JBL PROAQUATEST - simple yet laboratory standard - Part II

Blog post JBL PROAQUATEST - simple yet laboratory standard - Part I gave you an initial outline of our water tests in the form of test strips and colour comparison tests.  In this part I will introduce you to our colour change, turbidity and permanent tests. Let's start with the first one.

Colour change tests

Pour water from your aquarium into a vial and add the indicator until the colour changes. The colour change will vary depending on the test, e.g. with the JBL PROAQUATEST KH carbonate hardness from blue to orange. The number of drops used until the colour changes equates to the level of the measured value. If, for example, 5 drops are used before the colour changes from blue to orange, your carbonate hardness is 5 °dKH.

JBL PROAQUATEST KH Carbonaathardheid Quick test to determine the carbonate hardness (KH) in freshwater/marine aquariums and ponds. When setting up a new aquarium measure daily for the first week, afterwards measure once a week.

JBL PROAQUATEST GH Gezamenijke hardheid - Quick test to determine the general hardness in freshwater aquariums & ponds. When setting up a new aquarium measure daily for the first week, afterwards measure once a week.

JBL PROAQUATEST Ca Calcium Quick test to determine the optimal calcium content in marine aquariums for healthy and vigorous coral growth. The recommended value in marine aquariums is 390-440 mg/l. The test does not work in freshwater, as calcium is a component of the general hardness and is present in freshwater in much smaller amounts than in seawater.

JBL PROAQUATEST Mg-Ca Magnesium-Calcium - Quick test to determine the optimal magnesium/calcium content in marine aquariums for healthy and vigorous growth in corals and calciferous red algae. The recommended value in marine aquariums is 1200-1600 mg/l.

JBL PROAQUATEST CO2 Direct - Quick test to determine the carbon dioxide content (main nutrient for plants) in freshwater aquariums. Test once a week if your plants are not growing or growing badly, or if your fish are dying.

JBL PROAQUATEST POND Check pH/KH - Quick test to determine acidity and pH stability in garden ponds. The pH value should be 7.5-8.5 without much fluctuation. The KH stabilises the pH value and should be at least 4 ° dKH. KH values below 4 °dKH mean the pH value is not stable and is fluctuating intensively between 6 and 12. These strong fluctuations affect all the living organisms in the pond!

Turbidity test

Here you mix reagents with your aquarium water to create a cloudy, whitish liquid, which you then pour gradually into a scaled test tube until the cross under the test tube is no longer visible from above. Then you can read off the scale how much potassium is in your water.

JBL PROAQUATEST K Kalium - Quick test to determine the ideal potassium content to monitor fertilisation in freshwater aquariums. Too low a potassium content often leads to stagnant plant growth, even when the other factors such as CO2, iron and light are present. You can increase the K content by using fertilisers such as JBL PROFLORA Ferropol of JBL PROSCAPE K MACROELEMENTS .

Permanent test

This includes JBL PROAQUATEST CO2-pH Permanent . Here you put an indicator into a transparent container that is attached to the inside of your aquarium pane. The indicator reacts with the CO2 from your aquarium water and changes colour depending on the amount of CO2. You can compare the new colour to the scale stuck on the pane and thus read the CO2 content of your aquarium water 24 hours a day!

Finally

there is one test left in the range that actually belongs to the colour comparison tests. JBL PROAQUATEST O2 Zuurstof - Quick test to determine the current oxygen content in freshwater/marine aquariums & ponds and to decide whether measures should be taken to increase the oxygen content. Oxygen is the elixir of life for most living organisms in water and is therefore very important. The warmer the water, the less oxygen can be dissolved in the water. Have a look at our blog article on this topic JBL TV #48: Fish also need to breathe - measuring and increasing the oxygen content (O2) .

We’d like to end by giving you a few tips on how to carry out the water tests: 

  1. Always hold the bottles with the indicator liquids vertically. Then the drop size is always the same.
  2. Always discard the first drop, as it is not always the full size.
  3. After the first drop, keep a slight pressure on the bottle so that no air is drawn in and all subsequent drops come evenly.
  4. Always place the vials on a white background so that you can see the colours better during colour change tests. Always rinse the vials thoroughly with tap water after testing (distilled water would be better).
  5. If your test comes with a comparator block, use it! Manually moving the vials on the colour charts WITHOUT the comparator block will result in a different colour perception, as the plastic block shades the liquid part of the vials.

You can read more about this topic in the JBL TV #27: Testing aquarium water - this is how it works .

Do you need a new syringe or measuring spoon? Have you dropped a test tube and broken it? No problem, we can help you. The JBL onderdelenset voor watertesten removes the need to buy the entire water test. All test reagents are also available separately as a REFILL and all colour charts are bundled in the JBL PROAQUATEST assortiment kleurkaarten .

If you want to know more about this topic, then take a look at our Themeworlds Aquarium and Pond: Watertesten of De watertesten - alle parameters .

© 05.02.2023

Meer over dit onderwerp voor u

JBL TV #27: Testing aquarium water - this is how it works

Water tests for aquariums: Aquarium water can be clear and still toxic to aquarium inhabitants!
Meer lezen

JBL PROAQUATEST - simple yet laboratory standard - Part I

Aquarium water tests are similar to a blood test at the doctor's. Water tests allow you to take a look at the water composition.
Meer lezen
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Reacties

Cookies, een korte info, dan gaat het verder

Ook de JBL homepage gebruikt meerdere soorten cookies om u de volledige functionaliteit te kunnen garanderen en de benodigde service te kunnen bieden: Technische en functionele cookies hebben we absoluut nodig om ervoor te zorgen dat alles soepel verloopt tijdens uw bezoek aan onze homepage. Aanvullend zetten we cookies in voor marketingdoeleinden. Zo is het zeker dat we u bij een volgend bezoek op onze omvangrijke pagina herkennen, het succes van onze campagnes kunnen beoordelen en u, aan de hand van de gepersonaliseerde cookies, individueel en direct kunnen aanspreken kunnen – overeenkomend met uw interesses – ook buiten onze homepage. U kunt op elk moment – ook later nog – vastleggen welke cookies u accepteert en welke niet (meer daarover onder “Instellingen wijzigen”).

Ook de JBL homepage gebruikt diverse soorten cookies om u de volledige functionaliteit en talrijke diensten aan te kunnen bieden: Technisch en functionele cookies hebben we nodig om uw bezoek aan deze website te laten slagen. Daarnaast gebruiken we cookies voor de marketing. U kunt op elk moment - ook later dus nog - bepalen welke cookies u wel en welke u niet wilt toestaan (meer daarvoor onder 'Instellingen aanpassen').

In onze verklaring inzake gegevensbescherming leest u hoe wij omgaan met persoonlijke gegevens en voor welke doeleinden wij de gegevensverwerking gebruiken. leest u hoe wij omgaan met persoonlijke gegevens en voor welke doeleinden wij de gegevensverwerking gebruiken. Bevestig alstublieft met 'Gelezen en begrepen' het gebruik van alle cookies en dan kunnen we verder gaan.

U bent 16 jaar of ouder? Dan bevestigt u met "Ik heb kennisgenomen" het gebruik van alle cookies - en dan gaat het verder.

Selecteer uw Cookie-instellingen

Technische en functionele Cookies, zodat tijdens uw bezoek aan onze website alles soepel verloopt.
Marketing Cookies, zodat we u op onze pagina's herkennen en het succes van onze campagnes kunnen beoordelen.

PUSH-berichten van JBL

Wat zijn PUSH-berichten nou eigenlijk? Als onderdeel van de W3C-standaard definiëren webberichten een API voor eindgebruikerberichten, die via de browserberichten aan de desktop en/of mobiele apparaten van de gebruiker worden gestuurd. Op de eindapparaten verschijnen meldingen, zoals de eindgebruiker die kent van op het apparaat geïnstalleerde apps (bijv. e-mails). Op de eindapparaten verschijnen berichten, zoals de eindgebruiker die kent van op het apparaat geïnstalleerde apps (bijv. e-mails)

Deze notificaties maken het voor een websitebeheerder mogelijk contact op te nemen met zijn gebruikers, zolang de browser van de betreffende gebruiker openstaat – ongeacht of de gebruiker op dat moment de website bezoekt of niet.

Om web push notificaties te kunnen versturen, heb je alleen een website nodig waarop een web push code geïnstalleerd is. Hierdoor kunnen ook merken zonder apps profiteren van de vele voordelen van push berichten (gepersonaliseerde real-time communicatie op precies het juiste moment).

Webberichten zijn onderdeel van de W3C standaard en definiëren een API voor de eindgebruikerberichten. Een bericht maakt het mogelijk de gebruiker buiten de context van een website over een gebeurtenis, zoals een nieuw blogbericht, te informeren.

JBL GmbH & Co. KG biedt deze service gratis aan. De service kan net zo gemakkelijk geactiveerd, als gedeactiveerd worden.