JBL PROAQUATEST Ca REFILL
Item no. 2413319
Product features
- Simple and reliable monitoring of the aquarium water values. Determines the optimal calcium value for vigorous and healthy coral growth
- Easy to use: Fill cuvette with sample water, add reagents and count drops until colour changes. Number of drops x 20 = Ca content
- Reach: the number of measurements depends on the level of the calcium content
- You will find detailed information and troubleshooting tips about water analysis on the JBL website in Essentials/Aquarium
- Package contents: 1 Ca test kit, incl. 3 reagents, plastic cuvette, syringe, dosing spoon. Reagent refill separately available
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
Why doesn’t ProScape work on my mobile?
In order to determine the photometric measuring results accurately ProScan needs a camera with autofocus. This is the only way to determine the results with maximum precision. Not having one could prevent you from downloading the app from the store. Moreover the app requires the Android version 7.0 or higher or iOS 13.0 or higher. It is compatible with iPhone, iPad and iPod touch, as well as with 5100 Android smartphone and tablet types. If the download in the store doesn’t work, your mobile is probably incompatible with one of the above mentioned points. If there are any problems during use, e.g. with the scanning, please contact our customer service team: www.jbl.de/en/support .
-
Why are there no colour charts for GH. KH, Mg /Ca saltwater and CO2 direct?
The tests from the test range: JBL GH test, JBL KH test, JBL calcium test Ca and JBL magnesium test Mg, where the number of drops are counted until the colour changes and the counted value is multiplied by a value: _x000D_ _x000D_ GH = number of drops = general hardness in °dH _x000D_ _x000D_ KH = number of drops = carbonate hardness in °dH _x000D_ _x000D_ CO2 = number of drops * 2 = CO2 in mg/l _x000D_ _x000D_ Magnesium + calcium = number of drops * 120 = amount Ca + Mg in mg/l _x000D_ _x000D_ Calcium = number of drops * 20 = amount Ca in mg/l _x000D_ _x000D_ Magnesium = amount Ca+Mg from magnesium test - amount Ca in mg/l = magnesium in mg/l
-
Why doesn’t the thermometer stick to the pane?
Please clean the pane thoroughly before you install the thermometer. Algae, biofilms and lime can prevent it from sticking. If the thermometer still doesn’t hold, there may be a problem with the suction cup. Due to a material defect some suction cups have bubble-like excrescences which prevent a correct hold. If you own such a suction cup, please contact our customer service, and provide a photo.
-
The instructions point out that the comparator block should be used to compare the colours. Can this be done without the comparator block as well ? Or is there a factor from this comparison that is required for the measurement ?
The colour charts are intended to be used with the comparator block. In addition, when the comparator block is used with the blank water sample, this compensates the inherent water colour._x000D_ _x000D_ Therefore, if the comparator block is not used, there will most likely be deviations in the readings.
-
My nitrate test indicates measurement results which I can’t read or which are far too low.
The reason is often an incorrect use of the test. It is important to shake the test vigorously for precisely one minute. All the other important steps can be read in the instructions.
-
When do I use JBL OxyPond?
JBL OxyPond is used to combat oxygen deficiency. Oxygen deficiency develops mainly during the winter under an ice cover, or during the summer in high temperatures. The oxygen content of water is temperature dependent. At a water temperature of 0°C the maximum oxygen content is 14.16 mg/l, whereas at a water temperature of 30°C it is only 7.53 mg/l.
-
Why don’t the CO2 bubbles dissolve after reinstallation / cleaning?
After reinstallation the bubbles move only haltingly through the diffuser and sometimes merge into large bubbles. The device needs approx. 48 hours to set up! After that a bio-film will have formed on the surface of the device, allowing the bubbles to rise freely upwards. After the running in time the required bubble count will adapt itself for your aquarium.
-
Where can I find the record sheets for the documentation of my water analysis?
Have you lost your record sheets, used them all up, or need them in another language? _x000D_ In the appendix of this FAQ you will find PDF files for printing them out in German, English and French.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.