JBL StabiloPond Basis 1kg
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
StabiloPond Basis and KH raise the hardness, always and without exception. If the hardness hasn’t increased measurably there are only 3 possible reasons: _x000D_ _x000D_ - The pond has no filtering or circulation. Then a layering of the water occurs. The hardened water is located near the bottom of the pond. _x000D_ - The products were under-dosed_x000D_ - An increase in hardness occurred, but the values dropped afterwards quickly. _x000D_ _x000D_ The latter is mainly possible with high sludge quantities or with an algae plague. It is as if microbes and algae (have to) exist on the back burner when there isn’t enough stabilised water. Just like other organisms in the pond they suffer from a lack of essential minerals, like calcium, magnesium and especially hydrogencarbonates. Metaphorically speaking, they pounce upon the dissolving salts in StabiloPond Basis and KH and immediately start to assimilate them. These effects can occur in ponds with strong organic loads (sludge) and excessive algae blooms. In the latter case an algae treatment is absolutely necessary._x000D_
Each JBL anti-algae agent has a special purpose. It is therefore not necessary to use several AlgoPond products at the same time. Use AlgoPond Green to combat green water. Use AlgoPond forte for thread algae and all other types of algae. If you want to change the product, allow a time interval of 14 days, a water change of at least 50 % and filtering via activated carbon. The products StabiloPond and PhosEx may, of course, be used together with an AlgoPond algae agent according to the 1-2-3 algae-free principle.
Stelle deine Frage an das JBL Service Team.