JBL PROAQUATEST - simple yet laboratory standard - Part I

What if your physician didn’t use either blood tests or stethoscopes. It would be almost impossible to get a glance inside your body! Water tests enable you to take a look at the structure of your aquarium/ pond. Water can look crystal clear but can still contain poisonous substances. If problems like green water or diseases occur, water tests are an important option when determining the causes. Unfortunately, you can't tell by looking at your water what quality it is and what problematic substances it may contain. With the help of water tests, you can quickly and easily analyse any type of water (tap, well, aquarium and pond water) and use the results to understand whether and what steps you should take to optimise it.

Water testing - the most important step to understanding your aquarium

For each water analysis JBL provides water tests in the form of quick tests or colour change tests. These determine a certain value or several values in one go. These water tests help you recognise algae problems and negative nitrate, nitrite, potassium, magnesium values etc.

The quickest and easiest way to carry out water tests is with test strips. In just one minute you have the results for the most important 7 values. 

Ohne Wassertests ratest du nur herum. JBL PROAQUATEST. Hier findest du eine Übersicht.

Test strips

The strips test pH, GH, KH, NO2, NO3, chlorine and calculate the CO2 content. You dip a test strip into your aquarium water for three seconds, dab it a few times HORIZONTALLY to make sure that excess water beads off and compare it with a colour scale. With JBL PROSCAN you place the test strip on a special colour chart, which you can "photograph" with your smartphone and a free ProScan app after waiting 60 seconds. The app reads out the colours and shows you the resulting values extremely accurately, as well as a recommendation for possible optimisation of your water values.

JBL PROAQUATEST EASY 7in1 - the orientation quick test for aquarium, pond, well, spring and tap water.

JBL PROSCAN water analysis and diagnosis via smartphone. Simple and safe monitoring of freshwater water values.

Colour comparison tests

Fill two cuvettes with your aquarium water. Put one cuvette on a colour field of the colour chart to compensate for any inherent water colouring during the reading of the colour (JBL comparator system). For better handling put the cuvettes into the plastic holder which you can move back and forth on the colour chart’s colour fields. Place the second cuvette on a white field and add indicators to colour the water. Now compare the resulting colour with the colour on the colour chart and read the value.

JBL PROAQUATEST pH 3.10-10.0 - Quick test to determine the acidity in ponds and freshwater/marine aquariums. When setting up a new aquarium, you need to measure daily during the first week, then once a week.

JBL PROAQUATEST pH 6.0-7.6 - Quick test to determine the pH value in the range 6.0-7.6 in freshwater aquariums. When setting up a new aquarium, you need to measure daily during the first week, then once a week.

JBL PROAQUATEST pH 7.4-9.0 - Quick test to determine the pH values in the range 7.4-9.0 in ponds, freshwater and marine aquariums. When setting up a new aquarium, you need to measure daily during the first week, then once a week.

JBL PROAQUATEST Cu Copper - Quick test to determine the copper content in fresh and marine water aquariums & ponds. When setting up a new aquarium, you need to measure daily during the first week, later in cases of invertebrate and fish deaths and when dosing copper-bearing medications.

JBL PROAQUATEST Fe Iron - Quick test to determine the iron content in fresh and marine water aquariums & ponds. After setting up a new aquarium, you need to test once, after that weekly and whenever green algae problems arise or when plants don’t grow properly.

JBL PROAQUATEST SiO2 Silicate - Quick test to determine the silicate content in freshwater & marine aquariums. A test is needed when setting up a new aquarium, when changing the water, and when diatom problems arise.

JBL PROAQUATEST NH4 Ammonium - Quick test to determine ammonium/ammonia content in freshwater/marine aquariums & ponds. For checking the biological balance or bacterial activity. Test daily when setting up a new freshwater aquarium, test weekly when setting up a new saltwater aquarium or when fish diseases or deaths arise.

JBL PROAQUATEST NO2 Nitrite - Quick test to determine the nitrite content in freshwater/marine aquariums & ponds. Nitrite is a toxic nitrogen compound formed when the bacterial balance is disturbed or when setting up a new aquarium. The test shows the exact nitrite content of the water. For a new freshwater setup test daily for three weeks. Test weekly for a new saltwater setup and when fish diseases or deaths arise.

JBL PROAQUATEST NO3 Nitrate - Quick test to determine the nitrate content in freshwater/marine aquariums & ponds. Test weekly if you are setting up a new freshwater or marine aquarium, or if you have green algae problems.

JBL PROAQUATEST PO4 Phosphate Sensitive - Quick test to determine the phosphate content in freshwater/marine aquariums & ponds for optimal plant growth or possible causes of algae. Test weekly when setting up a new freshwater or marine aquarium, when algae problems arise, or for monitoring the tap water.

Please make sure to use the narrow end of the measuring spoon. If you do not, the test result will remain clear or appear slightly yellow even though phosphate is present. 

JBL PROAQUATEST PO4 Phosphate koi - Quick test to determine phosphate levels from 0.1 up to 10 mg/l in garden and koi ponds. Test routinely and when algae problems arise. 

JBL PROAQUATEST Mg Magnesium Fresh water - Quick test to determine the magnesium content in freshwater aquariums. For fertilisation control for perfect aquarium plant growth. Magnesium deficiency leads to stagnant growth and light leaf colour in aquatic plants.

We hope you were able to get a good overview in Part I. In Part II we will show you the other water test types, such as the turbidity test, permanent test and colour change test.  

If you want to know more about this topic, then take a look at our Themeworlds Aquarium and Pond: Water tests or The water tests – all parameters .

Tell us in the comments which JBL water tests you use!

© 22.01.2023

More about this topic for you

JBL PROAQUATEST - simple yet laboratory standard - Part II

Today we’re continuing on the topic of water tests, with Part II of the blog post from 22.01.2023. Enjoy reading.

Read more
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.