Themeworld

Filter material for troubleshooting

Is there a problem with your aquarium water? Here you can see which filter material can help

If your water is not crystal-clear and odourless, then there is something wrong. Water tests will help you identify a lot of causes and resolve them with problem-solving products. Only cloudiness and odours cannot be analysed with water tests. You will find the most common problems and the corresponding possible solutions here.

Is the water cloudy?

Cloudy water is really unsightly, although it often disturbs the owner more than the fish. We distinguish between two types of cloudiness and two types of discolouration. Clouding limits the visibility into the water.

Kinds of cloudiness

Different kinds of cloudiness and how to combat it?
Water has a colour cast

In contrast to cloudiness a discolouration occurs when there is a colour cast but the water still seems to be clear. Cloudiness limits the visibility into the water. There also are intended or “accepted” discolourations. By adding peat extracts ( JBL Tropol ) you add natural substances to the aquarium water which your fish know from the wild. Thus the water turns slightly tea-coloured as in many rivers and streams in the tropics. The fish feel more comfortable and some species can only be bred that way! After adding medications a blue water discolouration (for example) can temporarily occur. It doesn’t look nice but is inevitable during the use of medication.

Cleaning

An aquarium requires less work than any other pet. Here’s how to do it properly!
Does your water smell stale?

This may be due to rotting processes in the aquarium or to blue-green algae. Please check and remove, if required: dead fish, algae, dead plants, too much or uneaten food or a lot of debris on the ground.

Inserting activated carbon in filter: JBL Carbomec ultra

Nitrate (NO3)

Value in freshwater < 30 mg/l, marine water < 20 mg/l

Nitrate (NO3) is a nitrogen compound which occurs bacterially from nitrite (NO2). Unlike nitrite nitrate is non-toxic, but it serves algae as nutrients and can lead to excessive algae growth. It is therefore advisable to reduce the nitrate content if nitrate values in freshwater exceed 30 mg/l (in marine water 20 mg/l). With the right filter material you can specifically and easily reduce the nitrate levels to the desired value.

Water values

Which water tests are important? How can you achieve perfect water values?
Silicates/ silicic acid (SiO2)

Recommended value: < 1 mg/l

As soon as you reduce the silicic acid content in the water by using a silicate remover ( JBL SilicatEx Rapid ) diatoms can no longer survive. Using a silicate test ( JBL PROAQUATEST SiO2 Silicate ), you can determine the silicate content in your tap and aquarium water quickly and easily.

Phosphates (PO4)

Recommended value: < 0,1 mg/l

Phosphates and nitrates generally serve algae as main nutrients. Therefore the phosphate value shouldn’t exceed 0.1 mg/l. Phosphates react quite quickly with minerals in the water and precipitate (sediment). It is therefore useful to regularly use a gravel cleaner ( JBL AquaEx Set 45-70 / JBL Aqua In Out Complete Set ) during a partial water change. Clean the filter too, as filter sludge contains large amounts of phosphate.

Decreasing the phosphate value: in addition to the already mentioned measures, phosphate can easily, quickly and reliably be removed with the special filter material JBL PhosEX ultra . If you wish not only to remove phosphate, but also nitrite and nitrate, we recommend the dedicated filter media JBL ClearMec plus .

Several water values are not correct (nitrite, nitrate, phosphate)

With JBL ClearMec plus you have the opportunity to remove several problem substances in one go. One pack is enough for 150-300 l aquarium water, depending on the pollution.

Nitrite values too high

Nitrite (NO2) should, after a running-in phase of two weeks (with bacterial starter JBL Denitrol and slowly growing animal stock), lie under the detection limit of 0.01 mg/l. All higher nitrite values indicate that the natural bacterial degradation of nitrogen compounds in your aquarium are out of balance for some reason. If the nitrite level in your aquarium is higher, the concentration of these nitrogen compounds (from 0.4 mg/l) may be deadly. Please check the following factors:

Have you got enough filter material? Increase the amount, if necessary.

Can you perhaps replace the sponge in your filter with more effective filter material, such as JBL Sintomec or JBL Micromec ?

Did you add salt? Salt kills bacteria, even the beneficial ones. Rebuild bacterial flora with JBL Denitrol and JBL FilterStart .

Did you add new filter bacteria ( JBL FilterStart ), after cleaning of your filter media and killing off or at least reducing your filter bacteria?

Did you rebuild the bacterial flora after the use of bactericidal remedies? Do always carry out a 30-50 % partial water change after a remedy treatment and add JBL Carbomec activ to your filter and JBL Denitrol .

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.