Témata

Filter material for troubleshooting

Is there a problem with your aquarium water? Here you can see which filter material can help

If your water is not crystal-clear and odourless, then there is something wrong. Water tests will help you identify a lot of causes and resolve them with problem-solving products. Only cloudiness and odours cannot be analysed with water tests. You will find the most common problems and the corresponding possible solutions here.

Is the water cloudy?

Cloudy water is really unsightly, although it often disturbs the owner more than the fish. We distinguish between two types of cloudiness and two types of discolouration. Clouding limits the visibility into the water.

Zakalení

Different kinds of cloudiness and how to combat it?
Water has a colour cast

In contrast to cloudiness a discolouration occurs when there is a colour cast but the water still seems to be clear. Cloudiness limits the visibility into the water. There also are intended or “accepted” discolourations. By adding peat extracts ( JBL Tropol ) you add natural substances to the aquarium water which your fish know from the wild. Thus the water turns slightly tea-coloured as in many rivers and streams in the tropics. The fish feel more comfortable and some species can only be bred that way! After adding medications a blue water discolouration (for example) can temporarily occur. It doesn’t look nice but is inevitable during the use of medication.

Čištění

An aquarium requires less work than any other pet. Here’s how to do it properly!
Does your water smell stale?

This may be due to rotting processes in the aquarium or to blue-green algae. Please check and remove, if required: dead fish, algae, dead plants, too much or uneaten food or a lot of debris on the ground.

Inserting activated carbon in filter: JBL Carbomec ultra

Nitrate (NO3)

Value in freshwater < 30 mg/l, marine water < 20 mg/l

Nitrate (NO3) is a nitrogen compound which occurs bacterially from nitrite (NO2). Unlike nitrite nitrate is non-toxic, but it serves algae as nutrients and can lead to excessive algae growth. It is therefore advisable to reduce the nitrate content if nitrate values in freshwater exceed 30 mg/l (in marine water 20 mg/l). With the right filter material you can specifically and easily reduce the nitrate levels to the desired value.

Hodnoty vody

Which water tests are important? How can you achieve perfect water values?
Silicates/ silicic acid (SiO2)

Recommended value: < 1 mg/l

As soon as you reduce the silicic acid content in the water by using a silicate remover ( JBL SilicatEx rapid ) diatoms can no longer survive. Using a silicate test ( JBL PROAQUATEST SiO2 křemičitan ), you can determine the silicate content in your tap and aquarium water quickly and easily.

Phosphates (PO4)

Recommended value: < 0,1 mg/l

Phosphates and nitrates generally serve algae as main nutrients. Therefore the phosphate value shouldn’t exceed 0.1 mg/l. Phosphates react quite quickly with minerals in the water and precipitate (sediment). It is therefore useful to regularly use a gravel cleaner ( JBL AquaEx sada 45-70 / JBL Aqua In Out kompletní sada ) during a partial water change. Clean the filter too, as filter sludge contains large amounts of phosphate.

Decreasing the phosphate value: in addition to the already mentioned measures, phosphate can easily, quickly and reliably be removed with the special filter material JBL PhosEx ultra . If you wish not only to remove phosphate, but also nitrite and nitrate, we recommend the dedicated filter media JBL ClearMec plus .

Several water values are not correct (nitrite, nitrate, phosphate)

With JBL ClearMec plus you have the opportunity to remove several problem substances in one go. One pack is enough for 150-300 l aquarium water, depending on the pollution.

Nitrite values too high

Nitrite (NO2) should, after a running-in phase of two weeks (with bacterial starter JBL Denitrol and slowly growing animal stock), lie under the detection limit of 0.01 mg/l. All higher nitrite values indicate that the natural bacterial degradation of nitrogen compounds in your aquarium are out of balance for some reason. If the nitrite level in your aquarium is higher, the concentration of these nitrogen compounds (from 0.4 mg/l) may be deadly. Please check the following factors:

Have you got enough filter material? Increase the amount, if necessary.

Can you perhaps replace the sponge in your filter with more effective filter material, such as JBL SintoMec or JBL MicroMec ?

Did you add salt? Salt kills bacteria, even the beneficial ones. Rebuild bacterial flora with JBL Denitrol and JBL FilterStart .

Did you add new filter bacteria ( JBL FilterStart ), after cleaning of your filter media and killing off or at least reducing your filter bacteria?

Did you rebuild the bacterial flora after the use of bactericidal remedies? Do always carry out a 30-50 % partial water change after a remedy treatment and add JBL Carbomec activ to your filter and JBL Denitrol .

Cookie, krátké info, poté pokračujte dále

Také JBL Homepage využívá různé druhy cookies, aby vám mohla nabídnout plnou funkčnost a mnoho služeb: Technické a funkční cookies vyžadujeme, aby se při vaší příští návštěvě této stránky vše podařilo zajistit. Dále cookies využíváme k marketingu. Tím se zajistí, abychom vás při vaší další návštěvě rozpoznali, mohli hodnotit úspěch našich kampaní a na základě personalizovaných cookies se mohli individuálně přizpůsobit vašim potřebám - také mimo naše stránky. Kdykoli můžete - i později - určit, které cookies povolíte, a které ne (více k tomu "Změnit nastavení")

Domovská stránka JBL používá také několik typů souborů cookie, aby vám mohla nabídnout plnou funkčnost a mnoho služeb: Technické a funkční soubory cookie nezbytně potřebujeme k tomu, aby při návštěvě této domovské stránky vše fungovalo. Kromě toho používáme soubory cookie pro marketingové účely. Kdykoli – i později – můžete určit, které soubory cookie povolíte a které ne (více v části "Změna nastavení").

V našem Prohlášení o ochraně osobních údajů se dozvíte, jak zpracováváme osobní údaje a k jakým účelům je používáme. se dozvíte, jak zpracováváme osobní údaje a k jakým účelům je používáme. Potvrďte prosím použití všech souborů cookie kliknutím na "Potvrzeno" – a můžete pokračovat.

Je vám více než 16 let? Pak potvrďte, že "berete na vědomí" používání všech cookies a pokračujte dál.

Zvolte nastavení cookies

Technické a funkční cookies, aby se při vaší návštěvě naší stránky vše podařilo.
Marketingové cookies, abychom vás mohli rozpoznat na našich stránkách a hodnotit úspěch našich kampaní.

Oznámení PUSH od společnosti JBL

Co jsou zprávy PUSH? Webová oznámení jako součást standardu W3C definují rozhraní API pro oznámení koncovým uživatelům, která jsou zasílána na počítač a/nebo mobilní zařízení uživatele prostřednictvím prohlížeče. Oznámení se na koncových zařízeních zobrazují tak, jak je koncový uživatel zná z aplikací nainstalovaných v zařízení (např. e-maily). Na koncových zařízeních se zobrazují oznámení, která koncový uživatel zná z aplikací nainstalovaných v zařízení (např. e-maily).

Tato oznámení umožňují provozovateli webových stránek kontaktovat uživatele po celou dobu, kdy mají uživatelé otevřený prohlížeč – bez ohledu na to, zda uživatel právě navštěvuje webové stránky, či nikoli.

Abyste mohli odesílat webová oznámení push, potřebujete pouze webovou stránku s nainstalovaným kódem web push. To znamená, že i značky bez aplikací mohou využívat mnoho výhod push oznámení (personalizovaná komunikace v reálném čase a přesně ve správný okamžik).

Webová oznámení jsou součástí standardu W3C a definují rozhraní API pro oznámení koncovým uživatelům. Oznámení umožňuje upozornit uživatele na událost mimo kontext webové stránky, například na nový příspěvek na blogu.

Tuto službu poskytuje společnost JBL GmbH & Co. zdarma. KG poskytuje tuto službu bezplatně a lze ji stejně snadno aktivovat i deaktivovat.