JBL Artemio 1, rozšíření
Item no. 6106100
Product features
- Domácí produkce larev korýšů Artemia během 24-48 hodin: Inkubační nádrž bez vzduchového čerpadla a hadice.
- Složte inkubační nádrž a v případě potřeby upevněte na další stojan pomocí bajonetu. Natáhněte přívod vzduchu od jedné k druhé inkubační nádrži
- Další přívod vzduchu pro časově odlišně provozované další inkubační nádrže: Neustálý přísun krmiva pro mladé citlivé ryby
- Pevná instalace: Stojan k připojení další inkubační nádoby: Možná i instalace na stěnu.
- Balení obsahuje: 1 inkubační nádrž pro rozšíření sady Artemio, vč. trychtýřovité nádoby s víkem, stojan se šrouby
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
What grain size does JBL Manado have?
The grain size is 0.5-2 mm.
-
JBL ArtemioSet, JBL Artemio 3: Why doesn't the water from the breeding reactor flow through the fine sieve?
At the beginning, you may actually find that the water from the breeding reactor is not flowing through the fine sieve. This can happen when - a fresh, dry sieve is used for the first time, - a used sieve that has not been rinsed properly is used, - a sieve that is dried out is used. Possible remedies: 1) Moisten the sieve on both sides beforehand to remove the air from the pores so that the water can flow through freely. 2) Tap on the underside of the sieve. This contact causes the water to be drawn through the sieve and the effect to spread across the surface of the sieve. This is due to the sieve's fine structure with a mesh size of 150 µm and the so-called cohesion of the water molecules. Water molecules combine to form larger units (clusters), which is why water is liquid between 0 °C and 100 °C. Otherwise, it would be gaseous. When you have a fine, dry sieve, the cohesion prevents the water from passing through initially, because the pores are still filled with air. By contrast, when you have a moist sieve or have established contact on the underside, a suction effect occurs which breaks up the clusters, thereby permitting water to flow through the sieve.
-
How can I remove the hose from the device?
At first the air hoses and special CO2 hoses can easily be pushed on the connection piece. The hoses harden more and more as the months go on and can only be removed from the connection piece using great force. If you pull the hose hard it will only strain the connection, which could, in the worst case, even break off. Instead cut the hoses you want to remove laterally at the ends and carefully remove them. For this it’s always advisable to install hoses with some reserve in its hose length.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.