JBL LED SOLAR Cabo de conexão

Disponibilidade:
Preço de venda recomendado, incl. IVA Portes de envio não incluídos
Vendedores perto de si
Pode encontrar este artigo na sua loja da especialidade e na venda online
Informações sobre o produto
Detalhes

JBL LED SOLAR Cabo de conexão

N.º de artigo:
6192800
Número EAN:
4014162619280
Para :
Natur
Para :
Effect
Volume embalagem:
0.670 l
Peso ilíquido:
28.000 g
Peso líquido:
24 g
Conversão de peso:
0
Dimensões (c/a/l):
30/150/150 mm
FAQ
Can I operate an LED SOLAR EFFECT unit on its own?

The operation of the LED SOLAR EFFECT on its own does not provide the lighting, which is absolutely necessary for fish and plants, in sufficient quantities. Due to the existing plug configuration, which has been selected for your safety, the LED SOLAR EFFECT must be operated together with a LED SOLAR NATUR. If you individually purchase the LED SOLAR EFFECT which is intended only as a supplement to the LED SOLAR NATUR, you will not have all the necessary accessories. This is why you only find the driver (power supply), the IR receiver and the remote control in the box of SOLAR LED NATURE. And that’s why the LED SOLAR EFFECT can only be operated in combination with the LED SOLAR NATUR.

Can I connect two LED SOLAR NATUR units to just one power supply?

Unfortunately this is not possible - you will need two power supplies. One driver (power supply) has the capacity to connect one LED SOLAR NATUR and one LED SOLAR EFFECT, which together create an efficient and ideal aquarium lighting. If you need a high power light aquarium and have a particularly large number of plants, you can easily install another LED SOLAR NATUR with another driver, which is included with each LED SOLAR NATUR kit free of charge. The power supply cannot handle the power of two LED SOLAR NATUR units. Therefore, we strongly advise against the use of a home-made adapter.

Can the LED SOLAR be placed directly on a glass brace?

LEDs produce heat, which the metal heat sink on the back of the JBL LED SOLAR dissipates. In order to avoid unwanted discoloration on the protective glass, uneven illumination in the aquarium and heat problems on the LED, the LED SOLAR NATUR and EFFECT units should always be mounted at a distance of min. 1 cm to the material below (e.g. a glass brace). The brackets enclosed for installing them as a top assembly or the wire suspension mean that no direct contact is necessary. Installing a retrofit in the tube socket is likewise safe.

Can I operate several LED SOLAR units with one remote control?

You can operate several IR receivers with one remote control. In doing so, the IR receiver needs to be mounted near or at the aquarium cabinet so that it can be reached unimpeded by the IR signals of the remote control. All remote controls work with the same wavelength. This enables you to operate all the receivers with just one remote control unit.

Why are there several T5 adapters in the package?

While you may have thought that all 24 W T5 tubes have the same length, there are in fact many different lengths with the same wattage on the market.That's why we've included two different adapters to facilitate a safe and easy installation. In case of an unsuccessful installation attempt, please try an alternative adapter from the box.

Mostrar mais FAQs ...
Blogue - Opiniões e experiências

21.09.2018

Misunderstandings – typical beginner mistakes

Based on our own experience in customer service and the many messages and questions we receive, we have put together the typical mistakes beginners may make. The experienced aquarist might well smile, but if they are honest, these are mistakes we all made at the start, aren’t they?

Saiba mais

12.07.2018

Changeover To JBL LED - Conversion Table

You can see from the following table which LED light fits in your cover or can be used to replace your current T5 or T8 fluorescent tubes. In the first line you can also see the wattage each JBL LED light consumes and you can calculate the electricity savings compared to the wattage of your previous fluorescent lamp.

Saiba mais
Imprensa

23.08.2018

Everyone’s thrilled with JBL LEDs

At 8 am on August 3, 2018 the first JBL LED lights left the JBL factory in Neuhofen and by August 5 the first pet shop shelves had them on display. For the first time aquarium enthusiasts were delaying their purchase to wait for a JBL product to be in stock.

Saiba mais
Descarregar

Indicações de segurança

  • Instruções de segurança para acessórios
    Nome do ficheiro:
    safety_instructions_zubehoer.pdf
    Tamanho:
    17 kByte
    Descarregar