Automatic water change - No drips and spills!

A lot of people flinch at the mere word "water change". Dirt, stains and puddles everywhere. Either a bucket topples over, some water spills out of the hose or the dried dirt from the last water change crumbles out. And if it's not that, the inexperienced aquarium owner sucks in the first sip of water straight away. Sounds like a horror scenario and it's really not pretty, but it's part of the game. But let's be honest, nowadays it doesn't have to be like that, it really doesn’t. With a little practice, the accidents can all be averted.

With the right equipment, such as the   JBL PROCLEAN AQUA IN-OUT COMPLETE JBL PROCLEAN AQUA EX 20-45 and JBL PROCLEAN AQUA EX 45-70 substrate cleaners, their self-priming properties make it easy to move the water into the bucket without sucking it in with your mouth. However, that is not what today's blog post is about. If you would like to learn more about mulm care and substrate cleaning, take a look at this myJBL blog post:  Here’s how you clean your aquarium substrate correctly! .

The clean water change

Today let’s talk about making the water change less messy, to save the living room carpet from getting ruined, even when you’re a bit careless. With the JBL PROCLEAN AQUA EX 45-70 , you can easily carry out a partial water change with substrate cleaning for mulm care, in aquariums from 45-70 cm. If you remove the middle section from the transparent suction device, you can even carry out a water change with an aquarium height of 20 cm. You can even reach hard-to-reach spots without sucking off the substrate thanks to its specially shaped sediment bell. The dedicated "POWER WHIRL” makes all this possible.

But what makes the JBL PROCLEAN AQUA IN-OUT COMPLETE different from a conventional device? The water is sucked directly from the aquarium and delivered to the nearest washbasin via the water jet pump. The automatic suction device is set in motion by the suction of the water jet at the tap. It is only important to turn on the water briefly for the start-up process. After that, it flows automatically. If the water has to flow "uphill", which is a physical impossibility, a slight difference in height uphill can be overcome with the running tap. It thus also works if the washbasin is higher than the aquarium. Your tap in the bathtub can also be used. Its multiple adapters make the installation child's play and it’s easy to remove again once the water change is finished. If 8 m of hose is not long enough, the set can be extended by another 8 m to a total of 16 m with JBL PROCLEAN AQUA IN-OUT EXTENSION .

You get the water for refilling by flipping the lever on the water jet pump, right there from the nearest tap, where you’ve just drained off the dirty water. You do not have to make any changes to the set up. The hoses are secured from slipping off with the enclosed  JBL ClipSafe Vario - from now on everything runs automatically. The substrate cleaner adds the fresh water to the aquarium via a soft jet.

So what’s the biggest advantage? If you need larger quantities of water to fill up, you will get tired of lugging the buckets. Backache shouldn’t be a consequence of aquarium keeping. Even if you only change 30 % of the water every 14 days, you will quickly accumulate several 100 litres of water a month that have to be moved. The  JBL PROCLEAN AQUA IN-OUT COMPLETE takes care of that completely for you. All you have to do is start it and finish it.

Regularly exchanging smaller quantities provides the necessary balance and dilution of waste products. It is better than exchanging large quantities less often.

Ultimately, it's a matter of taste. For small aquariums, lugging a bucket might be just as quick as connecting the JBL PROCLEAN AQUA IN-OUT COMPLETE . For larger quantities of water and for avoiding mess, the In-Out set offers the greater convenience.

Water treatment at the right time

Now you are surely asking yourself: how do you add the water conditioner and other important additives? Since you cannot prepare it in a bucket beforehand, add the water conditioner directly when you fill up the water so that it spreads directly and can develop its effect. If the water is not filled up within 15 minutes, you can split the dose and add it in half the time. Water conditioners such as   JBL Biotopol are thus added before and during the water change, fertilisers ( JBL PROFLORA Ferropol or  JBL PROSCAPE Fe +MICROELEMENTS ) and other care products ( JBL Denitrol JBL Acclimol or JBL Clynol ) only 15 min after the partial water change.

© 11.07.2021
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

About me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.