JBL StabiloPond KH 2,5kg
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
JBL StabiloPond in the evening and JBL Algo Pond Forte in the morning is the correct procedure. However, depending on the conditions in the pond, the active ingredient takes 2-5 days before the algae growth visibly recedes. This is not possible within a few hours. JBL AlgoPond Forte can be reapplied after 4-6 days if necessary. This is advisable in individual cases of very strong algae growth.
In simple terms, when using the liquid products JBL AlgoPond Sorb, JBL AgoPond Forte*, JBL AlgoPond Green*, JBL PhosEx Pond Direct, and JBL BactoPond, the UV-C clarifier should be temporarily switched off so that the active ingredients are not destroyed. Please refer to the respective instructions for use for the time periods. With JBL StabiloPond Basis, JBL StabiloPond KH, JBL OxyPond, JBL FilterStart Pond, JBL PhosEx Pond Filter, and JBL SediEx Pond, the UV-C clarifier can remain in operation. * Labeling according to EU Directive 98/8/EC: Use biocides safely. Always read the label and product information before use!
JBL StabiloPond Basis and JBL StabiloPond KH are salt mixtures that stabilize (increase) the total hardness and carbonate hardness. They do not contain any nutrients that are available to algae. Nevertheless, it may appear that algae grow faster after adding JBL StabiloPond. This is because in most cases pond water does not contain enough minerals for the organisms living in it. If these missing minerals are added to the water, the supply situation for all organisms, including algae, improves as long as other nutrients available to algae are present, which is always the case. Some types of algae can store up to 100,000 times their own requirements in phosphate reserves.
JBL StabiloPond KH should be dosed: In the evening before algae treatments, so that sufficient buffer capacity is available to stabilize the pH value. After heavy rainfall (summer storms), as the dilution effect caused by the rain can also reduce the carbonate hardness (keyword: acid rain). For initial use or carbonate hardness 0, dose 200 g / 1,000 l pond water. For subsequent applications, 100 g / 1,000 l pond water is sufficient. Sprinkle the powder into the pond. Do not dissolve it in water beforehand, as this will cause foaming and reduce the stabilizing effect on the pond water
Each JBL algae treatment has a specific purpose. It is therefore not necessary to use several AlgoPond products at the same time. Use AlgoPond Green against green water. For thread algae and all other types of algae, use AlgoPond forte. If you want to change products, wait 14 days, change at least 50% of the water and filter through activated carbon. StabiloPond and PhosEx can of course be used together with an AlgoPond algae treatment in accordance with the 1-2-3 algae-free principle.
Stelle deine Frage an das JBL Service Team.