Keeping an eye on the most important water values

Professional water analysis – this sounds punishingly expensive. It makes you think of a laboratory which sends you back a record sheet with results which you don’t know how to use, as with your blood values. But the professional water testing in your aquarium or pond at home also works on a high level and above all it is simple and inexpensive. Also on the Spedizioni esplorative JBL Test dell’acqua are used and have reliably delivered the water values of many biotopes on earth.

In each test case and each individual test you will find references in the instructions and the water analysis sheet to the correct value ranges of the parameters for their intended purpose. In addition you receive recommendations for action which will lead to solutions, if the measured values are outside the recommended range. We distinguish here between the conventional community aquarium with fish; a plant aquarium (also called scape) with no or only a few fish; a marine aquarium; and a garden pond.

Base measurements –carry out always

In the aquarium there are four parameters which you should regularly monitor. In addition you should note the date and time of each measurement. Only then can later changes be recognised and in case of problems can appropriate measures be taken.

The following table shows you the 4 most important parameters with the ideal target values in the respective water type:

freshwater with fish freshwater without / few fish (ProScape) Laghetto Acqua marina Marine reef
date / time:
temperature (°C) 21 - 28 23 - 26 4 - 30 24 - 28 24 - 26
KH carbonate hardness (°dKH) 5 - 16 4 - 10 5 - 20 7 - 10 7 - 13
pH acidity 6.8 - 8.2 6.4 - 7.2 7.5 - 8.5 7.8 - 8.4 7.8 - 8.4
GH general hardness (°dGH) 8 - 25 6 - 15 8 - 30 - - - - - -

Fish mortality – common causes

If several fish die all at once it cannot be assumed that it is a normal death. If there are no noticeable symptoms of disease bad water values are often the cause. In that case the base measurements need to be carried out and to be completed with four further parameters:

freshwater with fish freshwater without / few fish (ProScape) Laghetto Acqua marina Marine reef
NH4 ammonium (mg/l) 0,1 0.1 < 0,1 0,05 0,05
NO2 nitrite (mg/l) 0.1 0,1 0.1 0.1 0.05
Cu copper (mg/l) 0.05 0.05 0.05 0.05 0.05
O2 oxygen (mg/l) 6 - 10 6 - 10 6 - 13 6 - 10 6 - 10

Problems with algae or plant growth

Everyone has experienced this at some time or another. The plants don’t grow as expected or the aquarium has an algae problem. Assuming the plants have been given the necessary technical environment (light and CO2), these two symptoms are a result of the water values. In the following posts we have already reported in detail about plant growth and the most important step to perfect growth:

1. Fertilization is not just fertilization Part 1

2. There’s more to fertilization than you’d think Part 2

3. Why is carbon dioxide (CO2) the most important plant nutrient in the aquarium?

4. Water values for water plants in detail

If plants don’t grow well algae problems are not far away. Below we have compiled eight measurable factors with target values to help you find the root cause of the problem. An imbalance of these values leads to the problems described. If you manage to return the values into the right range improvements will usually show after 2-3 weeks without having used an anti-algae agent. We only advise the supporting use of an anti-algae agent when the algae is so bad that the plants have no other means of recovery. But the water values still need to be brought within the normal range to achieve long-term success.

freshwater with fish freshwater without / few fish (ProScape) Laghetto Acqua marina Marine reef
conductivity 300 - 900 μS/cm 250 - 600 μS/cm 300 - 1200 μS/cm 49 - 52 mS/cm 48 - 52 mS/cm
NO3 nitrate (mg/l) 1 - 30 5 - 20 5 0 - 10 5
PO4 phosphate (mg/l) 0.4 0.5 - 1.8 0.1 0.02 - 0.1 0,02 - 0,1
SiO2 silicate (mg/l) 1.2 0.4 - - - 0.4 0,4
Fe iron (mg/l) 0.05 - 0.4 0.1 - 0.6 0.2 0.05 0,05
K potassium (mg/l) 10 - 30 10 - 30 - - - 380 - 400 380 - 420
Mg magnesium (mg/l) 5 - 10 5 - 10 - - - - - - - - -
CO2 carbon dioxide (mg/l) 15 - 30 20 - 35 - - - - - - - - -

Seawater special – coral growth and health

The classifications above also apply in the marine aquarium. The base measurements are reduced by the general hardness (GH) parameter. Three parameters have been added and as they are new water values they need to be checked during each test run,

Acqua marina Marine reef
Ca calcium (mg/l) 400 - 440 420 - 480
Mg magnesium (mg/l) 1200 - 1350 1350 - 1400
Density (25°C kg/l) 1.022 - 1.026 1.022 - 1.026
Salinity (ppt) 30 - 35 30 - 35

CO2 calculation

You can calculate the CO2 content without measuring it. First measure the carbonate hardness and the pH value. Then look in the adjacent table for the row and column with the measured carbonate hardness and pH value. At the intersection point of the corresponding row and column you will find the value of the CO2 content. The area with sufficient CO2 content for ideal plant growth and pH value without an adverse effect on the fish is coloured clearly.

Recommendations for action – increasing or decreasing values

The proper documentation of the water values will help you to recognise the problems and to intervene in good time. For this purpose, we have provided you with the water analysis sheet for download: https://www.jbl.de/files/faq//672/ProAquaTest-Protokoll-Analyse.pdf

On the back you will find additional recommendations for action in case a water value requires an increase or decrease. Those who rather want to check the water values by computer instead of on paper can use the Laboratorio online per l’analisi dell’acqua for analysis purposes with an evaluation and instructions.

© 18.09.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Su di me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Commenti

Cookie, qualche informazione e poi continua la navigazione

Anche il sito di JBL utilizza diversi tipi di cookie per poterti offrire una funzionalità completa e molti servizi. I cookie tecnici e funzionali sono strettamente necessari al funzionamento di questo sito. Inoltre utilizziamo i cookie per il marketing. Questo ci permette di riconoscerti alla tua prossima visita sul nostro vasto sito, di misurare il successo delle nostre campagne pubblicitarie e, tramite i cookie di personalizzazione, di rivolgerci a te individualmente e in modo diretto adattandoci ai tuoi bisogni, anche al di fuori del nostro sito web. Puoi decidere quali cookie accettare e quali rifiutare (per maggiori informazioni vedi "Modificare le impostazioni") in qualunque momento – anche in un momento successivo.

Anche il sito JBL utilizza diversi tipi di cookie per poterti offrire una piena funzionalità e molti servizi: i cookie tecnici e funzionali sono necessari per permetterti una comoda visita del nostro sito. Inoltre utilizziamo i cookie per ragioni di marketing. Puoi decidere in qualsiasi momento – ora o più tardi – quali cookie accettare e quali no (vedi di più sotto "Modificare impostazioni").

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. Ti preghiamo di confermare con "Accetto" l'utilizzo di tutti i cookie.

Hai più di 16 anni? Allora conferma l'utilizzo di tutti i cookie con "Ho preso atto" – e potrai continuare la navigazione.

Seleziona le tue impostazioni cookie

Cookie tecnici e funzionali, per fare in modo che tutto funzioni al meglio quando visiti il nostro sito.
Cookie di marketing, per riconoscerti sulle nostre pagine web e per poter misurare il successo delle nostre campagne pubblicitarie.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.