Have you got the right CO2 and fertiliser content in your aquarium?

CO2: permanent test or direct test?

The CO2 content of your aquarium water needs to be checked because too little CO2 is not beneficial for your plants and too much CO2 can be very dangerous for fish and invertebrates. The correct CO2 content for "normal" aquariums is between 15 and 30 mg/l.

Aquascapers go to the limit of what is possible with CO2 levels of 20-35 mg/l. There are two ways to check the CO2 content of your aquarium water. The Permanent test ( JBL PROAQUATEST CO2-pH Permanent ) shows you continuously how much CO2 is dissolved in the water by means of the colour of a small bell mounted in the aquarium. However it reacts with a time delay of several hours. If, for example, you increase the CO2 addition at 10:00 a.m., the test would not show the increased value until around 2:00 p.m. The addition of acids such as JBL pH-Minus also falsifies the display result.

The CO2 Direct test ( JBL PROAQUATEST CO2 Direct ) shows the CO2 value immediately and very accurately. Here the current CO2 content is determined with a drop test.

How can you test whether there is too little or too much fertiliser in the water?

To a certain extent, you can see if your plants are lacking fertilisers or minerals by looking at their growth and colour. Light green leaves, for example, indicate a lack of iron or potassium (chlorosis).

JBL PROAQUATEST FE Iron

If this test result is between 0.1 and 0.4 mg/l, your plants are receiving fertilisers and thus sufficient iron. With JBL PROFLORA Ferropol you can significantly increase the mineral content including iron.As iron (Fe) is only ONE important mineral for plant growth, stagnant plant growth can still occur. Then the following tests are recommended:

JBL PROAQUATEST K Potassium

Next to iron, potassium is the decisive mineral for vigorous plant growth. When there is a potassium deficiency the plants will grow very slowly and remain small. With JBL PROSCAPE K MACROELEMENTS you can increase the potassium content to 10-30 mg/l.

JBL PROAQUATEST Mg Magnesium

The metal magnesium is, next to potassium, the most important macroelement and the test result should be between 6 and 10 mg/l. In the case of Mg deficiency, the leaf veins often protrude and the areas between the leaf veins become pale. With JBL PROSCAPE Mg MACROELEMENTS the value can be raised.

JBL PROAQUATEST PO4 and NO3

In aquariums with no or very few animals, two nutrients that are usually present in excess in "normal" aquariums can actually be present in deficiency: nitrates (NO3) and phosphates (PO4). With the two tests JBL PROAQUATEST NO3 nitrato y JBL PROAQUATEST PO4 Phosphat Sensitive you can check both values and, if necessary, re-dose with JBL PROSCAPE N MACROELEMENTS and  JBL PROSCAPE P MACROELEMENTS . This is unlikely to occur in normally stocked aquariums where the animals are also fed regularly.

© 18.12.2022
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Comentarios

Hinweise und Einwilligung zu Cookies & Drittinhalten

Wir verwenden technisch notwendige Cookies/Tools um diesen Dienst anzubieten, zu betreiben und abzusichern. Des Weiteren verwenden wir mit Deiner ausdrücklichen Einwilligung Cookies/Tools zum Marketing, Tracking, Erstellen personalisierter Inhalte auf Drittseiten sowie zur Darstellung von Drittinhalten auf unserer Webseite. Eine von Dir erteilte Einwilligung, kannst Du jederzeit mit Wirkung für die Zukunft über den Menüpunkt „Cookie-Einstellungen“ widerrufen.
Mit dem Klick auf „Alle erlauben“ erteilst Du uns die ausdrückliche Einwilligung zur Verwendung von Cookies/Tools um die Qualität und Performance unseres Dienstes zu verbessern, zur funktionalen und personalisierten Leistungsoptimierung, die Effektivität unserer Anzeigen oder Kampagnen zu messen, für personalisierte Inhalte zu Marketingzwecken, auch außerhalb unserer Webseite. Dies ermöglicht uns personalisierte Online-Anzeigen und erweiterte Analysemöglichkeiten über Dein Nutzerverhalten. Dies beinhaltet auch den Zugriff und die Speicherung von Daten auf Deinem Gerät. Deine Einwilligung kannst Du jederzeit mit Wirkung für die Zukunft über den Menüpunkt „Cookie-Einstellungen“ widerrufen.
Über die Schaltfläche „Einstellungen ändern“ kannst Du individuelle Einwilligungen zu den Cookies/Tools erteilen, widerrufen und erhältst weitergehende Informationen zu den von uns eingesetzten Cookies/Tools, deren Zwecke und Laufzeiten.
Mit dem Klick auf „Nur unbedingt erforderlich“ werden nur technisch notwendige Cookies/Tools eingesetzt.

En nuestra política de privacidad obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos.

Elija su configuración de cookies

Notificaciones PUSH (emergentes) de JBL

¿Qué son las notificaciones PUSH? Como parte del estándar W3C, las notificaciones de escritorio definen una API para las notificaciones destinadas a los usuarios finales, que serán enviadas por medio de notificaciones al navegador del equipo de sobremesa y/o dispositivo móvil del usuario. Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos). Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos).

Estas notificaciones permiten al propietario de una página web ponerse en contacto con sus usuarios siempre que estos tengan un navegador abierto, independientemente de si el usuario está visitando la página web en ese momento o no.

Para poder enviar notificaciones de escritorio solo se necesita una página web con un código web push instalado. Así, las marcas que no tengan app también pueden beneficiarse de las muchas ventajas que ofrecen las notificaciones emergentes (también denominadas push, comunicaciones personalizadas en tiempo real justo en el momento adecuado).

Las notificaciones de escritorio son parte del estándar W3C y definen una API para las notificaciones destinadas a los usuarios finales. Una notificación permite notificar al usuario sobre un suceso como, p. ej., un artículo nuevo en un blog, fuera del contexto de una página web.

JBL GmbH & Co. KG ofrece este servicio de forma gratuita, el cual puede activarse tan fácilmente como se puede desactivar.