JBL PROTEMP CoolControl
Item no. 6043900
Product features
- Automatické zapínání chladicího ventilátoru při překročení nastavené teploty mezi 18 a 36 °C (pro všechny JBL Cooler)
- Snadná montáž: CoolControl s chladičem spojte spojovacím kabelem. Síťový kabel chladiče JBL Cooler zastrčte do jednotky CoolControl. Zvolte teplotu a zapněte
- Regulace teploty 18-36°C, kontrolka funkce, teplotní čidlo na měření teploty vody, zástrčka DC 5/2 cm
- Spínač: automatický, manuální režim nebo off, kontrolka funkce, provozní napětí 12 V DC přes síťový zdroj chladicího ventilátoru
- Obsah: Termostat teplotním čidlem a spojovacím kabelem 132 cm pro JBL Cooler, přísavka pro teplotní čidlo (90 cm kabel) a oboustranná lepicí páska k upevnění
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
The cooler does not cool down the aquarium
JBL ProTemp Coolers cool the water temperature by 2-4 °C in high ambient temperatures. To achieve this with this product, it’s important the maximum recommended aquarium volume is adhered to. Please note that the cooling effect only occurs when the cooler is in operation and that the system needs to have been running continuously for a few hours beforehand. The air flow needs to be directed across the entire width of the aquarium and be at a 45° angle to the water surface. If only a part of the water surface is ventilated or the angle is set to 90°, the desired effect will be lost or greatly reduced. The housing can be rotated 360°.
-
Can I operate two coolers with one ProTemp CoolControl?
The ProTemp CoolControl is connected between the power supply and the ProTemp Cooler. It is therefore not possible to connect two coolers to one controller. Each Cooler needs its own controller.
-
Why don’t the CO2 bubbles dissolve after reinstallation / cleaning?
After reinstallation the bubbles move only haltingly through the diffuser and sometimes merge into large bubbles. The device needs approx. 48 hours to set up! After that a bio-film will have formed on the surface of the device, allowing the bubbles to rise freely upwards. After the running in time the required bubble count will adapt itself for your aquarium.
-
Does my CoolControl work with every aquarium aerator/cooler?
The JBL PROTEMP CoolControl was designed for use with the JBL PROTEMP Cooler, and they work together perfectly. Due to different voltages, flawless function cannot be guaranteed for use with appliances from other manufacturers. Even the connecting plug, which looks identical at first glance, may be a different strength. As a result, a cooler from a different manufacturer may cause unwanted switching, leading to noises in the relay.
-
Can the new ProTemp CoolControl also regulate the old Cooler 100-300?
Yes, the new ProTemp CoolControl can also control the aquarium coolers of the previous Cooler 100-300 range.
-
Why doesn’t the thermometer stick to the pane?
Please clean the pane thoroughly before you install the thermometer. Algae, biofilms and lime can prevent it from sticking. If the thermometer still doesn’t hold, there may be a problem with the suction cup. Due to a material defect some suction cups have bubble-like excrescences which prevent a correct hold. If you own such a suction cup, please contact our customer service, and provide a photo.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.