JBL PROFLORA Taifun M
CO2 high-performance diffuser

There are successor products for this item:
PROFLORA CO2 TAIFUN SPIRAL 10
  • Loss-free enrichment with main plant nutrient carbon dioxide: CO2 diffuser for freshwater aquariums max. 400 l in volume, min. 30 cm in height
  • Easy to install: connect the diffuser with special hose to the CO2 fertiliser system (not included), using suction holder place in the aquarium
  • Visible and efficient diffusion of CO2, operation without additional pump, no separate bubble counter required, easy to clean, can be dismantled completely, suitable for all common CO2 systems, extendable
  • Collection cap to prevent CO2 loss, sturdy Makrolon, up to max. 400 l at 4 °KH, up to 200 l at 10 °KH
  • Package contents: CO2 high-performance diffuser, ProFlora Taifun, size: 190 mm, incl. 2 m special CO2-proof hose
Find out more
Price: 25,78 €
Recommended retail price incl. VAT

You may also be interested in

Product information

Easy installation
The diffuser is suitable for all common CO2 systems. Connection to CO2 hose with 4/6 mm. Mount the diffusor with suction cups in the aquarium. The right amount of CO2 is different for each aquarium and depends on the volume, water movement and planting of the aquarium. The CO2 content can be checked by means of a CO2 test.

Reactors/diffusers:
In the aquarium, the CO2 gas should now be dissolved in the water so that it is available to the plants as staple food. For this purpose there are several possibilities available: In the JBL PROFLORA TAIFUN P a ceramic disc forms the connection to the water. The CO2 is pressed through in tiny bubbles and dissolves in the aquarium water on its way to the surface. For this reason, diffusers should always be placed as low as possible below the water surface. The only exception is the JBL PROFLORA DIRECT, which is integrated into the water-returning hose from the external filter. It also has a ceramic membrane through which the CO2 enters the water and dissolves on its way from the filter back into the aquarium.
In the JBL PROFLORA TAIFUN S5 and M the CO2 bubbles rise upwards as in a round parking garage driveway and dissolve in the parking garage i.e. in the aquarium water. A residual of bubbles still reaches the top, but it hardly contains any CO2. On its way up the bubble has also absorbed gases from the aquarium water (O2 etc.). So don't worry about wasting too much CO2! For the very concerned, the bubble remains are collected in a chamber at the top. Both diffusers TAIFUN S5 and M can be extended with modules (JBL PROFLORA TAIFUN Extend) if your aquarium requires more CO2 or if you are changing to a larger aquarium. Their length is only limited by the aquarium height.
.

Videos
Details
This product is unfortunately no longer available

JBL PROFLORA Taifun M

Art. no.:
6446000
EAN Code:
4014162644602
Size:
19 cm
Range:
50-400 l
Volume packaging:
1.17 l
Gross weight:
236 g
Net weight:
200 g
Weight factor:
1000
Packaging dimensions (l/h/w):
60/380/70 mm

Properties

Animal species: Armored catfish, Arowana, Axolotl, Barbels, Bettas, Bichirs/reedfish, Blowfish, Catfish, Cichlids (South America), Clawed frogs, Clawed shrimps, Crayfish, Crustaceans, Danions, Discus, Dwarf crayfish, Dwarf shrimps, Flowerhorn, Gill maggots, Goldfish, Gouramis, Guppy, Juvenile fish, Killifish, Livebearers, Loaches, Mussels, Newts, Panchaxes, Rainbowfish, Snails, Spiny eels, Tetra, Veiltails, blood parrot cichlids, freshwater butterflyfish
Animal size: For all animal sizes
Animal age group: All aquarium fish
Volume habitat: > 400 L
Material: plastic (PC)
Colour: transparent / black

Electronic label / illuminant

Mercury: No
Dimmable: No

Technical Data

FAQ
How can I remove the hose from the device?

At first the air hoses and special CO2 hoses can easily be pushed on the connection piece. The hoses harden more and more as the months go on and can only be removed from the connection piece using great force. If you pull the hose hard it will only strain the connection, which could, in the worst case, even break off. Instead cut the hoses you want to remove laterally at the ends and carefully remove them. For this it’s always advisable to install hoses with some reserve in its hose length.

Why don’t the CO2 bubbles dissolve after reinstallation / cleaning?

After reinstallation the bubbles move only haltingly through the diffuser and sometimes merge into large bubbles. The device needs approx. 48 hours to set up! After that a bio-film will have formed on the surface of the device, allowing the bubbles to rise freely upwards. After the running in time the required bubble count will adapt itself for your aquarium.

The clips of the JBL Taifun reactor are broken. What can the reason for this be ?

The clips are made of plexiglass and therefore wear very slowly. Excessive stretching or pulling can however strain the material. It is therefore important to remove the reactor by pulling it forward and not sideways. The breaking of the clips is a sign of over-stretching.

The CO2 bubbles in the JBL ProFlora Taifun rise very quickly but do not decrease in size much. Large bubbles escape from the top of the Taifun at short intervals.

Please extend the JBL ProFlora Taifun by using extension modules (JBL ProFlora Taifun Extend). Too many bubbles are being added for this reactor and its overall height. The extension will extend the reaction path and improve the CO2 dissolution.

Blog (opinions & experiences)

JBL TV #1: Why do plants need a CO2 system in the aquarium?

In this video, biologist Heiko Blessin explains why plants need CO2 at all, why aquarium plants have different requirements and how to connect a JBL CO2 system. CO2 fertilisation for aquariums has never been explained more simply or more understandably!

Find out more

Misunderstandings – typical beginner mistakes

Based on our own experience in customer service and the many messages and questions we receive, we have put together the typical mistakes beginners may make. The experienced aquarist might well smile, but if they are honest, these are mistakes we all made at the start, aren’t they?

Find out more

Measuring the CO2 Content With Drop Test (VIDEO)

This way of directly determining the CO2 content will help you to set the ideal bubble count on your CO2 system and to monitor the quantity you add.

Find out more

Outline: Fertilisation in the Aquarium

The JBL plant care concept leads to vigorous and healthy growth even with the most demanding aquatic plants. JBL has all the components you need, whether it’s a fertiliser, a bottom substrate or a fully automatic CO2 fertiliser system.

Find out more

Components of a ProFlora CO2 System: The Right Setup

Below you will find an outline graphic with examples to explain the structure and interconnections of all the CO2 components.

Find out more

Plant aquarium in fast motion with or without CO2

Have you ever had the chance to see how big the difference really is between a plant aquarium with and without CO2 fertilisation?

Find out more

Why plants grow better with CO2

The discussion, whether aquariums also work without CO2, is as old as modern aquatics itself. One thing is clear: aquatic plants need carbon for their growth.

Find out more

Water values for water plants in detail

If we transfer this Liebig’s Law of the Minimum to the aquatic field it quickly becomes clear how important balanced fertilisation is for plant aquariums.

Find out more

The story of liquid CO2 fertilisation – The Reliability

In the fourth part of the series “The story of liquid CO2 fertilisation” we examine what we consider to be the most important aspect. The health of your animals but also of you, the aquarium owners is our number one priority.

Find out more

The story of liquid CO2 fertilisation – The Reliability

In the fourth part of the series “The story of liquid CO2 fertilisation” we examine what we consider to be the most important aspect. The health of your animals but also of you, the aquarium owners is our number one priority.

Find out more

The story of liquid CO2 fertilisation – The CO2 Content

In the third part of our series “The story of liquid CO2 fertilisation,” we look at the CO2 content of the “liquid CO2” products which are added to the aquarium.

Find out more

The story of liquid CO2 fertilisation – The Effect

In the second part of the series “The story of liquid CO2 fertilisation” we examine how glutaraldehyde containing products work on plants.

Find out more

The story of liquid CO2 fertilisation – The Substance

In the first part of the series “The story of liquid CO2 fertilisation” we look at the active substance of the products considered liquid CO2.

Find out more

The story of liquid CO2 fertilisation

A lot of aquarists are talking about liquid CO2, which is said to be able to replace a conventional pressurized gas system or a bio-CO2 system.

Find out more

Why is carbon dioxide (CO2) the most important plant nutrient in the aquarium?

Carbon dioxide is the nutritional basis for aquatic plants which is supplemented through micro and macronutrients and light. The balance between all these elements is necessary for thriving plant growth in the aquarium.

Find out more

Interzoo 2016 – JBL ProFlora CO2 fertiliser systems now even better

The new ProFlora CO2 fertiliser system is the last great innovation we presented at the world's leading trade fair, and it too is even better than its predecessor model. We would like to briefly explain why this is so.

Find out more

Interzoo 2016 – Introducing JBL’s innovations at the world's leading trade fair

From May 26 to May 29, 2016 the world’s leading trade fair Interzoo opened its doors for the 34th time in Nuremberg. The trade fair, exclusively aimed at the specialist trade, showcased product innovations from all over the world.

Find out more

There’s more to fertilization than you’d think Part 2

Simply put, Liebig’s Law of the Minimum states that the growth of plants is limited by the scarcest resource. Adding a nutrient which already exists in abundance does not influence the growth.

Find out more

Fertilization is not just fertilization Part 1

Unlike in natural waters, aquariums with fish mostly have a surplus of nutrients caused by feeding and the resulting fish excrement. Thus nitrates and phosphates in large (often too large!) quantities are available for the plants.

Find out more

Oxygen Explosion in the Aquarium – The Right Fertilisation

Every evening my aquarium resembles a “whirlpool“ with a thousand little oxygen bubbles. This is the time I relax and wind down after a long day.

Find out more

Garten- & Zooevent 2015 – Innovations and Information

At last, last weekend, we presented our product innovations to a wide audience of specialists at the ”Garten- & Zooevent” in Kassel . After some short product training, our general manager Roland Böhme took to the stand and introduced his favourite new item.

Find out more
Press

21.10.2015

There is only one CO2 system which is better than the JBL ProFlora CO2 fertilisers

The new JBL ProFlora fertiliser systems are even better than their predecessors: They can now be mounted without using tools (thanks to a new knurled nut at the pressure regulator), have an attractive design thanks to their new silver safety cage and the new key component:

Find out more
Laboratories and calculators

ProScape dosage calculator

Here you can calculate the optimal supply for your aquarium with the JBL ProScape fertilizers. In order to supply the aquatic plants with exactly the right amount of fertilizer, we recommend dosing in two steps.

Water Analysis Online Laboratory

Enter your water parameters and get an in-depth analysis of your values in a matter of seconds. You enter your water values – and we analyse! Here you have the opportunity to enter the measured water values directly into the JBL Online Laboratory. This will analyse your values and explain and submit corrective measures.
Reference guide (Themeworld)

Plant growth

Are your aquarium plants growing as well you want? Here’s how to achieve perfect plant growth

Reducing problematic water values

How to lower critical water values.

Deficiency symptoms

Here’s how to prevent deficiency symptoms in fish and plants

Algae control

Here’s how to combat algae successfully and lastingly.

Plant care

What maintenance measures do your aquarium plants need?

Daily care

How much daily or weekly care is involved? What are the basic maintenance measures for your aquarium?

CO2

Why is CO2 so important for plant care? What benefits does CO2 fertilisation provide?

Fertilising

Why do aquarium plants need to be fertilised?

Plant species

Which plant species suit your aquarium? What demands do the individual species have?

Installation technical items

How and where in the aquarium do you fix and install technical items? Tips and tricks for the installation of all technical aquarium products

Plants

Which aquarium plants are best? What’s the best way to plant them?

CO2 plant fertilisation

How important is CO2 plant fertilisation? Why do your plants need additional CO2? How does a CO2 system work?

Biotope (habitat) aquarium types

A real piece of the Amazon or, with the Congo, a piece of the heart of Africa. A habitat (biotope) aquarium is a challenge. Can you emulate nature?

Aquascaping aquarium type JBL Dreamscape®

Mountains, valleys, meadows and fish! Create your dreamlike landscape under water with the Dreamscape® aquarium

Jungle aquarium type JBL Rio Pantanal®

A bit of jungle river in your living room. Lively underwater action! No problem with the JBL Rio Pantanal® aquarium

Rocky reef aquarium type JBL Malawi Rocks®

The fish of Lake Malawi are as colourful as the fish in the coral reefs. This aquarium brings a bit of freshwater reef into your living room

Goldfish aquarium type JBL Goldfish Paradise®

Lively goldfish in the aquarium enhance any room perfectly! Invite some new flatmates into your home with this goldfish aquarium.
Download

Instructions

safety instructions

  • safety instruction for accessories
    • Filename:
      safety_instructions_zubehoer.pdf
    Download
spare parts
accessories
Customer reviews

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.