The working pressure on the pressure gauge does not change
When you adjust the working pressure, the CO2 addition needs to be running actively, otherwise the change will not be immediately visible in the event of a reduction. An increase is also visible without running CO2, but not immediately. That’s why you need to ensure that CO2 is added during the adjustment process for every reduction or increase.
Should I use several check valves on my CO2 installation?
True to the motto, better safe than sorry, some aquarists install several check valves in the same circuit. For example, if you use the JBL PROFLORA direct inline diffuser or the JBL PROFLORA CO2 Count Safe bubble counter, you already have an integrated check valve. If you also use a separate check valve (JBL PROFLORA SafeStop), there may be problems with the opening of the check valves. This effect can be observed if, after the night switch-off or interruption of the supply with the controller, the addition does not restart automatically. Please note that, depending on the working pressure and the number of bubbles, a few minutes may pass between the start of the supply and the visible entry of CO2 into the aquarium.
Each spring in a check valve needs a certain pressure to be opened. Several springs can therefore interfere with each other and, depending on the distance between the two check valves, reduce the pressure at the spring to such an extent that it remains closed. Therefore, please always use only one check valve for your CO2 installation.
The pressure reducer cannot be removed
Your system is probably still under pressure. Close the cylinder valve and remove the CO2 hose from the pressure regulator fitting. Open the regulating screw and release the pressure still present in the pressure regulator until both pressure gauges show 0 bar. Loosen the connecting nut of the pressure regulator fitting from the cylinder valve.
Do you need a tool to assemble the pressure reducer?
No, a tool is not required and should not be used under any circumstances. The use of a tool can lead to damage. You can mount the pressure reducer on the CO2 cylinder with your hands. Turn only until you feel resistance and then turn about half a turn more. This way the pressure regulator fitting is hand-tight. A short hissing sound will be heard when attaching the fitting to disposable cylinders.
JBL ProFlora m500, JBL ProFlora m2000, JBL ProFlora u500: нужно ли на что-то обращать внимание в отношении баллонов с СО₂?
Нужно обратить внимание на два пункта:
1) баллон: многоразовый баллон проходит тест, в результате которого ставится штамп на баллоне. Этот тест нужно обновлять каждые 10 лет, при этом проверяют дно баллона и уплотнение и резьбу клапана.
2) двуокись углерода: диоксид углерода вреден в зависимости от концентрации в воздухе. См. здесь: http://www-organik.chemie.uni-wuerzburg.de/misc/betr_ein/uw-g15.html : в концентрации диоксида углерода 3-5% учащается дыхание и увеличивается частота сердечных сокращений. Другие симптомы: головная боль, тошнота и звон в ушах. При концентрации диоксида углерода 8-10% и более эти симптомы усиливаются. Это может привести к судорогам, потере сознания, остановке дыхания и смерти от удушья.
Баллон 500 г содержит 500 г CO₂. Это 11,36 молей (единица измерения химических материалов). Один моль газообразного вещества при обычных условиях (273,15 К, 101325 Па) занимает объем 22,414 л, из чего выходит, что 500 г CO₂ занимают объем 254,7 л. CO₂ тяжелее воздуха и, следовательно, скапливается внизу. При площади помещения 20 м² это соответствует слою CO₂ в 12,735 мм = 1,27 см. при полном смешивании с воздухом в комнате 20 квадратных метров с высотой потолка 2,5 м (что эквивалентно 50000 л) максимальная концентрации газа составляет 0,5% объема, что гораздо ниже опасных показателей.