PAR measurements in the aquarium - The strength of the JBL LED SOLAR

How much photosynthetically active radiation (=PAR) really reaches the aquarium plants?

Aquarium fans (fortunately!) know it’s better not to have colourful aquarium lighting and that bright lighting has little in common with lighting quality (e.g. fluorescent tubes in living rooms). During their evolution plants have adapted to the spectral components of sunlight and now use a range between 380 and 780 nm (blue to red) for photosynthesis. These are the wavelengths that chlorophyll and other pigments use to supply the plant with energy.

It’s very important to JBL that the JBL LED SOLAR lamps generate high PAR values to make your aquarium plants grow well. But what happens to the PAR value at increasing water depths? No one has ever measured how the PAR value changes under water and how it behaves at different colour temperatures.

To find out, the 1 m deep Koi aquarium at the JBL Research Centre was turned into a diving tank. Biologist Heiko Blessin brought along his diving suit and diving equipment to measure the lamps under water using a PAR meter. The PAR meter was placed in a waterproof mobile phone case and the sensor head was slowly moved back and forth in the direction of the light at different depths. Elena Hänle, JBL’s chemistry expert, noted the highest PAR value displayed at each depth on the outer pane.

The values were measured directly above the surface (5 cm distance to the JBL LED SOLAR NATUR ) and directly below the surface, then at distances of 10 cm, until they reached the bottom of the tank.

The tables show the exact values measured, with the reducing value caused by the mobile phone cover corrected. The illuminance in lux was always simultaneously measured with a luxmeter, so the lux values are also entered in the table.

Good news for the aquarium plants is that we were still able to measure 131 PAR (at 2700 K), 122 PAR (at 4000 K) and 150 PAR (at 6700 K) in 40 cm water depths! These are really excellent values, translating into extraordinary plant growth to please all aquarium owners!

The lux value was also measured, as it is a good index for the illuminance. The lumen number is irrelevant, because it can be increased at will, e.g. by amplifying the green part of the spectrum, without being beneficial to the photosynthesis of the plants. Only with the combination of the full spectrum and the high PAR value can we see how well lighting can promote plant growth!

Kelvin describes the light colour or colour temperature of light and is abbreviated with K. It is perceived by the human eye as yellowish-warm or bluish-cool.

The measurement

Tested LED: JBL LED SOLAR NATUR 68 W

Distance LED to water surface: 4-5 cm

Measurement: Below the centre of the LED. Measuring depth related to the distance to the water surface. At 80 cm water depth no value could be recorded due to the size of the PAR meter.

2700 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 0 817.8 31.2
Below the water surface 0 788.8 26
Below the water surface 10 345.68 13.2
Below the water surface 20 225.04 8.8
Below the water surface 30 157.76 6.2
Below the water surface 40 131.08 5
Below the water surface 50 114.84 4.2
Below the water surface 60 100.92 3.8
Below the water surface 70 89.32 3.2
Below the water surface 80 ND 2.6

*measured PAR values + loss factor through waterproof plastic cover (~16%)

4000 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 0 865.36 30.7
Below the water surface 0 788.8 27.8
Below the water surface 10 336.4 14.8
Below the water surface 20 229.68 9.4
Below the water surface 30 167.04 7
Below the water surface 40 121.8 5.5
Below the water surface 50 103.24 4.9
Below the water surface 60 99.76 4.1
Below the water surface 70 87 3.6
Below the water surface 80 ND 3.2

*measured PAR values + loss factor through waterproof plastic cover (~16%)

6700 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 864.2 33.9
Below the water surface 827.08 28.6
Below the water surface 10 386.28 15
Below the water surface 20 266.8 9.5
Below the water surface 30 191.4 7.1
Below the water surface 40 149.64 5.7
Below the water surface 50 125.28 5.3
Below the water surface 60 104.4 4.6
Below the water surface 70 96.28 3.4
Below the water surface 80 ND 3.2

*measured PAR values + loss factor through waterproof plastic cover (~16%)

© 27.04.2020
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Reacties

Cookies, een korte info, dan gaat het verder

Ook de JBL homepage gebruikt meerdere soorten cookies om u de volledige functionaliteit te kunnen garanderen en de benodigde service te kunnen bieden: Technische en functionele cookies hebben we absoluut nodig om ervoor te zorgen dat alles soepel verloopt tijdens uw bezoek aan onze homepage. Aanvullend zetten we cookies in voor marketingdoeleinden. Zo is het zeker dat we u bij een volgend bezoek op onze omvangrijke pagina herkennen, het succes van onze campagnes kunnen beoordelen en u, aan de hand van de gepersonaliseerde cookies, individueel en direct kunnen aanspreken kunnen – overeenkomend met uw interesses – ook buiten onze homepage. U kunt op elk moment – ook later nog – vastleggen welke cookies u accepteert en welke niet (meer daarover onder “Instellingen wijzigen”).

Ook de JBL homepage gebruikt diverse soorten cookies om u de volledige functionaliteit en talrijke diensten aan te kunnen bieden: Technisch en functionele cookies hebben we nodig om uw bezoek aan deze website te laten slagen. Daarnaast gebruiken we cookies voor de marketing. U kunt op elk moment - ook later dus nog - bepalen welke cookies u wel en welke u niet wilt toestaan (meer daarvoor onder 'Instellingen aanpassen').

In onze verklaring inzake gegevensbescherming leest u hoe wij omgaan met persoonlijke gegevens en voor welke doeleinden wij de gegevensverwerking gebruiken. leest u hoe wij omgaan met persoonlijke gegevens en voor welke doeleinden wij de gegevensverwerking gebruiken. Bevestig alstublieft met 'Gelezen en begrepen' het gebruik van alle cookies en dan kunnen we verder gaan.

U bent 16 jaar of ouder? Dan bevestigt u met "Ik heb kennisgenomen" het gebruik van alle cookies - en dan gaat het verder.

Selecteer uw Cookie-instellingen

Technische en functionele Cookies, zodat tijdens uw bezoek aan onze website alles soepel verloopt.
Marketing Cookies, zodat we u op onze pagina's herkennen en het succes van onze campagnes kunnen beoordelen.

PUSH-berichten van JBL

Wat zijn PUSH-berichten nou eigenlijk? Als onderdeel van de W3C-standaard definiëren webberichten een API voor eindgebruikerberichten, die via de browserberichten aan de desktop en/of mobiele apparaten van de gebruiker worden gestuurd. Op de eindapparaten verschijnen meldingen, zoals de eindgebruiker die kent van op het apparaat geïnstalleerde apps (bijv. e-mails). Op de eindapparaten verschijnen berichten, zoals de eindgebruiker die kent van op het apparaat geïnstalleerde apps (bijv. e-mails)

Deze notificaties maken het voor een websitebeheerder mogelijk contact op te nemen met zijn gebruikers, zolang de browser van de betreffende gebruiker openstaat – ongeacht of de gebruiker op dat moment de website bezoekt of niet.

Om web push notificaties te kunnen versturen, heb je alleen een website nodig waarop een web push code geïnstalleerd is. Hierdoor kunnen ook merken zonder apps profiteren van de vele voordelen van push berichten (gepersonaliseerde real-time communicatie op precies het juiste moment).

Webberichten zijn onderdeel van de W3C standaard en definiëren een API voor de eindgebruikerberichten. Een bericht maakt het mogelijk de gebruiker buiten de context van een website over een gebeurtenis, zoals een nieuw blogbericht, te informeren.

JBL GmbH & Co. KG biedt deze service gratis aan. De service kan net zo gemakkelijk geactiveerd, als gedeactiveerd worden.