Pond preparation: what to do in spring

It is definitely the most beautiful season - and also the most important for a well-run pond! Spring is the season AFTER winter and the season BEFORE summer. Sounds obvious, but do not underestimate it. Your fish have just completed their long dry winter spell. They have barely been active or have modified their activity, and have had very little to no food. They thus come out of the winter weakened and this is exactly what proves conducive to diseases such as spring viraemia! So spring, the time the fish are becoming active again, is the best time to rebuild the animals’ resilience and thus counteract diseases.

The right food

It’s essential to open a fresh batch of food for its full vitamin content - please don’t use your leftover spring food from last year. Tip: If you still have a seasonal food such as JBL PROPOND SPRING S left over at the end of spring, simply mix it with the summer food you’re starting to use and slowly reduce the amount until it’s gone. This way you will always have fresh food with a full vitamin content every year, because the vitamin content of a food decreases dramatically about 3 months after the first opening. The JBL food for the primavera , such as JBL PROPOND SPRING S e JBL PROPOND SPRING M , is a floating food, as the fish are now returning to the surface and, with a protein/fat ratio of 3:1, it has exactly the right composition to build up their strength after the winter.

Your actions in spring also determine whether you have algae formation in summer or an algae-free pond! Let's take a closer look at this: In winter there is much less algae formation because there is less sunlight. The two nutrients phosphate and nitrate are therefore not bound in the algae, instead they are mainly free in the water. The two water tests ( JBL PROAQUATEST NO3 nitrato e JBL PROAQUATEST PO4 Phosphat Sensitive ) will show elevated values. In spring, the amount of sunlight increases significantly and the algae use the light energy with the two nutrients nitrate and phosphate to grow. If you now bind off the phosphates in the pond water when the good weather starts, the algae will lack one of the two main nutrients and will no longer grow properly. This is because their growth depends on a balance of nitrate and phosphate. With JBL PhosEX Pond Filter (if a pond filter is present) or JBL PhosEx Pond Direct (for ponds without a filter) you can now bind the algae-promoting phosphates from the water and effectively prevent algae problems. Do not allow the phosphate value in ponds to exceed 0.25 mg/l!

The right mineral content

We cannot see from the outside of our pond water which substances may be present in abundance and which may be missing. Heavy rainfall can have an enormous impact on our pond water. The mineral-free rainwater (it is basically distilled water) reduces the important mineral content in the pond water. The result is that the general hardness and the carbonate hardness drop. The carbonate hardness in turn causes the pH value to stabilise. If the KH falls below 4 °dKH, the pH value is unstable and fluctuates very strongly in the course of a day. You can easily determine both values with the JBL PROAQUATEST POND Check pH/KH . When the rainwater from the roof runs into the pond via the gutter, it results in two problems at once. Firstly enormous amounts of pollen collect on the roof. The rain then washes the concentrated nutrient broth into the pond. Secondly, most rain gutters are made of copper. Today's "acidic" rain dissolves copper ions from the gutter and washes this toxic copper into our pond. The PO4 and NO3 water tests can be used to detect nutrients. The copper content, which must never exceed 0.3 mg/l, can also be checked with a water test. Water tests are like a blood test at the doctor. There may be no other way to check the state of health.

© 23.04.2023
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Commenti

Informativa e consenso ai cookie e ai contenuti di terze parti

Utilizziamo cookie/tool tecnicamente necessari per offrire, gestire e proteggere questo servizio. Inoltre utilizziamo con il tuo consenso esplicito cookie/tool per il marketing, il monitoraggio, la creazione di contenuti personalizzati su pagine di parti terzi come per la presentazione di contenuti di parti terzi sul nostro sito. Puoi revocare il tuo consenso in qualsiasi momento con effetto per il futuro tramite la voce di menu "Impostazioni cookie".
Cliccando "Permettere tutti“ ci dai il tuo consenso esplicito all'utilizzo di cookie/tool per migliorare la qualità e le prestazioni del nostro servizio, per l'ottimizzazione funzionale e personalizzata delle prestazioni, per misurare l'efficacia dei nostri annunci o delle nostre campagne, per contenuti personalizzati a scopo di marketing, anche al di fuori del nostro sito web. Questo ci consente di fornire annunci online personalizzati e di ampliare le possibilità di analisi del tuo comportamento d'utente. Ciò include anche l'accesso e la memorizzazione di dati sul tuo dispositivo. Puoi revocare il tuo consenso in qualsiasi momento, con effetto per il futuro, tramite la voce di menu “Impostazioni dei cookie”.
Tramite la voce di menu “Modificare impostazioni” puoi concedere e revocare il tuo consenso individuale ai cookie/tool e ricevere ulteriori informazioni sui cookie/tool da noi utilizzati, sulle loro finalità e sulla loro durata.
Cliccando su "Solo assolutamente necessario" vengono utilizzati solo i cookie/tool tecnicamente necessari.

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.