JBL LED SOLAR Y tipi çoklayıcı kablo

Stok durumu:
KDV dahil tavsiye edilen satış fiyatı Artı kargo bedeli
Satıcılar yakınınızdaki
Bu ürünü uzman satıcınızdan veya çevrim içi satış kanalıyla temin edebilirsiniz.
Ürün bilgileri

JBL LED SOLAR Y tipi çoklayıcı kablo

Ürün no:
EAN Kodu:
Paket hacmi:
0.670 l
Brüt ağırlık:
93.000 g
Net ağırlık:
89 g
Ağırlık faktörü:
Ebatlar (u/y/g):
30/150/150 mm
How can the LEDSOLAR NATUR and EFFECT be installed?

There are only three ways to attach the JBL LED SOLAR NATUR and EFFECT units to an aquarium and none of these involve “simply” placing the LED on it.
1. Retrofitting: using the enclosed adapters, you fit them at both ends of the LED body and put it into the old tube sockets (T5/T8).
2. Top assembly: with the enclosed brackets, the LEDs can be safely positioned on the edge of the aquarium, without any danger of them falling in or being too close to the water surface.
3. Suspension: Using the LED SOLAR Hanging accessory, you can position your LED down hanging from the ceiling so that it hovers above the aquarium.

Can I operate an LED SOLAR EFFECT unit on its own?

The operation of the LED SOLAR EFFECT on its own does not provide the lighting, which is absolutely necessary for fish and plants, in sufficient quantities. Due to the existing plug configuration, which has been selected for your safety, the LED SOLAR EFFECT must be operated together with a LED SOLAR NATUR. If you individually purchase the LED SOLAR EFFECT which is intended only as a supplement to the LED SOLAR NATUR, you will not have all the necessary accessories. This is why you only find the driver (power supply), the IR receiver and the remote control in the box of SOLAR LED NATURE. And that’s why the LED SOLAR EFFECT can only be operated in combination with the LED SOLAR NATUR.

Can I connect two LED SOLAR NATUR units to just one power supply?

Unfortunately this is not possible - you will need two power supplies. One driver (power supply) has the capacity to connect one LED SOLAR NATUR and one LED SOLAR EFFECT, which together create an efficient and ideal aquarium lighting. If you need a high power light aquarium and have a particularly large number of plants, you can easily install another LED SOLAR NATUR with another driver, which is included with each LED SOLAR NATUR kit free of charge. The power supply cannot handle the power of two LED SOLAR NATUR units. Therefore, we strongly advise against the use of a home-made adapter.

Why can you find two sets of wattage data on the packaging?

Decisive for you is the overall performance of a system. This determines the "power consumption" on your household bill. All manufacturers are obliged to state this amount on their packaging. This is the sum of the entire electrical consumption of a product. With the JBL LED SOLAR you have the LED and the driver (power supply) consuming electricity. Due to the reactive power and transformation processes every individual power supply consumes small amounts of power. For you as an aquarist the LED performance is crucial for your aquarium and the plants, which is why we do not want to deprive you of this information with the surprisingly low overall values.

Can the LED SOLAR be placed directly on a glass brace?

LEDs produce heat, which the metal heat sink on the back of the JBL LED SOLAR dissipates. In order to avoid unwanted discoloration on the protective glass, uneven illumination in the aquarium and heat problems on the LED, the LED SOLAR NATUR and EFFECT units should always be mounted at a distance of min. 1 cm to the material below (e.g. a glass brace). The brackets enclosed for installing them as a top assembly or the wire suspension mean that no direct contact is necessary. Installing a retrofit in the tube socket is likewise safe.

Daha fazla SSS göster ...
Blog - Görüşler ve deneyimler


Misunderstandings – typical beginner mistakes

Based on our own experience in customer service and the many messages and questions we receive, we have put together the typical mistakes beginners may make. The experienced aquarist might well smile, but if they are honest, these are mistakes we all made at the start, aren’t they?

Daha fazla bilgi için


Changeover To JBL LED - Conversion Table

You can see from the following table which LED light fits in your cover or can be used to replace your current T5 or T8 fluorescent tubes. In the first line you can also see the wattage each JBL LED light consumes and you can calculate the electricity savings compared to the wattage of your previous fluorescent lamp.

Daha fazla bilgi için

Güvenlik talimatları

  • Aksesuarlar için güvenlik talimatları
    Dosya adı:
    17 kByte