JBL PROFLORA CO2 TAIFUN INLINE 19/25
Item no. 6468900
Product features
- Velmi efektivní obohacení CO2 pro perfektní růst rostlin v akváriu zabudováním do zpětné filtrační hadice
- Hadici zpětného vedení vody z vnějšího filtru rozpojte, namočte membránu difuzéru, zabudujte INLINE DIFUZÉR, připojte hadici na CO2, nastavte počet bublin
- Zabudováno počitadlo bublin ke kontrole množství CO2. Pojistka proti zpětnému toku vody na ochranu techniky je rovněž součástí
- 20 % úspora CO2 díky velmi účinné membráně
- Obsah dodávky: 1 vysoce výkonný přímý difuzér CO2 připravený k připojení, nástěnný držák, upevnění pomocí přísavky a šroubení
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
The check valve doesn’t seem to let CO2 pass through it. What can I do?
Please wait until sufficient pressure has built up in the CO2 hose. Alternatively you can sharply increase the CO2 supply for a short time.
-
The bubble counter doesn’t fill with water. What can I do?
If there is no water in the bubble counter after the installation, just wait a few hours before switching on the CO2 supply. The water jet of the filter will then cause water to enter it. Alternatively while installing it, you can fill the chambers of the bubble counter with water.
-
Why do you need to soak the membrane in water for 24 hours?
To receive a consistent bubble pattern with fine micro bubbles, the modern ceramic PE hybrid membrane needs to be soaked in water before putting it into operation. If this is not done, large bubbles will occur.
-
Should I use several check valves on my CO2 installation?
True to the motto, better safe than sorry, some aquarists install several check valves in the same circuit. For example, if you use the JBL PROFLORA direct inline diffuser or the JBL PROFLORA CO2 Count Safe bubble counter, you already have an integrated check valve. If you also use a separate check valve (JBL PROFLORA SafeStop), there may be problems with the opening of the check valves. This effect can be observed if, after the night switch-off or interruption of the supply with the controller, the addition does not restart automatically. Please note that, depending on the working pressure and the number of bubbles, a few minutes may pass between the start of the supply and the visible entry of CO2 into the aquarium. Each spring in a check valve needs a certain pressure to be opened. Several springs can therefore interfere with each other and, depending on the distance between the two check valves, reduce the pressure at the spring to such an extent that it remains closed. Therefore, please always use only one check valve for your CO2 installation.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.