The JBL Interns - JBL Aqua-Myths #4

Hi guys, It's been a while since the last episode of our myth-busting series. So it's high time to start the day with a new episode of JBL Aqua-Myths! Today we are looking at the following three myths from the world of aquaristics:  

1. Your plants are wilting - so throw them away?

There are many reasons for plants wilting or not growing well. However, I would not immediately throw in the towel and get rid of the plants. There is a law that helps us deal with it - Liebig's law of the minimum. Certain factors are responsible for vigorous plant growth. If one of these factors is missing, deficiency symptoms can occur - in other words, the plant may grow without being healthy, or it may stop growing altogether. These factors include light, carbon dioxide, nitrate, phosphate, potassium and others. Liebig compared plants to a wooden barrel consisting of several panels or staves. Each stave represents a factor. If all the factors are present in sufficient quantities the plant will grow well. As soon as one factor, i.e. one stave stops fitting, the barrel will leak and the plant can no longer grow well. Accordingly, the growth of the plant is limited by the lowest stave.

You can find out more about fertilisation and Liebig's law of the minimum here:

Fertilization is not just fertilization Part 1

There’s more to fertilization than you’d think Part 2

JBL TV #3: How do I get my plants to grow well in the aquarium?

If aquatic plants are withering despite all the important resources being sufficiently available, it could be because the plants were grown above the water surface in greenhouses. Once they are planted in the aquarium, they first shed their old leaves and then grow new ones - this time under water.

The plants you bought in the pet shop may also have been kept under fluorescent tubes, so if you have an LED installed in your aquarium, dim it first to get the plants used to the stronger light. In other words, the plants just need to acclimatise.

2. Do only red plants need CO2?

Every plant needs CO2. Without it, growth is not possible. One species needs more, the other less. Without an active addition, 4-8 mg/l CO2 are naturally dissolved in the aquarium water. Furthermore, all important micro- and macronutrients (e.g. using  JBL PROFLORA Ferropol ) and lighting with full spectrum and a PAR value of over 200 (e.g.   JBL LED SOLAR NATUR ) should be present. Red plants tend to be among the more demanding ones. They need a lot of light, a lot of fertiliser and they definitely need CO2 fertilisation (e.g. using JBL PROFLORA CO2 BASIC SET M ) . Dark green plants, on the other hand, are usually among the less demanding ones. They get by with little light and little fertiliser.

You can find out more about plants and CO2 here:  Plant species & CO2 plant fertilisation

3. Filter cleaning: The more thorough - the better?

This myth mostly comes up with beginners in aquaristics. For example, when something in our home is dirty, we clean it thoroughly until it is squeaky clean. You might think that it's the same with our filters in the aquarium. If it is very dirty, we clean it until it looks like new.

However, this is a great danger for the living organisms in your aquarium. Bacteria are constantly formed developing during the run-in phase, and they settle in our filter in particular. They ensure that pollutants are broken down and the biological balance is maintained. If you now clean the filter thoroughly, you’ll be killing all the important bacteria at the same time and the aquarium practically has to run in again from scratch. As a result, the nitrogen cycle in our aquarium will be disturbed and the nitrogen compounds, ammonia and nitrite, which are life-threatening for our fish, can no longer be sufficiently broken down.

You can find everything about bacteria in the aquarium here:  Bacterial initial phase

However, this does not mean that you never have to clean your filter. In general, a rough cleaning of the filter should take place every three months - i.e. lightly squeeze out the filter materials and remove the coarse dirt. This keeps a good base of bacteria in the filter. However, if you notice that the performance of the filter is declining earlier, you should of course also clean it. After cleaning, we recommend you re-inoculate the filter with bacteria. Suitable for this purpose:  JBL FilterStart & JBL Denitrol

You can read more about filter cleaning here:  Cleaning

As always, you are welcome to write us more myths about aquaristics in the comments and we will go into them in more detail, as we have done the last few times elsewhere in our mini series!

© 18.02.2022

More about this topic for you

TITEL FEHLT

Hi guys, During my work at JBL I have been confronted time and again in various forums, posts or social media with theories in aquaristics which are often considered to be correct - but in reality do not correspond to the truth at all. For this reason we thought we’d start a short series called: JBL Aqua-Myths.
Read more

The JBL Interns - JBL Aqua-Myths #2

Hi guys, It's time for a new episode of JBL Aqua-Myths! We launched this series recently in order to clear up some of the myths in aquaristics and to put some fairy tales to bed once and for all.
Read more

The JBL Interns - JBL Aqua-Myths #3

Hi guys, Here comes a new episode of JBL Aqua Myths. This time we’re looking at the following 3 myths...
Read more
Moritz Schrobenhauser
Moritz Schrobenhauser

Online Marketing, E-Commerce

About me: Tauchen, Aquaristik, Handball

Comments

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.