Have you got the right CO2 and fertiliser content in your aquarium?

CO2: permanent test or direct test?

The CO2 content of your aquarium water needs to be checked because too little CO2 is not beneficial for your plants and too much CO2 can be very dangerous for fish and invertebrates. The correct CO2 content for "normal" aquariums is between 15 and 30 mg/l.

Aquascapers go to the limit of what is possible with CO2 levels of 20-35 mg/l. There are two ways to check the CO2 content of your aquarium water. The Permanent test ( JBL PROAQUATEST CO2-pH Permanent ) shows you continuously how much CO2 is dissolved in the water by means of the colour of a small bell mounted in the aquarium. However it reacts with a time delay of several hours. If, for example, you increase the CO2 addition at 10:00 a.m., the test would not show the increased value until around 2:00 p.m. The addition of acids such as JBL pH-Minus also falsifies the display result.

The CO2 Direct test ( JBL PROAQUATEST CO2 Direct ) shows the CO2 value immediately and very accurately. Here the current CO2 content is determined with a drop test.

How can you test whether there is too little or too much fertiliser in the water?

To a certain extent, you can see if your plants are lacking fertilisers or minerals by looking at their growth and colour. Light green leaves, for example, indicate a lack of iron or potassium (chlorosis).

JBL PROAQUATEST FE Iron

If this test result is between 0.1 and 0.4 mg/l, your plants are receiving fertilisers and thus sufficient iron. With JBL PROFLORA Ferropol you can significantly increase the mineral content including iron.As iron (Fe) is only ONE important mineral for plant growth, stagnant plant growth can still occur. Then the following tests are recommended:

JBL PROAQUATEST K Potassium

Next to iron, potassium is the decisive mineral for vigorous plant growth. When there is a potassium deficiency the plants will grow very slowly and remain small. With JBL PROSCAPE K MACROELEMENTS you can increase the potassium content to 10-30 mg/l.

JBL PROAQUATEST Mg Magnesium

The metal magnesium is, next to potassium, the most important macroelement and the test result should be between 6 and 10 mg/l. In the case of Mg deficiency, the leaf veins often protrude and the areas between the leaf veins become pale. With JBL PROSCAPE Mg MACROELEMENTS the value can be raised.

JBL PROAQUATEST PO4 and NO3

In aquariums with no or very few animals, two nutrients that are usually present in excess in "normal" aquariums can actually be present in deficiency: nitrates (NO3) and phosphates (PO4). With the two tests JBL PROAQUATEST NO3 Nitrate and JBL PROAQUATEST PO4 Phosphate Sensitive you can check both values and, if necessary, re-dose with JBL PROSCAPE N MACROELEMENTS and  JBL PROSCAPE P MACROELEMENTS . This is unlikely to occur in normally stocked aquariums where the animals are also fed regularly.

© 18.12.2022
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.