Phosphate: The cause of tomorrow’s algae is in your pond now.

Many pond owners don’t realise this. That’s why they don’t react to algae growth until it’s too late. This is not only annoying, it makes it harder to achieve clear water for your dream landscape. We will help you to avert the classic pitfalls, so that you never have to cope with the situation.

The cause of tomorrow’s algae is in your pond now: phosphates (PO4). You will have noticed many changes in and around your pond in the autumn and winter. Plants died off, leaves fell into the water and quite a bit of sludge (a sediment layer) collected on the bottom. On top of that come other phosphate sources you don’t really notice: The phosphorus deposition into German waters is about 23,000 t per year (data from 2005, source: Federal Environment Agency). If you convert this value into a single square metre water surface, this equates to a phosphorus deposition of 2683 mg / m², which works out as a phosphate deposition of 8229 mg per m². For a 2 m deep pond in rectangular shape this would entail a phosphate load of 4.1 mg/l per year.

Like many other pond owners you have probably never vacuumed your pond bottom, even though excrement, dead leaves and food remains create a steadily growing sediment layer, which can’t be removed from the pond by the pump or the filter. Although this is biologically active, it is also a large reserve for the unwanted algae nutrient phosphate (PO4). That way a sediment layer several centimetres thick can release up to 0.6 mg phosphate into the water per day. In heavily over-fertilized waters values have been found as high as 12 mg.

But even with a clean pond bottom a large amount of phosphate can be dissolved in the water. It’s better to test with a fine scale phosphate test ( JBL PROAQUATEST PO4 Phosphate Sensitive ) the content in your pond water. This should not be detectable all year round, otherwise it could lead to large thread and floating algae blooms.

Algae and sludge already present carry phosphates, which are not measurable with a test. When they die off or release their nutrients these phosphates are available for new algae. This is why you always need to remove algae and sludge mechanically from large surfaces in order to completely remove the nutrients from your pond system.

As general prevention measure we recommend you vacuum up the sludge in spring and in autumn, check the PO4 content every 2 to 4 weeks, and continuously collect the newly created nutrients using a filter media ( JBL PhosEX Pond Filter ). Especially in springtime an increased entry of the unwanted substance is caused by pollen, blossoms and insects.

Generously planting your pond with bank-side and marsh plants, water lilies and floating plants will give the algae some competition for their nourishment. The remaining phosphates will be quickly used up to help the plants grow and your pond will look great all year round – a real feel-good oasis.

© 04.04.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

About me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.