Use biocides safely. Always read the label and product information before use.
Registered at the Federal Institute for Occupational Safety and Health under BAUA number N-43072
Baua no. for JBL AlgoPond Green
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
Any algae control product that kills algae, such as JBL AlgoPond forte, AlgoPond green, or Algol, causes the dead algae to decompose biologically and be broken down by bacteria. This in turn leads to enormous oxygen consumption by the bacteria (nitrification) and the release of the nutrients nitrate and phosphate, which were "bound" in the algae. In principle, this feeds the next generation of algae. This is why JBL always recommends binding the released nutrients as the final step in algae control after targeted treatment with an algae product. Since it is sufficient to remove one of the two nutrients, we recommend phosphate removal, which can be done very easily with a good phosphate remover (JBL PhosEx Pond or JBL PhosEx). Incidentally, it therefore always makes sense to remove dying or dead algae mechanically. The less algae is broken down, the fewer nutrients are released again!
In simple terms, when using the liquid products JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL AlgoPond Green*, JBL PhosEx Pond Direct, and JBL BactoPond, the UV-C clarifier should be temporarily switched off so that the active ingredients are not destroyed. Please refer to the respective instructions for use for the time periods. With JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, and JBL SediEx Pond, the UV-C clarifier can remain in operation. * Labeling according to EU Directive 98/8/EC: Use biocides safely. Always read the label and product information before use!
Each JBL algae treatment has a specific purpose. It is therefore not necessary to use several AlgoPond products at the same time. Use AlgoPond Green against green water. For thread algae and all other types of algae, use AlgoPond forte. If you want to change products, wait 14 days, change at least 50% of the water and filter through activated carbon. StabiloPond and PhosEx can of course be used together with an AlgoPond algae treatment in accordance with the 1-2-3 algae-free principle.
Stelle deine Frage an das JBL Service Team.
