In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
The ProTemp CoolControl is connected between the power supply and the ProTemp Cooler. It is therefore not possible to connect two coolers to one controller. Each Cooler needs its own controller.
Yes, the CoolControl of the predecessor range can also regulate the new ProTemp Cooler x200 and x300 (generation 2) aquarium coolers.
The cross-flow fan provides an audible air flow that is uniform and must not rattle or clatter. However, if such a problem does occur, it could be an indication of damage from a fall or strong impacts on the enclosure wall. Check that the cross-flow fan is correctly mounted or if the housing is incorrectly assembled. If these are not the causes your ProTemp Cooler must be returned to the factory for inspection and repair by the JBL customer service.
The cross-flow fan of the cooler 200X or 300X conveys a large amount of air to ensure sufficient evaporation on the water surface and thus cooling. As with a room fan, this is not possible silently, but can be quiet. To ensure quiet operation, the fan is mounted with a ball bearing for smooth running. If loud noises should occur during operation, please check the fastening on the aquarium edge / base. The vibrations are probably transmitted to the base and can be eliminated by small changes. If you notice strong vibrations on the housing, this can be eliminated by turning the housing.
Yes, because the test strip will continue to react further. That’s why a strip can only be used once. A repeat measurement would result in different values, as these change considerably after 70+ seconds. Please note that the value for chlorine is to be read after a few seconds.
Stelle deine Frage an das JBL Service Team.