Filter maintenance made easy – It’s time to clean the aquarium

What do you need to clean and maintain an internal or external aquarium filter? Some water, a lint-free cloth, a sponge and... ? Definitely not soap! Even if the underwater world of the film "Shark Tale" featuring Christina Aguilera’s well-known song "Carwash" seems to suggest this, these aren’t the materials for caring for our internal filter or external filter, the engine in the aquarium.

But let's be honest. Have you ever thought about cleaning your filter? I'm not talking about getting the "dirt" out of the container and replacing or washing out the filter media. The tubes and hoses need your attention as well as the seals on the filter head and the hose connection block. And don’t forget the impeller well with the impeller, either. I’m not worried about you cleaning your filter baskets with their filter masses and the different filter media. They almost clean themselves. But how do you clean the rest properly?

I’ll guide you step by step, telling you which parts can be cleaned correctly and easily. Giving you a checklist so that you don't forget anything.

Cleaning the inner filter

The baskets and the inside of the filter container can be cleaned with a sponge (e.g. the JBL Spongi ) so that algae and bacterial films also disappear. Replace the water inside, which is full of mulm and other particles, with aquarium water.

Partially replace or clean the filter media. Don’t wash cotton wool ( JBL Symec Filter floss ) or fleece ( JBL Symec VL ) – just replace them. They are hard to wash and their structures become more dense. This would greatly reduce the function and water flow you are used to. You can knead and wash sponges and solid materials, such as clay and sintered glass, in skimmed aquarium water. Replace activated carbon and peat.

You read that right: Skim off some water from the aquarium and use it! Don’t use tap water from your shower or bathtub. Strong temperature fluctuations and greatly differing pH values can harm the bacteria inside and bring operation to a stillstand. The second factor is kneading, which helps bacteria and organic material to remain inside in small amounts and to continue ensuring a high level of biological activity. If you do want to use tap water, bear these two issues in mind to prevent problems. A strong water jet seems reasonable at first, but is usually too thorough (which is not good in this case). Older literature always recommends partial cleaning of the filter. Unfortunately, this is not possible with all filters. In the right way, you can do it all at once, as described. The subsequent addition of JBL FilterStart to the filter material and JBL PROCLEAN BAC to the water ensures the safety of the active bacteria culture even if you make some small mistakes.

Cleaning the outer filter

Use a towel, leather cloth or microfibre cloth ( JBL WishWash ) to the outside to remove water spots and blemishes. To remove limescale and adhering dirt, you can apply  JBL PROCLEAN AQUA to the outside without problems. If any of it gets into the filter, there is no danger for your aquarium inhabitants such as fish and shrimps.

Head and connection block

Don’t forget the filter head. Although it collects less dirt, plant debris and snails can get stuck here. Always check the paths your water flows in. For a long service life and water-tightness, remove any dirt from the seals with a soft cloth ( JBL WishWash ) and maintain them with JBL SILICONE SPRAY .

There are two components in the filter head that need your special attention:

1. The impeller is the heart of your filter and transports the water in the rhythm of the mains frequency. Open the impeller cover and remove the impeller with the JBL CristalProfi Pulling Aid Impell. Bearing&Brush from the well. Clean the ceramic axis / metal axis, the impeller well and the impeller using the brush supplied and check the impeller with its rotor blade for damage. This component, like a car tyre, is subject to constant wear and can be damaged by long running time. It then needs to be replaced. Repairing it can cause an imbalance and damage the impeller well. Before reinstalling the impeller, also take care of the seals with JBL SILICONE SPRAY .

2. Next, take a look at the hose connection block. It connects the inlet and outlet hoses to the aquarium. Check the waterway for inclusions, clean the inside with the flexible hose brush JBL Cleany or the brush from JBL CristalProfi Pulling Aid Impell. Bearing&Brush and maintain the visible seals with JBL SILICONE SPRAY .

Cleaning accessories and attachments

At this point, most aquarists think they' re done. But did you know that the hoses and tubes also get dirty? As a rule of thumb, the more light that comes in and reaches the tubing, the more polluted it will become. Biofilms and algae form. A common answer to this is: you can just run water through with the shower spray and it will clean itself. But you will notice that nothing changes visually. In fact, bacterial films, which in turn provide a good foothold for algae, can clog this waterway in hoses and pipes by more than 50 %. The performance is reduced and mere flushing is not enough. The contamination causes increased back pressure and can even cause a filter to "suck in" or gurgle air. With a simple tool, the JBL Cleany - an elastic hose brush, you can clear the way again. You will be amazed at the amount of dirt that is pushed out.

Other attachments that are directly exposed to light and water in the aquarium will sooner or later become algal or unsightly. You can dismantle them for cleaning and put them in JBL PROCLEAN POWER following the instructions for use. After a few minutes they will look like new. Light dirt can be easily removed with JBL Spongi , a sponge, or the JBL PROSCAPE CLEANING GLOVE , a glove.

© 28.11.2021
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

About me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.