JBL PROFLORA CO2 PROFESSIONAL SET V
449.96 EUR
Prix TTC 5 Prix HT Expédition
In stock – delivered to you in 1-3 working days
Recherche de revendeurs
Caractéristiques du produit
- CO2 fertiliser system with automatic CO2/pH control to supply all aquarium plants in freshwater aquariums from 40 to 600 l ideally. CO2 cylinder (disposable or refillable) and factory-fresh pH electrode to be purchased separately
- Simple assembly: screw pressure reducer onto CO2 cylinder (not included), connect solenoid valve to CO2 control unit, hose to bubble counter/check valve and reactor. Attach pH electrode (not included). Set CO2/pH control unit
- No hose slippage thanks to hose screw connections, check valve prevents water from entering the cylinder. Pressure gauges show cylinder and working pressure. Pressure reducer fits disposable and refillable CO2 cylinders
- The CO2/pH Control unit measures the pH value (CO2-dependent) via the pH electrode (not included) and automatically regulates the CO2 supply via the solenoid valve until the ideal pH value with the correct amount of CO2 is reached
- Package contents: pressure reducer with solenoid valve, CO2/pH computer, 3 m hose, bubble counter with check valve, TAIFUN SPIRAL CO2 reactor + extension set
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
The pressure reducer cannot be removed
Your system is probably still under pressure. Close the cylinder valve and remove the CO2 hose from the pressure regulator fitting. Open the regulating screw and release the pressure still present in the pressure regulator until both pressure gauges show 0 bar. Loosen the connecting nut of the pressure regulator fitting from the cylinder valve.
-
The working pressure on the pressure gauge does not change
When you adjust the working pressure, the CO2 addition needs to be running actively, otherwise the change will not be immediately visible in the event of a reduction. An increase is also visible without running CO2, but not immediately. That’s why you need to ensure that CO2 is added during the adjustment process for every reduction or increase.
-
Should I use several check valves on my CO2 installation?
True to the motto, better safe than sorry, some aquarists install several check valves in the same circuit. For example, if you use the JBL PROFLORA direct inline diffuser or the JBL PROFLORA CO2 Count Safe bubble counter, you already have an integrated check valve. If you also use a separate check valve (JBL PROFLORA SafeStop), there may be problems with the opening of the check valves. This effect can be observed if, after the night switch-off or interruption of the supply with the controller, the addition does not restart automatically. Please note that, depending on the working pressure and the number of bubbles, a few minutes may pass between the start of the supply and the visible entry of CO2 into the aquarium. _x000D_ Each spring in a check valve needs a certain pressure to be opened. Several springs can therefore interfere with each other and, depending on the distance between the two check valves, reduce the pressure at the spring to such an extent that it remains closed. Therefore, please always use only one check valve for your CO2 installation.
-
What is the minimum working pressure I need to use the JBL CO2 accessories?
All check valves or backflow protectíons from JBL require a working pressure of at least 0.6 bar for the valve to open. This feature can be found in the JBL PROFLORA CO2 TAIFUN SAFESTOP, COUNTSAFE and INLINE. The JBL PROFLORA TAIFUN diffusers also all already work with this pressure. A higher working pressure is not necessary, which is why all accessories also work with the JBL PROFLORA BIO SETs (except JBL PROFLORA CO2 STARTER BIO SET). Due to installation, a slightly higher working pressure than 0.6 bar may be necessary due to long hoses and other components, which is why the presetting of 1.2 bar is sufficient in any case.
-
Which CO2 cylinders are compatible with the JBL PROFLORA CO2 SET V?
You can use all CO2 pressurised gas cylinders offered for aquaristics in specialist shops. You have the choice between disposable pressurised gas cylinders with thread M10x1 and reusable pressurised gas cylinders with thread W 21.8 x 1/14. An adapter for reusable cylinders is already included in the set.
-
May the JBL PROFLORA CO2 products only be used for the aquarium?
Yes, the JBL PROFLORA CO2 products are designed exclusively for use in the aquarium. The gas contained promotes plant growth and works with fine precision so that even the smallest quantities can be supplied to the aquarium. Constant operation and the safety of the fish are thus guaranteed.
-
Is 1.2 bar working pressure sufficient for my CO2 system?
For a long time JBL CO2 pressure reducers had a preset working pressure of 1.5 bar. This has become established in people's minds. With the new JBL PROFLORA CO2 pressure reducers with pressure gauges, the working pressure is set to 0 bar on delivery. You admit CO2 via the large adjustment knob for the working pressure and turn it until the desired working pressure is reached. Approx. 1.2 bar is the maximum setting here. A minimum of 0.6 bar is required for the operation of all JBL non-return valves or backflow protections. This ensures that the check valve opens. A higher working pressure is not necessary, which is why all the accessories also work with the JBL PROFLORA BIO SETs. A lot of CO2 accessories available on the market give very different specifications for the working pressure. To be on the safe side, the standard of 1.5 bar which is common on the market is mentioned. As a rule, the working pressure required is the same as that on which the JBL PROFLORA CO2 accessories are based. Only a few exceptions require a working pressure of over 2 bar and are very special technical components.
-
Is a tool needed to adjust the CO2 quantity?
No, a tool should never be used. The use of a tool can lead to damage. There is a thin spike at the tip of the needle valve. If the needle valve is closed clockwise and turned too tightly or with a tool, it may break off and damage the pressure regulator._x000D_ _x000D_
-
Do you need a tool to assemble the pressure reducer?
No, a tool is not required and should not be used under any circumstances. The use of a tool can lead to damage. You can mount the pressure reducer on the CO2 cylinder with your hands. Turn only until you feel resistance and then turn about half a turn more. This way the pressure regulator fitting is hand-tight. A short hissing sound will be heard when attaching the fitting to disposable cylinders.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.