Cold at the top and warm at the bottom - why you need a pond thermometer

You may look at your pond in winter and wonder what the water temperatures are. If there is ice floating on the surface, the temperatures will be around freezing point there. But what about deeper down? Water has a special property, different from many other liquids (anomaly of water): it has its highest density at 4 °C and expands when it cools down. This is why ice floats on top of water. Pond owners often use a pond thermometer to find out what the water temperatures in their pond are. However, they should remember that most thermometers, like the JBL Termómetro estanque , float on the surface and only show the water temperature there. At a depth of one metre, the temperature will (hopefully) be higher - usually around 4 °C in winter. This is where the fish rest, winding down their metabolisms.

To find out the temperatures in your pond water at different depths, tie a knot every 50 cm in the cord starting from the thermometer, put a weight on the thermometer and lower it. Wait a few minutes until it has taken on the ambient temperature of the respective depth and pull it up quickly. This is the quickest way to find out whether everything is as it should be in your pond! If the water temperature is lower than 4 °C even in its deep parts, the "warm" deep water will probably be circulating elsewhere and your pond will freeze through. This endangers not only your fish, but also the microorganisms! Therefore, never aerate or siphon off water (for filters or watercourses) at the deepest point of the pond.

Always position pumps and air stones so that they are at least 50 cm above the ground. This way your pond and its inhabitants will survive the winter without any problems! With the new automatic pond feeder, the JBL PROPOND AUTOFOOD , a temperature sensor with a three-metre cable is included for these reasons, and the display shows the water temperature realistically.

© 15.02.2021
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comentarios

Cookies: información breve y seguimos

La página web de JBL también usa varios tipos de cookies para poder ofrecerle una funcionalidad completa y muchos servicios: las cookies técnicas y funcionales son imprescindibles para que todo funcione cuando visite esta página web. También empleamos cookies para el marketing. Así podemos reconocerle cuando vuelva a visitar nuestra amplia página, medir el éxito de nuestras promociones y, mediante cookies de personalización, también podemos llamar su atención de forma individual, directa y adaptada a sus necesidades incluso fuera de nuestra página web. Usted puede determinar en todo momento –incluso con posterioridad– qué cookies desea permitir y cuáles no (más información en «Cambiar configuración»).

La página web de JBL también usa varios tipos de cookies para poder ofrecerle una funcionalidad completa y muchos servicios: las cookies técnicas y funcionales son imprescindibles para que todo funcione cuando visite esta página web. También empleamos cookies para el marketing. Usted puede determinar en todo momento –incluso con posterioridad– qué cookies desea permitir y cuáles no (más información en «Cambiar configuración»).

En nuestra política de privacidad obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos. obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos. Rogamos que confirme el uso de todas las cookies pulsando «He tomado nota» para poder continuar.

¿Es mayor de 16 años? Entonces confirme el uso de todas las cookies pulsando «He tomado nota» para poder continuar.

Elija su configuración de cookies

Cookies técnicas y funcionales para que todo funcione cuando visite nuestra página web.
Cookies de marketing para poder reconocerle en nuestras páginas y medir el éxito de nuestras promociones.

Notificaciones PUSH (emergentes) de JBL

¿Qué son las notificaciones PUSH? Como parte del estándar W3C, las notificaciones de escritorio definen una API para las notificaciones destinadas a los usuarios finales, que serán enviadas por medio de notificaciones al navegador del equipo de sobremesa y/o dispositivo móvil del usuario. Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos). Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos).

Estas notificaciones permiten al propietario de una página web ponerse en contacto con sus usuarios siempre que estos tengan un navegador abierto, independientemente de si el usuario está visitando la página web en ese momento o no.

Para poder enviar notificaciones de escritorio solo se necesita una página web con un código web push instalado. Así, las marcas que no tengan app también pueden beneficiarse de las muchas ventajas que ofrecen las notificaciones emergentes (también denominadas push, comunicaciones personalizadas en tiempo real justo en el momento adecuado).

Las notificaciones de escritorio son parte del estándar W3C y definen una API para las notificaciones destinadas a los usuarios finales. Una notificación permite notificar al usuario sobre un suceso como, p. ej., un artículo nuevo en un blog, fuera del contexto de una página web.

JBL GmbH & Co. KG ofrece este servicio de forma gratuita, el cual puede activarse tan fácilmente como se puede desactivar.