JBL PROTEMP e500
Grzałka zewnętrzna do akwariów słodkowodnych od 160 do 600 litrów

  • Grzałka przepływowa, która jest zintegrowana w wężu akwariowego filtra zewnętrznego i tak grzałka W akwarium staje się zbędna
  • Prosty montaż: Przeciąć wąż filtra zewnętrznego, którym woda wraca do akwarium, wetknąć w to miejsce grzałkę zewnętrzną, włączyć wtyczkę do gniazdka i nastawić zadaną temperaturę wody
  • Dzięki zamontowaniu w obiegu filtracji osiąga się bardzo równomierny rozkład temperatury wody w akwarium z dokładnością pomiaru +/- 0,5 °C i przedziałem przełączania 1,0 °C
  • Wyświetlacz LED aktualnej i zadanej temperatury. Wymienne, nakręcane (3/4'') przyłącza węży do 12/16, 16/22 i 19/25 mm z zabezpieczeniami węży. Łączna długość 30,5 cm
  • W zestawie: 1 Grzałka przepływowa 500 W do akwariów 160-600 l (100-150 cm) z przyłączami węży do 12/16, 16/22 i 19/25 mm i szczotką do czyszczenia
Więcej
Cena: 57,35 €
Sugerowana cena sprzedaży z VAT
Ten artykuł znajdą Państwo w sklepach specjalistycznych i internetowych
Informacje o produktach

Większość ryb akwariowych pochodzi z wód tropikalnych i potrzebują temperatury wody pomiędzy 22 i 30 °C. W akwariach wielogatunkowych z rybami/bezkręgowcami z różnych regionów sprawdziła się temperatura wody 24-26 °C. Tylko do hodowli np. paletek dyskowców sensowne jest 30 °C. Wiele gatunków krewetek pochodzi z chłodniejszych wód i nie toleruje temperatur 25-30 °C.

Temperatura wody powinna być ustawiona za pomocą "regulowanej grzałki", która automatycznie reguluje temperaturę. Do tego istnieją regulowane grzałki w kształcie pręta, które są mocowane w akwarium (JBL ProTemp s) o różnej mocy i grzałki zewnętrzne/grzałki przepływowe, które są zintegrowane w wężu wody powracającej z filtra zewnętrznego (JBL ProTemp e) w dwóch wariantach mocy. Zaleta grzałek zewnętrznych polega na tym, że jest o jeden produkt mniej, który trzeba zmieścić W akwarium i rozprowadzenie ciepła w akwarium jest równomierniejsze. Poza tym elektroniczny wyświetlacz grzałki zewnętrznej pokazuje zawsze wyraźny odczyt aktualnej temperatury wody. Grzałki zewnętrzne można także zasilać za pomocą oddzielnej pompy wody.

Ogrzewanie podżwirowe NIE służy do regulacji temperatury wody. Podżwirowy kabel grzewczy zapewnia lepszy przepływ wody przez podłoże w akwarium, ponieważ podgrzana woda podnosi się przy kablu grzewczym i wpływa w obszarach pomiędzy kablami grzewczymi. Tak składniki pokarmowe są dostarczane do korzeni i zapewniają perfekcyjny wzrost roślin. Podżwirowe kable grzewcze muszą być zawsze uzupełnione "grzałką główną" (JBL ProTemp s lub e).

Filmy wideo
Szczegóły

JBL PROTEMP e500

Nr Art.:
6042800
Numer EAN:
4014162604286
W:
500
Do:
160-600 l
Pojemność Opakowanie:
2.6 l
Masa brutto:
500 g
Masa netto:
400 g
Przeliczenie wagi:
0
Wymiary opakowania (dł/wys/sz):
85/350/90 mm

Właściwości

Gatunek zwierzęcia: Aksolotl, Arowana, Bojowniki, Brzanki, Błędnikowce, Danio, Dyskowce, Długonosowate, Flowerhorn, Gourami, Gupik, Karasie złociste, Karpieńcokształtne, Kiryski, Kraby, Krewetki Macrobrachium, Krewetki karłowate, Kąsaczowate, Małże, Motylowce, Młode ryby, Pielęgnice (Ameryka Południowa), Pielęgnice papuzie, Piskorzowate, Platany szponiaste, Prętniki, Raczki karłowate, Rozdymkowate, Skorupiaki, Sumowate, Szczupieńczykowate, Tęczankowate, Welony, Wielopłetwcowate / Trzcinniki, Ślimaki, Żyworodne, Żółwie błotne
Wielkość zwierzęcia: Dla wszystkich wielkości zwierząt
Grupa wiekowa zwierząt: Wszystkie zwierzęta akwariowe i terrariowe
Materiał: Tworzywo sztuczne (PC) / szkło
Kolor: ciemnoszary

Etykieta elektroniczna / Żarówki

Rtęć: Nie
Możliwość ściemniania: Nie

Dane techniczne

Zawartość w litrach:600 l
Zawartość od - do:160-600l
Zawartość dla długości zbiornika:150 cm
Moc W:500 W
Wysokość:295 mm
Długość:90 mm
Szerokość:80 mm
Napięcie:240 V
FAQ
What does the indication E-1 to E-8 on the display of my external heater mean?

As already described in the operating instructions, E stands for Error and indicates an error in the operation of the JBL PROTEMP external heater. Here you can see how each message can be easily solved.

E-1: Cause: Water temperature is at least 1 °C above the set temperature. Solution: Regulates itself when water temperature drops.
E-2: Cause: No water or air bubbles in the heater. Solution: Ensure that the heater is positioned as vertically as possible and that there is sufficient water flow.
E-3: Cause: Electronics defective. Solution: Can only be fixed by a specialist.
E-8: Cause: Temperature above 93°C. No water flow, or the inside is too soiled. Solution: Clean the inside of the heater with a hose brush (see chapter 8 Maintenance) and ensure sufficient water flow.

Does the alignment of the external heater matter during its installation?

Yes, because temperature measuring requires constant contact with the water. When installing, please pay attention to the flow direction marked by arrows on the heater housing. Attach the heater to the suspension loop provided for this purpose in a position as vertical as possible with the flow direction pointing upwards. This is the only way to ensure that the device is vented and that the temperature measuring functions properly.

What water pressure are the PROTEMP e in-line heaters designed for?

This device may only be used for heating aquariums in the private area. For this purpose, the in-line heater is connected to an external filter or a feed pump. These systems are unpressurised systems which only use the principle of circulation and do not build up any pressure, as the inlet and outlet also provide an additional drain and the impeller does not build up any water pressure when pumping. The use of accessories or parts not recommended by the manufacturer can lead to hazardous situations and a loss of warranty. Installations on pressure pumps or directly on water pipes are therefore not possible.

Where should you install the external heater?

First place the JBL PROTEMP e In-line heater on the outlet side of the external filter, before positioning the UV-C units, CO2 diffusers and other attachments. If this is not possible, you can still install the heater after the UV-C unit, but then only install diffusers behind it.

Blog (Opinie & Doświadczenia)

JBL TV #54 The right water temperature – all the facts about temperature in the aquarium

A conversation with the chief biologist of the Sealife Centre in Speyer about issues which can arise in some water temperatures.

Więcej

JBL TV #49: Saving energy in the aquarium - reducing costs made easy

Yes, we can make energy savings in our aquarium, but not where most people think! In this video we show exactly where and how to save electricity costs.

Więcej

JBL TV #24: Aquarium heaters and aquarium coolers

What temperatures do our aquarium inhabitants have in the wild? How can you heat and cool your aquarium simply and effectively?

Więcej

JBL TV #19 Part 1: Aquarium Set-Up - Aquarium Technology - Where Do You Put The Heater And Filter?

Installing aquarium technology, where do you put the heater and filter?

Więcej

The JBL Intern - Aquariums in the Company

When I first entered the administrative offices, I was very impressed by the display aquariums in the boss's office and in the various conference rooms.

Więcej

Heating in the aquarium. Heating rods vs. outdoor heaters

Our houses aren’t the only things to need heating. Our fish habitats, or aquariums, also need to be kept at a constant, feel-good temperature. This can vary from aquarium to aquarium and needs to be individually regulated.

Więcej

Video: JBL PROTEMP e External Heater for Aquariums - Keeping Electricity and Technology Outside the Aquarium

External heaters remove the need for bothersome heating elements in the aquarium and are safe because the electricity stays outside. The installation could not be easier.

Więcej

Display Accuracy vs. Measuring Accuracy - Different Results When Measuring Temperatures

You may find the differences that can arise when measuring the temperature with different measuring instruments and methods, confusing. Most people tend to trust a digital device more than an analog device. Is this justified?

Więcej
Prasa

19.12.2019

JBL PROTEMP e - Heating The Inside From Outside

Nobody likes a heater in an aquarium: it’s as attractive as an old stove pipe and contains a full 230 volts. The alternative is as simple as it’s logical:

Więcej
Do pobrania

Instrukcja obsługi

Dodatkowe informacje o produktach i materiały do pobrania

Wskazówki dotyczące bezpieczeństwa

  • Wskazówka dotycząca bezpieczeństwa dla urządzeń technicznych
    • Nazwa pliku:
      JBL_Sicherheitshinweis_fuer_Technische_Geraete.pdf
    Do pobrania
Części zamienne
Osprzęt
Recenzje klientów

Opinie

Łączna ocena: 4.6
28 Publiczna/-e ocena/-y dla tego produktu.

2 Recenzje

LadyDiscus
2022-07-17T01:51:21Z

Polecam !


discus_my_passion_
2021-02-15T19:23:32Z

Super produkt ! :)


25 Wyświetlanie innych opinii w innych językach

25 Recenzje w innych językach

aquaristik_influencer - Niemiecki
2024-03-16T00:25:49Z

cool wäre wenn man beim protemp500 die hysterese selber verändern könnte um in Aufzucht Becken weniger Temperatur Schwankungen zu haben

ideal wäre auch eine wifi Funktion um die Temperatur immer und überall im auge haben zu können und man eine push Benachrichtigung erhaltet bei Temperatur Schwankung etc


S. Klöcker - Niemiecki
2023-11-06T12:44:17Z

Super Heizung für mein 540L Malawibecken. Kein Heizstab mehr im Becken. Klare Kaufempfehlung


M. Lengle - Niemiecki
2023-04-07T20:46:46Z

Habe mir zwei von e 500 für meine Becken 240l und 450l bestellt. Nach dem Einbau ist der Durchlauferhitzer vom 450l Aquarium nach kurzer Zeit so heiß geworden das, das Gehäuse verkokelt ist. Am Geruch konnte ich es rechtzeitig Melekeok und das Gerät abschalten. Darauf hin hab ich den zweiten Durchlauferhitzer aus dem 240l Aquarium untersucht. Der läuft seit Januar im Becken mit. Und da hab ich festgestellt das das Ausengehäuse auch leicht verformt ist.

Ich habe beide vorsichtshalber vom Netz genommen und beim Verkäufer reklamiert. Habe auch zwei neue Geräte bekommen bin mir aber noch nicht ganz sicher ob ich das noch mal versuchen sollte. Die defekten Durchlauferhitzer sind aus dem Jahr 2022. vielleicht ist es auch eine fehlerhafte Produktionseinheit.


P. Reinhold - Niemiecki
2023-01-26T19:04:38Z

JBL PROTEMP e500

Außenheizer für Süßwasserwasser Aquarien von 160 bis 600 Liter

Ich hatte jetzt 3 verschieden Hersteller gehabt und die waren sehr Stark am Schwanken von -3 bis 6Grad aber der hält Konstant die Temperatur im Becken daher eine sehr gute Entscheidung gewesen für das Produkt


P. Hergenröther - Niemiecki
2023-01-08T19:22:46Z

Ich bin begeistert. Eine Heizung im Becken ist ja okay. Aber wenn man drauf verzichten kann ist es doch noch besser. Der Diskus mag nicht so gerne schwankende Temperaturen und mit diesem tollen Gerät habe ich eine sehr konstante Temperatur. Super einfache Montage an den Filter und kinderleicht ein zu stellen.


C. Dutzig - Niemiecki
2022-10-01T13:29:42Z

Das nenn ich mal Fortschritt, vor 25JAHREN gab es so etwas noch nicht. Funktioniert super, hat zwar 500Watt aber so selten wie die zu heizen muss ist das alles ok.


Discus.forest - Niemiecki
2022-09-19T15:55:11Z

Nutze den PROTEMP e500 in meinem 450 Liter Diskus Becken. Ich bin sehr zufrieden damit ! Die Temperatur ist konstant auf 28 grad. Am Display kann man die soll und ist Temperatur ganz einfach ablesen. Klare Kaufempfehlung!


T. Kappler - Niemiecki
2022-07-10T13:59:04Z

Seit ca. 6 Monaten in Betrieb. Die 500W beheizen mein 1000L Becken auch im Winter sehr zuverlässig.

Die Isolierund der Heizung nach Aussen könnte jedoch etwas besser sein, das Gerät gibt beim Heizen nicht nur viel Wärme an das Wasser, sondern auch an die Umgebung ab. Wünschenswert wäre auch, eine Justierbarkeit des Temperaturfühlers. Dieser hat fast 2°C Abweichung zu meinen anderen Thermometern. Wenns man weiß, kein Problem.

Wegen den 2 Punkten ein Stern Abzug. Aber ansonstens Empfehlenswert, würde es wieder kaufen.


tropheus_italia - W?oski
2022-03-14T20:49:59Z

Ottimo riscaldatore, con questo oggetto non c’è più bisogno del riscaldatore direttamente in vasca, veramente un ottima idea.


M. Alparslan - Niemiecki
2022-02-16T18:45:40Z

Habe es jetzt seit 10 Tagen im Betrieb . Es lässt sich Dank der verschiedenen Zollgrößen an alle gängigen Schläuche anschließen. Temperatur ist konstant auf 25 Grad das in meinem 540 LG Becken . Ein Thermometer Brauch ich auch nicht mehr da der Display die momentane Temperatur anzeigt .. für mich alternativlos und Top im Preis .

LG Mithat


S. Gleirscher - Niemiecki
2022-02-01T09:45:52Z

Super Produkt, läuft schon seit einem Jahr in meinem 550L Diskusbecken und hält die Temperatur konstant auf ca. 28°C.


fishrimps9 - Hiszpański
2022-01-04T10:57:38Z

Enero, 10º en la calle, el calentador programado a 25º y la temperatura del agua se mantiene estable, no cabe duda que fue una buena compra


Aqua4Scape - Niemiecki
2021-11-24T19:26:42Z

Super leicht einzustellen. Hält die Temperatur ideal im eingestellten Bereich


P. Van Minsel - Holenderski
2021-10-11T14:56:27Z

german_monstertank - Niemiecki
2021-10-11T12:16:57Z

An 4 Becken zuhause angeschlossen und bis jetzt top zufrieden mit dem Produkt


fishrimps9 - Hiszpański
2021-09-04T17:23:40Z

6 meses despues sigue manteniendo la temperatura estable en 26º en 300 litros


aquascaping.tv - Niemiecki
2021-07-08T16:33:03Z

Naprawdę polecam grzałki przepływowe a szczególnie JBL PROTEMP. Solidne wykonanie i jeden sprzęt poza akwarium do bardziej estetyczne wyglądające akwarium.


diskusowner - Niemiecki
2021-05-25T17:45:16Z

Hier hat Jbl einfach mal wieder bewiesen wie innovativ das Unternehmen ist. Es gibt kein besseres System auf dem Markt, welches das Aquarium so gut aufheizt und dabei trotzdem nicht sichtbar ist. Für mich ist dieses Produkt einfach alternativlos und ich kann es jedem nahe legen der auf ein hohes Maß an Ästhetik in seinem Becken achtet.


U. Röhr - Niemiecki
2021-05-18T10:05:46Z

Ich lass mich mal Überraschen,ob ich auf 29 grad in meinen 400 L. Becken komme Ich habe sehr viele Sachen von JBL,sind alle super.Gebe erstmals nur 3 Sterne

Komentarz od JBL:

Danke Ulrich, die 29 Grad wirst du erreichen, wenn die Außentemperatur nicht mehr als 5-6 °C abweicht und das Aquarium von Außen zu stark kühlt.


JustTheD90 - Niemiecki
2021-05-08T13:22:17Z

Ich durfte jetzt den JBL ProTemp e500 über mehrere Monate testen, vorne weg, ist dies einer der wenigen Inline Heizer die man auf dem Markt finden kann. Auch wenn ich diesen tatsächlich nur an einem 54 Liter Becken betreibe.

Der Heizer heizt gut und einigermaßen schnell das Wasser auf, ein überschwingen der Temperatur, selbst bei diesem überdimensionierten Heizer konnte ich nicht feststellen.

Weiterhin Positiv aufgefallen ist die Möglichkeit alle gängigen schlauch großen mit anzuschließen.

Was mich tatsächlich stört: Der Heizer bietet keine Möglichkeit zur Wand Befestigung, woraus ein durchgehender Zug am schlauch resultiert. Ich selber konnte mir per 3D Druck eine Wandhalterung drucken. Meiner Meinung nach sollte aber eine Möglichkeit mitgeliefert werden. Daher nur 4 Sterne


malawidortmund - Niemiecki
2021-04-07T13:30:28Z

Hatte ihn auch im Einsatz ! TOP einfaches handling 👍🏼


fishrimps9 - Hiszpański
2021-03-26T12:52:33Z

se me rompio mi calentdor interno y ahora gracias a este, queda mejor el acuario y me aseguro que el agua sale ya caliente desde el fltro mejorando la temperatura


R. van der Velden - Holenderski
2021-02-02T19:00:50Z

der_ aquariumschrank - Niemiecki
2021-01-25T12:16:56Z

Ein Super Produkt ich bin mehr als zufrieden und kaum noch Technik im Becken


aquaristik_influencer - Niemiecki
2021-01-14T23:37:08Z

perfekt um die ganze Technik im Unterschrank zu verstauen

Digitale Temperatur ablesbar

verstellbar in 0,5Grad stufen

sehr zuverlässig


Proszę zalogować się, aby oddać swoją ocenę produktu.

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.