Carbonate Hardness and pH: Life Insurance for your Pond

It’s a hard life for a pond: It is exposed to all weather conditions, it gets unwanted rainwater and it has to digest leaves, flower pollen and any particulate matter that enters.

Rainwater sounds positive at first for most of us. Clean free natural water. Putting aside the matter of air pollution, let’s take a look at the composition of the rainwater: In principle rainwater is distilled water and therefore free of minerals. And just that is the problem. Tap and well water contain minerals, which are essential for the functioning of the pond, whether it’s a garden or koi pond. They are the water’s life insurance with all the living organisms they contain. The minerals in question are called general hardness and carbonate hardness. Let us start with the carbonate hardness, whose meaning is only understood by a few people. It’s not that simple to explain it in an easily understandable way either. The minerals of the carbonate hardness have the property to bind acids and bases. During the course of the day the acidity in the pond water changes (decreases) and the pH value rises. At night the opposite happens (the acidity rises) and the pH value drops. That’s how the pH level fluctuates within certain limits. The carbonate hardness makes sure that the fluctuations in the acidity contents don’t become too large. Chemists say that the carbonate hardness buffers the pH value, meaning that both the increase and the decrease is reduced, or buffered. When the carbonate hardness falls below certain values, this effect fails and the pH value as a measure for the acidity doesn’t buffer anymore. And because a pH fluctuation from 8 to 6 doesn’t mean twice as much but 100 times more acid in the water, this is, unfortunately, a dramatic situation for the pond dwellers. All this sounds more complicated than it really is.

In a nutshell: Add the essential minerals to your pond regularly with JBL StabiloPond Basis and thus “insure” your pond against rainfall and the problems caused by pH level fluctuations. If you want to see these pH fluctuations in black and white, just use a pH test to measure your pond water once at sunrise and once just AFTER sunset. Should your pH value deviate more than 2, urgent action is needed!

The second aspect is the general hardness (GH), in other words the magnesium and calcium content of the water. With very low GH values in your pond water the fish need to expend up to 30 % more energy to attain their mineral balance (salt/water balance)! By adding JBL StabiloPond Basis regularly to your water, you can increase the mineral content of your pond water (this can drop dramatically at any time as a result of rain water intrusion) and thus reduce the stress it creates for your fish.

Suggerimenti professionali

If you want to see the fluctuations in black and white, just use a pH test to measure your pond water once at sunrise and once just AFTER sunset. Should your pH value deviate more than 2, urgent action is needed!

© 02.05.2017
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Commenti

Cookie, qualche informazione e poi continua la navigazione

Anche il sito di JBL utilizza diversi tipi di cookie per poterti offrire una funzionalità completa e molti servizi. I cookie tecnici e funzionali sono strettamente necessari al funzionamento di questo sito. Inoltre utilizziamo i cookie per il marketing. Questo ci permette di riconoscerti alla tua prossima visita sul nostro vasto sito, di misurare il successo delle nostre campagne pubblicitarie e, tramite i cookie di personalizzazione, di rivolgerci a te individualmente e in modo diretto adattandoci ai tuoi bisogni, anche al di fuori del nostro sito web. Puoi decidere quali cookie accettare e quali rifiutare (per maggiori informazioni vedi "Modificare le impostazioni") in qualunque momento – anche in un momento successivo.

Anche il sito JBL utilizza diversi tipi di cookie per poterti offrire una piena funzionalità e molti servizi: i cookie tecnici e funzionali sono necessari per permetterti una comoda visita del nostro sito. Inoltre utilizziamo i cookie per ragioni di marketing. Puoi decidere in qualsiasi momento – ora o più tardi – quali cookie accettare e quali no (vedi di più sotto "Modificare impostazioni").

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. Ti preghiamo di confermare con "Accetto" l'utilizzo di tutti i cookie.

Hai più di 16 anni? Allora conferma l'utilizzo di tutti i cookie con "Ho preso atto" – e potrai continuare la navigazione.

Seleziona le tue impostazioni cookie

Cookie tecnici e funzionali, per fare in modo che tutto funzioni al meglio quando visiti il nostro sito.
Cookie di marketing, per riconoscerti sulle nostre pagine web e per poter misurare il successo delle nostre campagne pubblicitarie.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.