Cold at the top and warm at the bottom - why you need a pond thermometer

You may look at your pond in winter and wonder what the water temperatures are. If there is ice floating on the surface, the temperatures will be around freezing point there. But what about deeper down? Water has a special property, different from many other liquids (anomaly of water): it has its highest density at 4 °C and expands when it cools down. This is why ice floats on top of water. Pond owners often use a pond thermometer to find out what the water temperatures in their pond are. However, they should remember that most thermometers, like the JBL Pond Thermometer , float on the surface and only show the water temperature there. At a depth of one metre, the temperature will (hopefully) be higher - usually around 4 °C in winter. This is where the fish rest, winding down their metabolisms.

To find out the temperatures in your pond water at different depths, tie a knot every 50 cm in the cord starting from the thermometer, put a weight on the thermometer and lower it. Wait a few minutes until it has taken on the ambient temperature of the respective depth and pull it up quickly. This is the quickest way to find out whether everything is as it should be in your pond! If the water temperature is lower than 4 °C even in its deep parts, the "warm" deep water will probably be circulating elsewhere and your pond will freeze through. This endangers not only your fish, but also the microorganisms! Therefore, never aerate or siphon off water (for filters or watercourses) at the deepest point of the pond.

Always position pumps and air stones so that they are at least 50 cm above the ground. This way your pond and its inhabitants will survive the winter without any problems! With the new automatic pond feeder, the JBL PROPOND AUTOFOOD , a temperature sensor with a three-metre cable is included for these reasons, and the display shows the water temperature realistically.

© 15.02.2021
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.