JBL PhosEx Pond Direct 4,95l
Item no. 2739700
In stock – delivered to you in 1-3 working days
Shop locator
Product features
- For pond water to suit both fish and plants: reliable removal of algae nutrient phosphate from the pond water
- Simple treatment: calculate the required quantity, mix with pond water in watering can, distribute evenly over the pond
- Eliminates the basic nutrients of all types of algae: significant reduction of high phosphate contents (already after 2-24 hours)
- Without any harmful side effects: harmless to fish, no release of aluminium, indicates its effectiveness through brownish water. discolouration.
- Contents: phosphate remover for ponds, PhosEx Pond Direct. Dosage: 40 ml for approx. 800 l pond water
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
I have successfully combatted the algae, but they have come back. Why have they returned and how can I prevent it?
The main cause of algae in garden ponds is too much light and too many nutrients. When combatting the algae, the nutrients bound in them are released, but then during the next spell of fine weather with sufficient light these nutrients are in the pond again ready to feed the next algae attack. _x000D_ _x000D_ Preventive measure: JBL PhosExPond direct precipitates phosphates, they are removed from the water and from the algae. JBL PhosExPond filter permanently binds phosphates and limits their value. Having dealt with the algae JBL BactoPond can then be applied to minimize the nitrigen compounds. JBL SediExPond helps reduce the sludge at the bottom of the pond with its heterotrophic (all eating) strains of bacteria. _x000D_ _x000D_ JBL AlgoPond Sorb adds natural humic substances to the water and through its slight amber colouring reduces the excessive amount of light entering the garden pond. This in turn results in a significant reduction of algae growth.
-
Can I use JBL PhosEx Pond Direct directly after JBL AlgoPond?
Do not use JBL PhosExPond Direct directly after JBL AlgoPond Forte. It is better to wait for about 3-4 days, until the algae have been visibly reduced and the nutrients, stored in the algae cells, have been released. Only then is the phosphate precipitation with JBL PhosExPond Direct useful and effective. _x000D_ _x000D_ The same also applies to the control of thread algae with JBL AlgoPond Direct and the follow-up treatment with JBL PhosEx Pond Direct.
-
Can the pond care products StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, JBL SediEx Pond, JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL AlgoPond Green*, JBL PhosEx Pond Direct, JBL BactoPond be used with an operating UV-C water clarifier without any problems or should the UV-C unit be switched off?
In simple terms we can say that when applying the liquid products JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL AlgoPond Green*, JBL PhosEx Pond Direct, JBL BactoPond the UV-C water clarifier should be temporarily switched off so that the active substances will not be destroyed. Please look up the time periods in the respective operation instructions. _x000D_ _x000D_ With JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, JBL SediEx Pond the UV-C water clarifier may remain in operation. _x000D_ _x000D_ * Labelling according to EU Directive 98/8/EC: Use biocides safely. Always read the label and product information before use!
-
Can JBL PhosEx Pond Direct be used in stainless steel tubs?
JBL PhosEx Pond Direct attacks inferior stainless steels. Because an assessment of the used steels without technical data sheets is not possible, we recommend not using JBL PhosEx Pond Direct in stainless steel tubs.
-
How high is the binding capacity of 500 ml PhosExPond Direct?
500 ml JBL PhosExPond Direct adsorbs up to 22,500 mg phosphate.
-
How much time should pass after the application of JBL PhosEx Pond Direct before the UVC water clarifier can be put back into operation?
There is no general answer to this question. _x000D_ _x000D_ JBL PhosEx Pond Direct binds the soluted phosphates present by means of a chemical precipitation, which means a transformation into a non- (or under certain chemical conditions) water soluble form. How much time now has to pass before a UVC water clarifier is put again into operation strongly depends of the circulation rate, which means how long it needs till the whole water has passed the pond filter. _x000D_ _x000D_ Furthermore the existing current / water movement in the pond and the way that JBL PhosEx Pond Direct is added has to be taken into consideration. The time period is shorter with an extensive distribution, i.e. with a (plastic) watering can and with a good water movement than with an addition concentrated in one spot in a garden pond with slow water movement. _x000D_ _x000D_ Besides the distribution the water temperature is also relevant (though this only needs to be mentioned in passing here). _x000D_ _x000D_ The switch-off period needs to be at least twice as long as it takes for the pond water volume to completely circulate. To be on the safe side with the phosphate precipitation a turn-off time period of 48 hours can be considered as being sufficient.
-
Even after multiple applications of PhosEx Pond Direct, the phosphate test still indicates a deep blue as maximum value.
This means the phosphate value was so high, that the application of PhosEx Pond direct was not detectable in measurements. The value of the dissolved phosphate was simply several times higher. In this case it’s best to dilute the water sample with distilled water or another phosphate-free water before the test, in order to determine the real phosphate value. _x000D_ _x000D_ Alternatively PhosEx Pond Filter can be very useful.
-
Can I use several anti-algae agents together in the pond?
Each JBL anti-algae agent has a special purpose. It is therefore not necessary to use several AlgoPond products at the same time. Use AlgoPond Green to combat green water. Use AlgoPond forte for thread algae and all other types of algae. If you want to change the product, allow a time interval of 14 days, a water change of at least 50 % and filtering via activated carbon. The products StabiloPond and PhosEx may, of course, be used together with an AlgoPond algae agent according to the 1-2-3 algae-free principle.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.