Phosphate: The cause of tomorrow’s algae is in your pond now.

Many pond owners don’t realise this. That’s why they don’t react to algae growth until it’s too late. This is not only annoying, it makes it harder to achieve clear water for your dream landscape. We will help you to avert the classic pitfalls, so that you never have to cope with the situation.

The cause of tomorrow’s algae is in your pond now: phosphates (PO4). You will have noticed many changes in and around your pond in the autumn and winter. Plants died off, leaves fell into the water and quite a bit of sludge (a sediment layer) collected on the bottom. On top of that come other phosphate sources you don’t really notice: The phosphorus deposition into German waters is about 23,000 t per year (data from 2005, source: Federal Environment Agency). If you convert this value into a single square metre water surface, this equates to a phosphorus deposition of 2683 mg / m², which works out as a phosphate deposition of 8229 mg per m². For a 2 m deep pond in rectangular shape this would entail a phosphate load of 4.1 mg/l per year.

Like many other pond owners you have probably never vacuumed your pond bottom, even though excrement, dead leaves and food remains create a steadily growing sediment layer, which can’t be removed from the pond by the pump or the filter. Although this is biologically active, it is also a large reserve for the unwanted algae nutrient phosphate (PO4). That way a sediment layer several centimetres thick can release up to 0.6 mg phosphate into the water per day. In heavily over-fertilized waters values have been found as high as 12 mg.

But even with a clean pond bottom a large amount of phosphate can be dissolved in the water. It’s better to test with a fine scale phosphate test ( JBL PROAQUATEST PO4 Fosforany Sensitive ) the content in your pond water. This should not be detectable all year round, otherwise it could lead to large thread and floating algae blooms.

Algae and sludge already present carry phosphates, which are not measurable with a test. When they die off or release their nutrients these phosphates are available for new algae. This is why you always need to remove algae and sludge mechanically from large surfaces in order to completely remove the nutrients from your pond system.

As general prevention measure we recommend you vacuum up the sludge in spring and in autumn, check the PO4 content every 2 to 4 weeks, and continuously collect the newly created nutrients using a filter media ( JBL PhosEX Pond Filter ). Especially in springtime an increased entry of the unwanted substance is caused by pollen, blossoms and insects.

Generously planting your pond with bank-side and marsh plants, water lilies and floating plants will give the algae some competition for their nourishment. The remaining phosphates will be quickly used up to help the plants grow and your pond will look great all year round – a real feel-good oasis.

© 04.04.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

O mnie: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Komentarze

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.