JBL PROTEMP e501
Product features
- In-line heater integrated into the hose of the external aquarium filter, removing the need for a heater INSIDE an Aquarium
- Easy installation: cut through the hose from the external filter that feeds the water back into the aquarium, insert the external heater in between, insert the plug and set the water temperature you want
- The integration in the filter circuit ensures a very even distribution of the water temperature with an accuracy of +/- 0.5 °C and a switching interval of 1.0 °C in the aquarium
- LED display of current and desired temperature. Interchangeable, screw-on (3/4'') hose connections for 12/16, 16/22 and 19/25 mm incl. hose securing. Total length 30.5 cm
- Package contents: 1 in-line heater 500 W for aquariums from 160-600 l (100-150 cm) with hose connections for 12/16, 16/22 and 19/25 mm and cleaning brush
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
Where should you install the external heater?
First place the JBL PROTEMP e In-line heater on the outlet side of the external filter, before positioning the UV-C units, CO2 diffusers and other attachments. If this is not possible, you can still install the heater after the UV-C unit, but then only install diffusers behind it.
-
What water pressure are the PROTEMP e in-line heaters designed for?
This device may only be used for heating aquariums in the private area. For this purpose, the in-line heater is connected to an external filter or a feed pump. These systems are unpressurised systems which only use the principle of circulation and do not build up any pressure, as the inlet and outlet also provide an additional drain and the impeller does not build up any water pressure when pumping. The use of accessories or parts not recommended by the manufacturer can lead to hazardous situations and a loss of warranty. Installations on pressure pumps or directly on water pipes are therefore not possible._x000D_ _x000D_
-
Are PROTEMP e external heaters also suitable for marine aquariums?
The JBL PROTEMP e300 and e500 are external heaters for freshwater aquariums and are not intended for use in marine water, as salt crusts, caused by splashing water, can stick to the outside of the filter tank in marine aquariums. This can damage the display and other external components.
-
Does the alignment of the external heater matter during its installation?
Yes, because temperature measuring requires constant contact with the water. When installing, please pay attention to the flow direction marked by arrows on the heater housing. Attach the heater to the suspension loop provided for this purpose in a position as vertical as possible with the flow direction pointing upwards. This is the only way to ensure that the device is vented and that the temperature measuring functions properly.
-
Can two adapters be combined?
No, this is not possible. You can only ever make one change with the JBL PROFLORA adapters. u95 --> u500, one-way Dennerle --> u001 or u001 --> m001. _x000D_ _x000D_ Example: If you use the small 95 g CO2 cartridges with the JBL PROFLORA u201 pressure reducer to supply CO2 to your aquarium, you can make a connection from the u201 to the u500 disposable cylinders with the existing pressure reducer using the adapter from the JBL PROFLORA range. This means that the JBL PROFLORA u201 pressure reducer can be used with the JBL PROFLORA u500 disposable CO2 cylinders. The pressure reducer remains unchanged. This means that no further "adaptation" with the JBL PROFLORA CO2 ADAPT U - M is possible. This also applies to all other combinations of adapters. _x000D_
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.