Carbonate Hardness and pH: Life Insurance for your Pond

It’s a hard life for a pond: It is exposed to all weather conditions, it gets unwanted rainwater and it has to digest leaves, flower pollen and any particulate matter that enters.

Rainwater sounds positive at first for most of us. Clean free natural water. Putting aside the matter of air pollution, let’s take a look at the composition of the rainwater: In principle rainwater is distilled water and therefore free of minerals. And just that is the problem. Tap and well water contain minerals, which are essential for the functioning of the pond, whether it’s a garden or koi pond. They are the water’s life insurance with all the living organisms they contain. The minerals in question are called general hardness and carbonate hardness. Let us start with the carbonate hardness, whose meaning is only understood by a few people. It’s not that simple to explain it in an easily understandable way either. The minerals of the carbonate hardness have the property to bind acids and bases. During the course of the day the acidity in the pond water changes (decreases) and the pH value rises. At night the opposite happens (the acidity rises) and the pH value drops. That’s how the pH level fluctuates within certain limits. The carbonate hardness makes sure that the fluctuations in the acidity contents don’t become too large. Chemists say that the carbonate hardness buffers the pH value, meaning that both the increase and the decrease is reduced, or buffered. When the carbonate hardness falls below certain values, this effect fails and the pH value as a measure for the acidity doesn’t buffer anymore. And because a pH fluctuation from 8 to 6 doesn’t mean twice as much but 100 times more acid in the water, this is, unfortunately, a dramatic situation for the pond dwellers. All this sounds more complicated than it really is.

In a nutshell: Add the essential minerals to your pond regularly with JBL StabiloPond Basis and thus “insure” your pond against rainfall and the problems caused by pH level fluctuations. If you want to see these pH fluctuations in black and white, just use a pH test to measure your pond water once at sunrise and once just AFTER sunset. Should your pH value deviate more than 2, urgent action is needed!

The second aspect is the general hardness (GH), in other words the magnesium and calcium content of the water. With very low GH values in your pond water the fish need to expend up to 30 % more energy to attain their mineral balance (salt/water balance)! By adding JBL StabiloPond Basis regularly to your water, you can increase the mineral content of your pond water (this can drop dramatically at any time as a result of rain water intrusion) and thus reduce the stress it creates for your fish.

Expert Tip

If you want to see the fluctuations in black and white, just use a pH test to measure your pond water once at sunrise and once just AFTER sunset. Should your pH value deviate more than 2, urgent action is needed!

© 02.05.2017
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Komentarze

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.