JBL PhosEx Pond Direct 4,95l
Item no. 2739700
Product features
- For pond water to suit both fish and plants: reliable removal of algae nutrient phosphate from the pond water
- Simple treatment: calculate the required quantity, mix with pond water in watering can, distribute evenly over the pond
- Eliminates the basic nutrients of all types of algae: significant reduction of high phosphate contents (already after 2-24 hours)
- Without any harmful side effects: harmless to fish, no release of aluminium, indicates its effectiveness through brownish water. discolouration.
- Contents: phosphate remover for ponds, PhosEx Pond Direct. Dosage: 40 ml for approx. 800 l pond water
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
After using PhosEx Pond Direct, even multiple times, the phosphate test still shows a deep blue color as the maximum value.
In this case, the phosphate value was so high that the application of PhosEx Pond Direct could not be detected by measurement because it was several times higher than the maximum dissolved value. In this case, the water sample must be diluted with distilled water or other phosphate-free water before the test in order to first determine the actual phosphate value. PhosEx Pond Filter is always a good alternative in such cases
-
I successfully got rid of the algae, but it keeps coming back. Why does it keep coming back and how can I prevent it?
The main causes of algae in garden ponds are too much light and too many nutrients. Successful algae treatment releases the nutrients bound in the algae, which are then available as nutrients for the next algae bloom during the next period of good weather with sufficient light. Measure: JBL PhosExPond Direct precipitates phosphates, removing them from the water and thus from the algae. JBL PhosExPond Filter permanently binds phosphates and limits their levels. Action: JBL PhosExPond Direct precipitates phosphates, removing them from the water and thus from the algae. JBL PhosExPond Filter permanently binds phosphates and limits their level. JBL BactoPond can be used as a support after algae treatments to minimize nitrogen compounds. JBL SediExPond promotes sludge reduction at the bottom of the pond through so-called heterotrophic (all-consuming) bacterial strains. JBL AlgoPond Sorb adds natural humic substances to the water and, thanks to its light amber color, reduces excessive light penetration into the garden pond, which means a significant reduction in algae growth
-
Can the pond care products JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, JBL SediEx Pond, JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL, AlgoPond Green*, JBL PhosEx Pond Direct, JBL BactoPond be used without any problems with a UV-C water clarifier in operation, or should the UV-C lamp be switched off?
In simple terms, when using the liquid products JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL AlgoPond Green*, JBL PhosEx Pond Direct, and JBL BactoPond, the UV-C clarifier should be temporarily switched off so that the active ingredients are not destroyed. Please refer to the respective instructions for use for the time periods. With JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, and JBL SediEx Pond, the UV-C clarifier can remain in operation. * Labeling according to EU Directive 98/8/EC: Use biocides safely. Always read the label and product information before use!
-
Can JBL PhosEx Pond Direct be used in stainless steel tanks?
JBL PhosEx Pond Direct attacks low-quality stainless steel. Since the steel used cannot be assessed without a technical data sheet, it is recommended not to use JBL PhosEx Pond Direct in stainless steel tanks.
-
How much binding capacity does 500 ml of JBL PhosExPond Direct have?
500 ml of JBL PhosExPond Direct binds up to 22,500 mg of phosphate.
-
Can I use JBL PhosEx Pond Direct immediately after dosing JBL AlgoPond forte?
JBL PhosExPond Direct should not be used immediately after treatment with JBL AlgoPond forte. Instead, wait around 3-4 days until the algae are visibly reduced and the nutrients stored in their cells are released again. Only then is phosphate precipitation with JBL PhosExPond Direct useful and effective. The same applies to combating thread algae with JBL AlgoPond Direct and the subsequent use of JBL PhosEx Pond Direct
-
How long must I wait after using JBL PhosEx Pond Direct before I can switch the UV-C clarifier back on?
There is no general answer to this question. JBL PhosEx Pond Direct binds dissolved phosphates through chemical precipitation, i.e., conversion into a form that is not (or only under certain chemical conditions) soluble in water. How long it takes before the UV-C clarifier can be put back into operation depends largely on the circulation capacity, i.e. how long it takes for the water to be completely filtered through the pond filter. Furthermore, the existing flow/water movement in the pond and the method of adding JBL PhosEx Pond Direct must be taken into account. If the product is distributed over a large area, e.g. using a (plastic) watering can, and there is good water movement, the time required is shorter than if the product is added in a concentrated form to one area of the garden pond with little water movement. In addition to distribution, the water temperature also plays a certain role, but this should only be mentioned here in passing. The shutdown time should be at least as long as it takes for the pond volume to be completely circulated twice. To be on the safe side with regard to phosphate precipitation, a period of 48 hours for switching off the UV-C system is considered sufficient.
-
Can I use several algae control products together in my pond?
Each JBL algae treatment has a specific purpose. It is therefore not necessary to use several AlgoPond products at the same time. Use AlgoPond Green against green water. For thread algae and all other types of algae, use AlgoPond forte. If you want to change products, wait 14 days, change at least 50% of the water and filter through activated carbon. StabiloPond and PhosEx can of course be used together with an AlgoPond algae treatment in accordance with the 1-2-3 algae-free principle.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.
Hazard statements
JBL PhosEx Pond Direct 4,95l - Safety information according to GHS
Signal word: Danger
Hazard symbol(s)
UFI-Code
64GQ-AV98-1704-NJKW
Hazard statement(s)
- H318: Causes serious eye damage.
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501a: Dispose of contents/container in accordance with local regulations.
Hazard-determining component(s)
- 7705-08-0: -