JBL AquaSil 310 ml černá
Item no. 6139300
Poslední šance – končí v sortimentu
Shop locator
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
In fact, silicone will not set properly on silicone, because bridging bonds cannot be formed on set silicone. Therefore, if you wish to reseal a seam, it is advisable to apply a broader layer of the Aquasil to the old silicone seam, so that the contact surface with the glass is large enough.
When gluing the full surface of decor materials with AquaSil Silikon, hardening takes much longer, as the outer contact surface is much smaller in relation to the surrounding area compared to a stretched silicone seam. As you have noted correctly, the vinegar odour is an indication that the silicone is not yet fully hardened.
As long as the BDB has not expired, the bond will hold up. Cleaning the surface before application, e.g. with acetonene, is helpful in these cases.
The released acetic acid reacts with water to create acetates, which do not harm the animals. As an organic source in the water these acetates are then broken down by bacteria, which can lead to slight bacterial algae blooms and as result to a reduction of the oxygen content. However the decisive factor here is the ratio of emitted acetates to water volume. I would be careful about using a NanoCube at the beginning. It is possible to prevent this effect in carrying out a daily water change of 50 % for about one week. This will bring about a sufficient dilution.
We recommend you use it at room temperature. The temperature range for a possible application is between +5 °C and +40 °C. It cannot be used under +5 °C.
Stelle deine Frage an das JBL Service Team.