JBL PROAQUATEST PO4 REFILL

Determination of phosphate levels for optimal plant growth or possible causes of algae in fresh/salt water and ponds

12.32 EUR

Price incl. 16 VAT plus Delivery
In stock – delivered to you in 1-3 working days
Shop locator

Product features

  • Determines the phosphate value for perfect plant growth or possible cause of algae growth in freshwater/marine water & ponds
  • Laboratory comparator system to compensate the inherent water colour: fill glass vials with sample water, add reagents to a vial, place vials in holder, read values off colour chart
  • Use: when setting up a new freshwater or marine aquarium: once a week. With algae problems and for checking tap water
  • You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium or Pond
  • Package contents: 1 test kit for approx. 50 measurements, incl. 3 reagents (2x reagent 2), 2 glass vials with screw caps, syringe, dosing spoon, comparator block and colour scale. Reagent refill separately available

Noch offene Fragen?

In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.

  • What happens if I use the wrong side of the spoon for the powder?

    Your test result will remain clear or appear slightly yellow, although phosphate may be present. If your test kit has not expired or has been open for more than 9-12 months, this is a clear indication that you have used the wrong side of the spoon. _x000D_ The small side of the spoon should only be levelly filled and is in the place normally used to hold it. For clarification, take a look at the picture below.

    War diese Antwort hilfreich?
  • The instructions point out that the comparator block should be used to compare the colours. Can this be done without the comparator block as well ? Or is there a factor from this comparison that is required for the measurement ?

    The colour charts are intended to be used with the comparator block. In addition, when the comparator block is used with the blank water sample, this compensates the inherent water colour._x000D_ _x000D_ Therefore, if the comparator block is not used, there will most likely be deviations in the readings.

    War diese Antwort hilfreich?
  • My nitrate test indicates measurement results which I can’t read or which are far too low.

    The reason is often an incorrect use of the test. It is important to shake the test vigorously for precisely one minute. All the other important steps can be read in the instructions.

    War diese Antwort hilfreich?
  • Unequal consumption of individual water test reagents

    The liquids of one reagent are empty, the powder is still half-filled. Can't you just buy individual bottles? No, because the JBL refill packs always contain all the reagents as a set and need to be replaced together. There is a reason for this. The reagents age when they are first opened and should therefore be disposed of completely as soon as one of the reagent bottles is empty. The unequal consumption is due to the fact that some test procedures require an individual number of drops, depending on the existing value in the aquarium water. So one needs more, the other less. The liquids can be emptied completely. In the case of powder, you cannot use the quantity you need if there is only a residual amount left. Thus the quantity is on the generous side, so that the range is ensured even with low liquid consumption.

    War diese Antwort hilfreich?
  • Where can I find the record sheets for the documentation of my water analysis?

    Have you lost your record sheets, used them all up, or need them in another language? _x000D_ In the appendix of this FAQ you will find PDF files for printing them out in German, English and French.

    War diese Antwort hilfreich?
  • Why are there different recommendations and values on the colour chart of the water test?

    With the JBL PROAQUATEST drop tests you have a laboratory comparator system which compensates the inherent colouration of the water and at the same time enables non-chemists to carry out an accurate and safe water analysis. To ensure that water testing monitors the life of your fish and provides the greatest possible safety, you will find an evaluation adaptable to three different applications. _x000D_ _x000D_ Above the different coloured measuring points are numbers, three symbols and a colour band for each. _x000D_ _x000D_ The symbols stand for the following applications: _x000D_ Fish = freshwater _x000D_ Koi = garden pond _x000D_ Starfish = marine water _x000D_ _x000D_ The colour band tells you the meaning of the value determined in green (everything OK), yellow (attention) and red (need for action). In addition you will find numbers that reflect the value in mg/l for the respective colour field. _x000D_ _x000D_ The first two (freshwater and pond) colour bands belong to the upper number row. Marine water belongs to the lower number row. _x000D_ _x000D_ Why do the values differ? _x000D_ Due to the high salt concentration in marine water, the colouring of the reaction is not as intense as in freshwater (which also includes pond). Consequently, the value for the same colouration is greater than in freshwater _x000D_ _x000D_ Why do the recommendations differ? _x000D_ Every habitat reacts differently to certain nutrient concentrations. In the garden pond, for example, constantly changing temperatures and light intensity can jeopardise the value more than in freshwater, where, unlike in the pond, these factors are constant and necessary additives are supplied. That’s why the recommendations are green for one area of application, yet yellow for the other._x000D_ _x000D_

    War diese Antwort hilfreich?
  • Are polyphosphates in the aquarium detected by a PO4 drop test?

    No, the drop tests JBL PROAQUATEST PO4 Phosphate Koi and JBL PROAQUATEST PO4 Phosphate Sensitive do not detect polyphosphates. Depending on the pH value, the polyphosphates decompose slowly in the aquarium. As soon as they have decomposed, the two tests can detect the phosphate inside.

    War diese Antwort hilfreich?

Antwort nicht gefunden?

Stelle deine Frage an das JBL Service Team.

Information and consent to cookies & third-party content

We use technically necessary cookies/tools to offer, operate and secure this service. Furthermore ,with your express consent , we use cookies/tools for marketing, tracking, creating personalised content on third-party sites and for displaying third-party content on our website. You can revoke your consent at any time with effect for the future via the menu item ‘Cookie settings’.
By clicking on ‘Allow all’, you give us your express consent to the use of cookies/tools to improve the quality and performance of our service, for functional and personalised performance optimisation, to measure the effectiveness of our ads or campaigns, for personalised content for marketing purposes, including outside our website. This enables us to provide personalised online ads and extended analysis options about your user behaviour. This also includes accessing and storing data on your device. You can revoke your consent at any time with effect for the future via the menu item ‘Cookie settings’.
You can use the ‘Change settings’ button to grant and revoke individual consent to the cookies/tools and receive further information on the cookies/tools we use, their purposes and duration.
By clicking on ‘Only absolutely necessary’, only technically necessary cookies/tools are used.

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for.

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

A notification makes it possible to inform the user about an event outside the context of a website, such as a new blog post, a competition or a voucher.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.