Keeping an eye on the most important water values

Professional water analysis – this sounds punishingly expensive. It makes you think of a laboratory which sends you back a record sheet with results which you don’t know how to use, as with your blood values. But the professional water testing in your aquarium or pond at home also works on a high level and above all it is simple and inexpensive. Also on the Expediciones JBL Test para el agua are used and have reliably delivered the water values of many biotopes on earth.

In each test case and each individual test you will find references in the instructions and the water analysis sheet to the correct value ranges of the parameters for their intended purpose. In addition you receive recommendations for action which will lead to solutions, if the measured values are outside the recommended range. We distinguish here between the conventional community aquarium with fish; a plant aquarium (also called scape) with no or only a few fish; a marine aquarium; and a garden pond.

Base measurements –carry out always

In the aquarium there are four parameters which you should regularly monitor. In addition you should note the date and time of each measurement. Only then can later changes be recognised and in case of problems can appropriate measures be taken.

The following table shows you the 4 most important parameters with the ideal target values in the respective water type:

freshwater with fish freshwater without / few fish (ProScape) Estanque Agua salada Marine reef
date / time:
temperature (°C) 21 - 28 23 - 26 4 - 30 24 - 28 24 - 26
KH carbonate hardness (°dKH) 5 - 16 4 - 10 5 - 20 7 - 10 7 - 13
pH acidity 6.8 - 8.2 6.4 - 7.2 7.5 - 8.5 7.8 - 8.4 7.8 - 8.4
GH general hardness (°dGH) 8 - 25 6 - 15 8 - 30 - - - - - -

Fish mortality – common causes

If several fish die all at once it cannot be assumed that it is a normal death. If there are no noticeable symptoms of disease bad water values are often the cause. In that case the base measurements need to be carried out and to be completed with four further parameters:

freshwater with fish freshwater without / few fish (ProScape) Estanque Agua salada Marine reef
NH4 ammonium (mg/l) 0,1 0.1 0.1 0,05 0,05
NO2 nitrite (mg/l) 0.1 0,1 0.1 0.1 0.05
Cu copper (mg/l) 0.05 0.05 0.05 0.05 0.05
O2 oxygen (mg/l) 6-10 6-10 6 - 13 6-10 6-10

Problems with algae or plant growth

Everyone has experienced this at some time or another. The plants don’t grow as expected or the aquarium has an algae problem. Assuming the plants have been given the necessary technical environment (light and CO2), these two symptoms are a result of the water values. In the following posts we have already reported in detail about plant growth and the most important step to perfect growth:

1. Fertilization is not just fertilization Part 1

2. There’s more to fertilization than you’d think Part 2

3. Why is carbon dioxide (CO2) the most important plant nutrient in the aquarium?

4. Water values for water plants in detail

If plants don’t grow well algae problems are not far away. Below we have compiled eight measurable factors with target values to help you find the root cause of the problem. An imbalance of these values leads to the problems described. If you manage to return the values into the right range improvements will usually show after 2-3 weeks without having used an anti-algae agent. We only advise the supporting use of an anti-algae agent when the algae is so bad that the plants have no other means of recovery. But the water values still need to be brought within the normal range to achieve long-term success.

freshwater with fish freshwater without / few fish (ProScape) Estanque Agua salada Marine reef
conductivity 300 - 900 μS/cm 250 - 600 μS/cm 300 - 1200 μS/cm 49 - 52 mS/cm 48 - 52 mS/cm
NO3 nitrate (mg/l) 1 - 30 5 - 20 5 0 - 10 5
PO4 phosphate (mg/l) 0.4 0.5 - 1.8 0.1 0.02 - 0.1 0,02 - 0,1
SiO2 silicate (mg/l) 1.2 0.4 - - - 0.4 0,4
Fe iron (mg/l) 0.05 - 0.4 0.1 - 0.6 0.2 0.05 0,05
K potassium (mg/l) 10 - 30 10 - 30 - - - 380 - 400 380 - 420
Mg magnesium (mg/l) 5 - 10 5 - 10 - - - - - - - - -
CO2 carbon dioxide (mg/l) 15 - 30 20 - 35 - - - - - - - - -

Seawater special – coral growth and health

The classifications above also apply in the marine aquarium. The base measurements are reduced by the general hardness (GH) parameter. Three parameters have been added and as they are new water values they need to be checked during each test run,

Agua salada Marine reef
Ca calcium (mg/l) 400 - 440 420 - 480
Mg magnesium (mg/l) 1200 - 1350 1350 - 1400
Density (25°C kg/l) 1.022 - 1.026 1.022 - 1.026
Salinity (ppt) 30 - 35 30 - 35

CO2 calculation

You can calculate the CO2 content without measuring it. First measure the carbonate hardness and the pH value. Then look in the adjacent table for the row and column with the measured carbonate hardness and pH value. At the intersection point of the corresponding row and column you will find the value of the CO2 content. The area with sufficient CO2 content for ideal plant growth and pH value without an adverse effect on the fish is coloured clearly.

Recommendations for action – increasing or decreasing values

The proper documentation of the water values will help you to recognise the problems and to intervene in good time. For this purpose, we have provided you with the water analysis sheet for download: https://www.jbl.de/files/faq//672/ProAquaTest-Protokoll-Analyse.pdf

On the back you will find additional recommendations for action in case a water value requires an increase or decrease. Those who rather want to check the water values by computer instead of on paper can use the Laboratorio online JBL, análisis del agua for analysis purposes with an evaluation and instructions.

© 18.09.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Quién soy: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comentarios

Cookies: información breve y seguimos

La página web de JBL también usa varios tipos de cookies para poder ofrecerle una funcionalidad completa y muchos servicios: las cookies técnicas y funcionales son imprescindibles para que todo funcione cuando visite esta página web. También empleamos cookies para el marketing. Así podemos reconocerle cuando vuelva a visitar nuestra amplia página, medir el éxito de nuestras promociones y, mediante cookies de personalización, también podemos llamar su atención de forma individual, directa y adaptada a sus necesidades incluso fuera de nuestra página web. Usted puede determinar en todo momento –incluso con posterioridad– qué cookies desea permitir y cuáles no (más información en «Cambiar configuración»).

La página web de JBL también usa varios tipos de cookies para poder ofrecerle una funcionalidad completa y muchos servicios: las cookies técnicas y funcionales son imprescindibles para que todo funcione cuando visite esta página web. También empleamos cookies para el marketing. Usted puede determinar en todo momento –incluso con posterioridad– qué cookies desea permitir y cuáles no (más información en «Cambiar configuración»).

En nuestra política de privacidad obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos. obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos. Rogamos que confirme el uso de todas las cookies pulsando «He tomado nota» para poder continuar.

¿Es mayor de 16 años? Entonces confirme el uso de todas las cookies pulsando «He tomado nota» para poder continuar.

Elija su configuración de cookies

Cookies técnicas y funcionales para que todo funcione cuando visite nuestra página web.
Cookies de marketing para poder reconocerle en nuestras páginas y medir el éxito de nuestras promociones.

Notificaciones PUSH (emergentes) de JBL

¿Qué son las notificaciones PUSH? Como parte del estándar W3C, las notificaciones de escritorio definen una API para las notificaciones destinadas a los usuarios finales, que serán enviadas por medio de notificaciones al navegador del equipo de sobremesa y/o dispositivo móvil del usuario. Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos). Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos).

Estas notificaciones permiten al propietario de una página web ponerse en contacto con sus usuarios siempre que estos tengan un navegador abierto, independientemente de si el usuario está visitando la página web en ese momento o no.

Para poder enviar notificaciones de escritorio solo se necesita una página web con un código web push instalado. Así, las marcas que no tengan app también pueden beneficiarse de las muchas ventajas que ofrecen las notificaciones emergentes (también denominadas push, comunicaciones personalizadas en tiempo real justo en el momento adecuado).

Las notificaciones de escritorio son parte del estándar W3C y definen una API para las notificaciones destinadas a los usuarios finales. Una notificación permite notificar al usuario sobre un suceso como, p. ej., un artículo nuevo en un blog, fuera del contexto de una página web.

JBL GmbH & Co. KG ofrece este servicio de forma gratuita, el cual puede activarse tan fácilmente como se puede desactivar.