JBL PROTEMP e501
Product features
- In-line heater integrated into the hose of the external aquarium filter, removing the need for a heater INSIDE an Aquarium
- Easy installation: cut through the hose from the external filter that feeds the water back into the aquarium, insert the external heater in between, insert the plug and set the water temperature you want
- The integration in the filter circuit ensures a very even distribution of the water temperature with an accuracy of +/- 0.5 °C and a switching interval of 1.0 °C in the aquarium
- LED display of current and desired temperature. Interchangeable, screw-on (3/4'') hose connections for 12/16, 16/22 and 19/25 mm incl. hose securing. Total length 30.5 cm
- Package contents: 1 in-line heater 500 W for aquariums from 160-600 l (100-150 cm) with hose connections for 12/16, 16/22 and 19/25 mm and cleaning brush
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
Where is the external heater installed?
Place the JBL PROTEMP e inline heater on the outlet side of the external filter as the first component, so that UV-C, CO2 diffusers, and other attachments are placed after the heater. If this is not possible, installation after the UV-C device is also possible. Only diffusers should be installed behind it.
-
What water pressure are PROTEMP e inline heaters designed for?
This device is intended exclusively for heating aquariums in private households. The inline heater is connected to an external filter or a feed pump. These systems are pressureless systems that only use the principle of circulation and do not build up pressure, as the inlet and outlet provide additional drainage and the rotor does not build up water pressure during operation. Use with accessories not recommended by the manufacturer can lead to dangerous situations and loss of warranty. Installation on pressure pumps or directly on water pipes is therefore not possible
-
Are PROTEMP e external heaters also suitable for saltwater aquariums?
The JBL PROTEMP e300 and e500 are external heaters for freshwater aquariums and are not intended for use in saltwater aquariums, as salt crusts can form on the outside of the filter tank of saltwater aquariums due to splashing water. This can damage the display and other external components.
-
Does the orientation of the external heater matter during installation?
Yes, because the temperature measurement requires continuous contact with the water. During installation, pay attention to the flow direction marked by arrows on the heater housing. Attach the heater to the suspension loop provided in as vertical a position as possible with the flow direction pointing upwards. This is the only way to ensure that the device can be vented and the temperature measurement works properly.
-
Can two adapters be combined?
No, that is not possible. You can only make one change at a time with the JBL PROFLORA adapters. u95 --> u500, disposable Dennerle --> u001 or u001 --> m001. An example: If you use the small 95 g CO2 cartridges with the JBL PROFLORA u201 pressure reducer to supply CO2 to your aquarium, you can use the adapter from the JBL PROFLORA series to connect the u201 to the u500 disposable cylinders with the existing pressure reducer. This means that the JBL PROFLORA u500 disposable CO2 cylinders can be used with the JBL PROFLORA u201 pressure regulator. The pressure regulator remains unchanged. As a result, no further "adaptation" with the JBL PROFLORA CO2 ADAPT U - M is possible. This also applies to all other combinations of adapters
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.