sludge in spring and in autumn, check the PO4 content every 2 to 4 weeks, and continuously collect the newly created nutrients using a filter media ( JBL PhosEX Pond Filter ). Especially in springtime an increased entry of the unwanted substance is caused by pollen, blossoms and insects.

Generously planting your pond with bank-side and marsh plants, water lilies and floating plants will give the algae some competition for their nourishment. The remaining phosphates will be quickly used up to help the plants grow and your pond will look great all year round – a real feel-good oasis.

© 04.04.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Su di me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Commenti

Cookie, qualche informazione e poi continua la navigazione

Anche il sito di JBL utilizza diversi tipi di cookie per poterti offrire una funzionalità completa e molti servizi. I cookie tecnici e funzionali sono strettamente necessari al funzionamento di questo sito. Inoltre utilizziamo i cookie per il marketing. Questo ci permette di riconoscerti alla tua prossima visita sul nostro vasto sito, di misurare il successo delle nostre campagne pubblicitarie e, tramite i cookie di personalizzazione, di rivolgerci a te individualmente e in modo diretto adattandoci ai tuoi bisogni, anche al di fuori del nostro sito web. Puoi decidere quali cookie accettare e quali rifiutare (per maggiori informazioni vedi "Modificare le impostazioni") in qualunque momento – anche in un momento successivo.

Anche il sito JBL utilizza diversi tipi di cookie per poterti offrire una piena funzionalità e molti servizi: i cookie tecnici e funzionali sono necessari per permetterti una comoda visita del nostro sito. Inoltre utilizziamo i cookie per ragioni di marketing. Puoi decidere in qualsiasi momento – ora o più tardi – quali cookie accettare e quali no (vedi di più sotto "Modificare impostazioni").

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. Ti preghiamo di confermare con "Accetto" l'utilizzo di tutti i cookie.

Hai più di 16 anni? Allora conferma l'utilizzo di tutti i cookie con "Ho preso atto" – e potrai continuare la navigazione.

Seleziona le tue impostazioni cookie

Cookie tecnici e funzionali, per fare in modo che tutto funzioni al meglio quando visiti il nostro sito.
Cookie di marketing, per riconoscerti sulle nostre pagine web e per poter misurare il successo delle nostre campagne pubblicitarie.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.