Springtime is algae time

The total phosphorus entering water bodies per year in Germany is approx. 23,000 t (data from 2005, source: Federal Environmental Agency). Broken down to a single square metre of water surface, this corresponds to 2683 mg / m² of phosphorus, which corresponds to 8229 mg of phosphate per m². In a pond with a depth of 2m and a rectangular shape, this would result in phosphate pollution amounting to 4.1 mg/l per year. The sources of phosphorus pollution are the following according to the Federal Environmental Agency (in descending order): Point sources (e.g. controlled fertilization), urban areas (carried in dust particles), groundwater, erosion, surface water, entry through the atmosphere and drainage. Even if all of the sources do not apply to garden ponds and even if not all phosphates are available to algae, it is a fact that phosphorus (phosphate) from the surroundings is constantly entering our garden pond water.

hosphates are the primary nutrients for algae growth in a garden pond. Phosphate levels of 0.35 mg/l (lower limit of the definition of eutrophic = nutrient-rich bodies of water) already suffice to trigger significant algae growth. Many algae species are able to store enormous amounts of phosphates in their cells (e.g. Volvox algae can store 140,000 times the water concentration and Nitzschia algae can store up to 3,800,000 times the concentration which can be measured in the water). As a result, tiny amounts of phosphates are enough for these algae to grow permanently. The storage capacity also explains the phenomenon of algae growing in a pond without any measurable phosphate. As a consequence: If there are algae present, then phosphates are also present, regardless of whether they can be measured in the water or whether they are bound in the biomass of plants, algae and animals or are in the sediment.

Under these circumstances, it is very clear that the permanent export of phosphates out of the medium, namely the pond water, is the only way to keep algae levels low in a garden pond in the long term. The most effective way to do this is to use JBL PhosEX Pond Filter . By regularly replacing the granules, phosphate is removed from the pond permanently, i.e. exported. The use of phosphate binders which are added to the pond water only provides a short-term means for rapidly decreasing the phosphate level. Export is the only viable long-term solution. In nature, nutrients are also exported from the pond in the form of animals which develop as forms of larvae in the water and then change over to a terrestrial life (e.g. amphibians) and aerial life (e.g. insects). Figuratively speaking, every small common toad which has completed metamorphosis from a tadpole to a toad and then migrated carries two small bucketfuls of phosphate on land. Nevertheless, the overall balance of nutrients entering the bodies of water always remains positive with the following result: The pond fills in!

Every natural lake with no outlet will fill in in the course of time. This may take centuries to several thousand years, depending on the size, volume of water and pollution. The process cannot be avoided because nutrients from the surroundings are constantly entering the water. However, we don’t want our garden pond to fill in, so that it is advisable to regularly use JBL SediEx Pond . The bacteria contained in this two-component system effectively contribute to reducing pond sludge.

© 17.04.2015 JBL GmbH & Co. KG

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.