JBL CRISTALPROFI i60 greenline
Product features
- Čistá a zdravá voda v akváriích: Vnitřní filtr pro mechanickou a biologickou filtraci - pro akvária 40 - 80 litrů (50-60 cm)
- Kompletně připraveno k připojení a vybaveno filtračními rohožemi: Připojení širokoproudé trysky nebo trubky trysky k filtru, umístění filtru v akváriu, přípojka síťové zástrčky
- Modulární design: Libovolně rozšířitelné, trubka výstupu vody otočná o 90°, velký objem filtru, přísavka s mechanismem k uvolnění, vyprázdnění filtru: Odpadní voda se nedostane do akvária, možné použití všech filtračních hmot, elegantní hranatý tvar
- TÜV schválení, plně ponořitelný, vysoce energeticky úsporný: Spotřeba energie 4 W, 63 % úspora, technologie motoru. Bezúdržbové čerpadlo: Permanentní cirkulace, regulovatelný výkon 150 - 420 l/h
- Balení obsahuje: vnitřní filtr do akvárií, CristalProfi i 60 greenline, rozměry (d/v/š): 8,5 x 8,5 x 15,5 cm. Záruka 2 (+2 roky při registraci produktu)
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
Does the filter restart on its own after a power shut off?
The filter (CristalProfi) starts up again on its own after a power shut off, but only if there is water in the filter circuit.
-
How do I attach the suction cup to the CristalProfi greenline internal filter?
Press the enclosed large suction cups with a turning movement and gentle pressure into the side openings of the pump head. Make sure that the central pin reaches into the hole in the suction cup and reappears when it is attached. The correct installation is indicated in the following figure.
-
My filter has become loud after a few months. What’s the reason for that?
The impeller of the filter is subject to constant wear and tear. We recommend you replace it. This way its smooth running is ensured. Make sure that the noises are not caused by trapped air. The guarantee covers defects in material and assembly. The guarantee does not cover parts subject to wear and tear, such as the impellers or shafts as well as damage caused by external influences and improper handling.
-
Should I use several check valves on my CO2 installation?
True to the motto, better safe than sorry, some aquarists install several check valves in the same circuit. For example, if you use the JBL PROFLORA direct inline diffuser or the JBL PROFLORA CO2 Count Safe bubble counter, you already have an integrated check valve. If you also use a separate check valve (JBL PROFLORA SafeStop), there may be problems with the opening of the check valves. This effect can be observed if, after the night switch-off or interruption of the supply with the controller, the addition does not restart automatically. Please note that, depending on the working pressure and the number of bubbles, a few minutes may pass between the start of the supply and the visible entry of CO2 into the aquarium. Each spring in a check valve needs a certain pressure to be opened. Several springs can therefore interfere with each other and, depending on the distance between the two check valves, reduce the pressure at the spring to such an extent that it remains closed. Therefore, please always use only one check valve for your CO2 installation.
-
Wear on the impeller - When should I replace it?
There is no general answer to this question. As with a car tyre, the duration and intensity of use is decisive. Many customers use the impellers for several years without any noticeable change. Heavy use of the impeller results in a shorter service life. With a car, you know the wear and tear caused by heavy braking, mechanical damage and many kilometres driven. The following factors apply to an impeller: 1. Running time in hours 2. Throttling of the flow rate (max. 50 %) and thus lower cooling capacity 3. Dry running during water change (see 2.) 4. Mechanical damage (e.g. by snails, improper installation after removal, ...) 5. Heavy soiling As it is a wearing part, the impeller is not covered by the warranty. For a long service life, you need to clean it regularly. This will prevent increased running noises. The impeller housing, the impeller and the shaft can be cleaned with a suitable cleaning brush. If it is necessary to replace the impeller due to wear, always replace the complete set, impeller with shaft and 2 rubber bearings. This is the only way to ensure proper functioning and smooth running. When removing the impeller and shaft, a rubber bearing often gets stuck at the bottom of the impeller housing and is very difficult to remove. JBL has developed its own special tool for this purpose, which is available from pet shops under the name "Pulling aid for impeller bearing". A useful cleaning brush for the impeller housing is also included in the tool.
-
Why is the suction cup on my internal filter red-brown or light grey?
For the CristalProfi greenline internal filters, "red-brown" and "light grey" suction cups were used for a time. They are fully functional and differ only in their colour. In the spare parts shop you will find the black suction cups which were unavailable for a while, should you not like the colour.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.