Themeworld

Accidental poisoning

If your pond seems to be out of balance or if your animals show worrying behaviour or die, this could be a result of poisoning, even if the water tests aren’t indicating the wrong water levels.

Examining the gills for ammonia poisoning

Here is an outline of possible poisonings and remedial measures. It is essential that you react as quickly as possible!

Metal poisoning

As a general rule metals do not belong in the pond water! A lot of metals have the property to release free metal ions (charged particles) to the water, which have toxic effects on invertebrates, fish and microorganisms. The more acidic the water (pH value below 7), the higher the percentage of dissolved metal ions in the water. An extreme situation occurs with (acid) rain, when the rainwater collects in roof gutters and is reused: The low pH value of the rain water dissolves large quantities of copper ions out of the mostly copper-bearing gutters, which then lead to symptoms of poisoning. Titanium zinc is mostly used for rain gutters. This material has a service life of several decades and yet has the merit of being relatively cheap. Roof gutters made of copper are relatively expensive when compared to other materials, but they do provide a very long service life.

Problem: copper gutters

Care needs to be taken when multiple materials are used on the same building. Aluminium gutters are long-lasting but expensive. To be brief: A rainwater drainage system using metal gutters can lead to problems. Either you avoid this kind of water supply or you use a very effective water conditioner! The water conditioner JBL BiotoPond results in the binding (chelation) of metal ions. A water change is still necessary if you discern any poisoning symptoms. Be careful when using tap water. Metal pipes mean that lead, copper or zinc may be present in tap water ( JBL PROAQUATEST Cu Copper ). It is, therefore, absolutely necessary to use a good water conditioner ( JBL BiotoPond ) when carrying out a water change!

Ammonia poisoning

Beneficial bacteria degrade the dirt accumulating in your pond water and at the bottom of the pond. Ammonium NH4) and ammonia (NH3) are created from protein. Both are further processed to nitrite (NO2) and then to nitrate (NO3). Ammonium is also breathed out through the gills of your fish. These degrading bacteria can be damaged by new ponds, after bigger clean-up operations or after the use of antibacterial remedies, causing the ammonium content in the water to rise. In healthy, well established and efficient ponds you will almost never measure ammonium values above 0.1 mg/l. Ammonium itself is non-poisonous but a chemical equilibrium reaction causes it to transform itself to poisonous ammonia. The percentage of this newly created ammonia increases at pH values from 7.0 onwards. As soon as your fish show symptoms of poisoning (gasping at the water surface, darting backwards and forwards, reeling etc.), measure the ammonium content! The remedy is (firstly) an extensive water change to dilute the ammonia concentration and to slightly decrease the pH value to transform the poisonous ammonia back into non-poisonous ammonium. And (secondly) add beneficial bacteria with JBL BactoPond so that they can process ammonium/ammonia.

Decay processes at the bottom of the pond
Nitrite poisoning

Nitrite (NO2) occurs in the normal biological degradation process from ammonium and is processed to nitrate (NO3). During this nitrogen decomposition (nitrification) the pond water consumes a lot of oxygen. That’s why a good oxygen enrichment for the pond water is not only important for the fish. Without the required oxygen your pond bacteria are not able to do their work properly.

From 0.3 mg/l nitrite is toxic for fish and from about 0.5 mg/l it is usually deadly. This is because nitrite prevents the transport of oxygen by haemoglobin. It has the same shape as oxygen and blocks the docking of the oxygen to the red blood cells (similar to the lock-and-key principle). An increased nitrite value ( JBL PROAQUATEST NO2 Nitrite ) an increased nitrite value in your pond water is an extreme alarm signal that there is something wrong in your pond! The nitrite value should ALWAYS be below the detection limit! It’s important you then immediately find out why your bacteria didn’t process the nitrite to harmless nitrate. Possible causes: If your pond is still quite new (max. 3 weeks old), nitrite can accumulate because your beneficial bacteria have yet to develop. Remedy: With JBL FilterStart Pond and JBL BactoPond you can help your pond and accelerate the running-in process enormously.

Newly laid ponds need bacterial help to get started

Further ways to destroy the beneficial bacteria in the pond

If you have added salt to your pond (why? This does more harm than good), your bacteria won’t like that at all. Bacteria can’t get used to fluctuating salinity. If you insist on adding salt, you will have to restart the bacterial fauna AFTER the adding of salt with JBL FilterStart Pond and JBL BactoPond .

Neither do your bacteria like you adding antibacterial medicines to your pond because the medicines can’t differentiate between beneficial cleansing bacteria and pathogenic bacteria. Also in this case a bacterial reactivation with JBL FilterStart Pond and JBL BactoPond is urgently advised.

Adding beneficial bacteria after treating the disease

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.