Why does the wood in aquariums lie with its roots facing upwards?

Have you ever noticed that in most aquariums the wooden roots are positioned with their wide ends at the bottom and the delicate roots pointing upwards? But why? While I was judging a biotope world championship, I noticed that almost all the participants there had done it differently. They had taken pains to position the roots to be visible in the aquarium with their roots facing downwards. A coincidence? No - definitely not! Biotope aquarists often collect an incredible amount of information about the habitats they want to recreate in the aquarium and look at lots of photos of them, if they exist at all. And these underwater photos tell you that it is only in exceptional cases that the roots do not protrude top downwards into the water. 

On the JBL expedition to Colombia in February 2022 ( Expedition 2022 Colombia I ), I paid especial attention to this issue. And it turned out that the result is not entirely clear. Most of the wood lies around in the water in all directions. When they break away from the river bank, the trees with their roots slide to the edge and tip into the river. When this happens the trees and branches end up lying horizontally in the water. Incidentally, this is quite unfortunate for the angelfish, whose vertical stripes are then as incongruous as dots in a check pattern. But maybe evolution will change that and in a million years we'll have angelfish with horizontal stripes. Crenicichla, on the other hand, often cavort in the water under horizontally lying tree trunks and their stripes perfectly match the shadows of the wood!

Back to the wooden roots. In smaller streams, the trees often grow right next to the river and when they die, there is a dead tree upright in the water. Then we have a root whose fine root network continues downwards in the water. By the way, this looks very natural in the aquarium and can be planted very nicely. The plants between the fine branches grow upwards and form a great visual complement to the wood.

You often get roots that have been cut into pieces with a saw to fit into your aquarium. Try NOT to put the smooth surfaces downwards, instead lean or glue them against the pane (this is more stable and prevents buoyancy). Since this sometimes happens when the aquarium is already full of water, you can use a good, non-toxic underwater glue such as JBL PROHARU UNIVERSAL . However, such glues are not superglues and, once glued to the pane, you’ll need to anchor the wooden root firmly in the right position with stones, until the glue has "hardened" the next day. This glue, by the way, is a good purchase for every aquarist, because we often need to fix something under water. But beware: when an object, whether wood, stone or plastic pipe, lies in the water for longer than a day, a biofilm forms on the surface that is so slippery that no glue will hold! So always remove biofilms first with a piece of clean steel wool, as with some pane cleaners (e.g. JBL Blanki ) instead of a steel brush, and remove the biofilm before gluing!

Glue overview:

For above and underwater bonding of stone, corals, plants, wood, decoration, panes, technical items, small leaks, metal (incl. aluminium), plastics except PE/PP: JBL PROHARU UNIVERSAL

For quick gluing (non-toxic superglue) of plants, corals, small decorative items:  JBL PROHARU RAPID

Especially for glass panes (TÜV tested):  JBL AquaSil transparent or JBL AquaSil black

For foil backgrounds (to be stuck from the outside), to apply the foil free of reflections and bubbles:  JBL FIXOL

Find out more about decoration (stones and roots) in the Themeworld under Decoration (stones, roots) .

© 12.02.2023
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.