Keeping an eye on the most important water values

Professional water analysis – this sounds punishingly expensive. It makes you think of a laboratory which sends you back a record sheet with results which you don’t know how to use, as with your blood values. But the professional water testing in your aquarium or pond at home also works on a high level and above all it is simple and inexpensive. Also on the Expeditions JBL Water test are used and have reliably delivered the water values of many biotopes on earth.

In each test case and each individual test you will find references in the instructions and the water analysis sheet to the correct value ranges of the parameters for their intended purpose. In addition you receive recommendations for action which will lead to solutions, if the measured values are outside the recommended range. We distinguish here between the conventional community aquarium with fish; a plant aquarium (also called scape) with no or only a few fish; a marine aquarium; and a garden pond.

Base measurements –carry out always

In the aquarium there are four parameters which you should regularly monitor. In addition you should note the date and time of each measurement. Only then can later changes be recognised and in case of problems can appropriate measures be taken.

The following table shows you the 4 most important parameters with the ideal target values in the respective water type:

freshwater with fish freshwater without / few fish (ProScape) Vijver seawater Marine reef
date / time:
temperature (°C) 21 - 28 23 - 26 4 - 30 24 - 28 24 - 26
KH carbonate hardness (°dKH) 5 - 16 4 - 10 5 - 20 7 - 10 7 - 13
pH acidity 6.8 - 8.2 6.4 - 7.2 7.5 - 8.5 7.8 - 8.4 7.8 - 8.4
GH general hardness (°dGH) 8 - 25 6 - 15 8 - 30 - - - - - -

Fish mortality – common causes

If several fish die all at once it cannot be assumed that it is a normal death. If there are no noticeable symptoms of disease bad water values are often the cause. In that case the base measurements need to be carried out and to be completed with four further parameters:

freshwater with fish freshwater without / few fish (ProScape) Vijver seawater Marine reef
NH4 ammonium (mg/l) 0,1 0.1 0.1 0,05 0,05
NO2 nitrite (mg/l) 0.1 0,1 0.1 0.1 0.05
Cu copper (mg/l) 0.05 0.05 0.05 0.05 0.05
O2 oxygen (mg/l) 6 - 10 6 - 10 6 - 13 6 - 10 6 - 10

Problems with algae or plant growth

Everyone has experienced this at some time or another. The plants don’t grow as expected or the aquarium has an algae problem. Assuming the plants have been given the necessary technical environment (light and CO2), these two symptoms are a result of the water values. In the following posts we have already reported in detail about plant growth and the most important step to perfect growth:

1. Fertilization is not just fertilization Part 1

2. There’s more to fertilization than you’d think Part 2

3. Why is carbon dioxide (CO2) the most important plant nutrient in the aquarium?

4. Water values for water plants in detail

If plants don’t grow well algae problems are not far away. Below we have compiled eight measurable factors with target values to help you find the root cause of the problem. An imbalance of these values leads to the problems described. If you manage to return the values into the right range improvements will usually show after 2-3 weeks without having used an anti-algae agent. We only advise the supporting use of an anti-algae agent when the algae is so bad that the plants have no other means of recovery. But the water values still need to be brought within the normal range to achieve long-term success.

freshwater with fish freshwater without / few fish (ProScape) Vijver seawater Marine reef
conductivity 300 - 900 μS/cm 250 - 600 μS/cm 300 - 1200 μS/cm 49 - 52 mS/cm 48 - 52 mS/cm
NO3 nitrate (mg/l) 1 - 30 5 - 20 5 0 - 10 5
PO4 phosphate (mg/l) 0.4 0.5 - 1.8 0.1 0.02 - 0.1 0,02 - 0,1
SiO2 silicate (mg/l) 1.2 0.4 - - - 0.4 0,4
Fe iron (mg/l) 0.05 - 0.4 0.1 - 0.6 0.2 0.05 0,05
K potassium (mg/l) 10 - 30 10 - 30 - - - 380 - 400 380 - 420
Mg magnesium (mg/l) 5 - 10 5 - 10 - - - - - - - - -
CO2 carbon dioxide (mg/l) 15 - 30 20 - 35 - - - - - - - - -

Seawater special – coral growth and health

The classifications above also apply in the marine aquarium. The base measurements are reduced by the general hardness (GH) parameter. Three parameters have been added and as they are new water values they need to be checked during each test run,

seawater Marine reef
Ca calcium (mg/l) 400 - 440 420 - 480
Mg magnesium (mg/l) 1200 - 1350 1350 - 1400
Density (25°C kg/l) 1.022 - 1.026 1.022 - 1.026
Salinity (ppt) 30 - 35 30 - 35

CO2 calculation

You can calculate the CO2 content without measuring it. First measure the carbonate hardness and the pH value. Then look in the adjacent table for the row and column with the measured carbonate hardness and pH value. At the intersection point of the corresponding row and column you will find the value of the CO2 content. The area with sufficient CO2 content for ideal plant growth and pH value without an adverse effect on the fish is coloured clearly.

Recommendations for action – increasing or decreasing values

The proper documentation of the water values will help you to recognise the problems and to intervene in good time. For this purpose, we have provided you with the water analysis sheet for download: https://www.jbl.de/files/faq//672/ProAquaTest-Protokoll-Analyse.pdf

On the back you will find additional recommendations for action in case a water value requires an increase or decrease. Those who rather want to check the water values by computer instead of on paper can use the Water Analysis Online Laboratory for analysis purposes with an evaluation and instructions.

© 18.09.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

About me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.