JBL PROFLORA CO2 TAIFUN COUNT SAFE
Item no. 6468000
Product features
- Počitadlo bublin zviditelňuje neviditelný plyn CO2 a dokáže ho počítat. Pojistka proti zpětnému toku zabrání zpětnému toku vody
- Počitadlo bublin naplňte vodou, připojte hadicí k CO2 zařízení a reaktoru, upevněte vně akvária 2 přísavkami na sklo nebo 2 šrouby na nábytek
- Počitadlo bublin umožňuje kontrolu přívodu CO2: Je-li ve vodě příliš málo CO2, lze kontrolovaně zvýšit počet bublin
- Bezpečnost: Hadicové šroubení brání nechtěnému uvolnění hadic
- Balení obsahuje: počitadlo bublin CO2 se zabudovaným zpětným ventilem; držák s 2 přísavkami/šrouby; rozměry: 105/175/40 mm
Noch offene Fragen?
In unserem FAQ‑Bereich findet ihr Antworten auf die am häufigsten gestellten Fragen. Solltet ihr hier nicht fündig werden, zögert bitte nicht, uns direkt zu kontaktieren – wir helfen euch gerne weiter.
-
Is my SafeStop damaged if I can’t blow through it?
The retaining spring in the check valve fits very tightly and ensures that no water can return. Therefore the air pressure of a diaphragm pump or our breath is not strong enough to open the spring. The valve can be opened by the pressure of the ProFlora bioCO2 systems and also the m and u series. Check valves used in air systems have a smaller counter-pressure and are also part of the JBL range.
-
Should I use several check valves on my CO2 installation?
True to the motto, better safe than sorry, some aquarists install several check valves in the same circuit. For example, if you use the JBL PROFLORA direct inline diffuser or the JBL PROFLORA CO2 Count Safe bubble counter, you already have an integrated check valve. If you also use a separate check valve (JBL PROFLORA SafeStop), there may be problems with the opening of the check valves. This effect can be observed if, after the night switch-off or interruption of the supply with the controller, the addition does not restart automatically. Please note that, depending on the working pressure and the number of bubbles, a few minutes may pass between the start of the supply and the visible entry of CO2 into the aquarium. Each spring in a check valve needs a certain pressure to be opened. Several springs can therefore interfere with each other and, depending on the distance between the two check valves, reduce the pressure at the spring to such an extent that it remains closed. Therefore, please always use only one check valve for your CO2 installation.
-
How much water should there be in the bubble counter of the inline diffuser?
The bubble counter of the JBL PROFLORA® Direct diffuser is filled with water and screwed to the body © as shown in figure B of the instructions for use. During operation, water level fluctuations may occur in the bubble counter, depending on the amount of CO2 added. A large number of bubbles with high working pressure can displace the water from the chamber. Once the addition stops, water will enter the chamber again with a time delay. If the membrane is dirty, the chamber will remain empty. Cleaning the membrane is necessary, as described in the other FAQs.
-
May the JBL PROFLORA CO2 products only be used for the aquarium?
Yes, the JBL PROFLORA CO2 products are designed exclusively for use in the aquarium. The gas contained promotes plant growth and works with fine precision so that even the smallest quantities can be supplied to the aquarium. Constant operation and the safety of the fish are thus guaranteed.
Antwort nicht gefunden?
Stelle deine Frage an das JBL Service Team.