JBL PhosEX ultra
Filter material for the removal of phosphate from aquarium water

  • Removal of phosphate from aquariums: filter material for the use in aquarium filters
  • To use: fill filter material into universal bag and place it in the aquarium
  • Insoluble iron compound; no release of any substances into the water
  • For fresh and saltwater: 340 g for the permanent binding of 18,000 mg phosphate.
  • Package contents: PhosEx ultra 340 g, incl. net bag, clip
Saiba mais
Preço base 32,59 EUR / kg
Preço de venda recomendado, incl. IVA
À venda no seu revendedor da especialidade.
class="button left expand secondary" >Cesto de compras
Lista de desejos
Vendedores perto de si
Pode encontrar este artigo na sua loja da especialidade e na venda online
Informações sobre o produto

Água limpa e saudável
Os restos de plantas, alimentos e produtos metabólicos pioram a qualidade da água do aquário. A boa qualidade da água é necessária para favorecer a saúde dos peixes e das plantas no aquário. Esta pode ser conseguida através de diversos filtros e diferentes materiais filtrantes. Os filtros aspiram a água do aquário e extraem a sujidade e os resíduos da água através do material filtrante.

Detalhes

JBL PhosEx ultra 340 g

Art. N°.:
6254100
Número EAN:
4014162625410
Conteúdo:
340 g
Para :
200 l
Volume embalagem:
1.050 l
Peso ilíquido:
394.000 g
Peso líquido:
340 g
Conversão de peso:
1000
Dimensões (c/a/l):
43/225/125 mm
FAQ
JBL PhosEx Ultra: 2.0 mg/l of phosphate comes out from my faucet. My question: Does the filter medium last during water changes when it is in an absorptive state, or does it have to be replaced each time?

JBL PhosEx ultra binds approx. 18,000 mg of phosphate before its capacity is exhausted. That is why, even when a water change is done, it can still be used until its capacity has been exhausted and the phosphate concentration in the water rises again (check with JBL Phosphat Test sensitive). 2.0 mg/l in the tap water yields 400 mg phosphate in a 200 l tank if a full water change is done and 200 mg new phosphate if a 50 % water change is done. Therefore, you can calculate the approximate range.

After using JBL PhosEx ultra, my tank water is coloured brownish-red.

One can assume that JBL PhosEx ultra was not washed out prior to use.

Rinse the net bag with JBL PhosEx ultra under flowing water before using for the first time in order to remove dust particles which cannot be entirely avoided due to transport, etc.

Do a larger water change of about 50 - 60 %, take JBL PhosEx ultra out of the filter and rinse the granules thoroughly once more. If possible, reduce the filter flow rate for several hours, making sure that the oxygen supply is ensured, so that any particles which may still be present can be deposited and then removed with a gravel cleaner.

Can JBL PhosEx ultra in the bag be used in the bypass, i.e. in a filter tank ?

Yes, this is possible. However, you should expect the phosphate adsorption through JBL PhosEx ultra to take longer.

Where did my algae come from?

Algae problems in an aquarium can never be traced to just one factor or general condition, and instead, are always the result of a combination of different factors, which include light, fertilization, water changes – specifically, how often and how much – feeding, fish population and, of course, the specific water parameters.

According to analyses that were performed over a course of a number of years, red algae, at least the common brush algae and beard algae, occur in descending order at the following parameters:

1) too little carbon dioxide (in relationship to 100 % of the measured tank); the pH level should be in the slightly acetic range, depending on the carbonate hardness, in every case.
2) elevated phosphate levels (over 90 %); phosphate limitation by means of JBL PhosEx ultra is often helpful here.
3) too little and too irregular fertilization (there should always be traces of iron at least).
4) insufficient water changes; a weekly water change of over 30 % is recommended for algae problems.
5) not enough fast-growing plants.

Does JBL PhosEx ultra also stay in the aquarium during water changes when it is in an absorptive state, or does it have to be added again each time?

JBL PhosEx ultra binds approx. 18,000 mg phosphate before its capacity is exhausted. That is why, even when a water change is done, it can still be used until its capacity has been exhausted and the phosphate concentration in the water rises again (test with JBL Phosphat Test sensitive).

Example: 2.0 mg/l in the tap water yields 400 mg phosphate in a 200 l tank if a full water change is done and 200 mg new phosphate if a 50 % water change is done. Accordingly, the amount that can be bound depends on the water change.

Blogue - Opiniões e experiências

16.07.2017

Outline: Fertilisation in the Aquarium

The JBL plant care concept leads to vigorous and healthy growth even with the most demanding aquatic plants. JBL has all the components you need, whether it’s a fertiliser, a bottom substrate or a fully automatic CO2 fertiliser system.

Saiba mais

07.07.2017

Which is the Best Filter Media?

Special filter media can also be used to target and remove any problem substances, such as nitrate or phosphate, from the aquarium water. This table gives you an outline:

Saiba mais

18.09.2016

Keeping an eye on the most important water values

Professional water analysis sounds very expensive. But the professional water testing in your aquarium or pond at home also works on a high level and above all it is simple and inexpensive.

Saiba mais

01.08.2016

Water values for water plants in detail

If we transfer this Liebig’s Law of the Minimum to the aquatic field it quickly becomes clear how important balanced fertilisation is for plant aquariums.

Saiba mais
Laboratórios e Calculadoras

Análise da água, laboratório online

Enter your water parameters and get an in-depth analysis of your values in a matter of seconds. You enter your water values – and we analyse! Here you have the opportunity to enter the measured water values directly into the JBL Online Laboratory. This will analyse your values and explain and submit corrective measures.
Vale a pena ler

Problemas no aquário

Tem problemas com algas ou as suas plantas de aquário não têm um bom crescimento? A água é turva ou os seus peixes estão doentes? Os parâmetros da água não correspondem às suas expectativas? A nossa equipa de especialistas analisou aprofundadamente os problemas que ocorrem nos aquários e oferece-lhe soluções para os problemas dos aquários, que realmente funcionam.

Resolver problemas com algas em água salgada

Algae belong to a seawater biotope as much as corals do. Only when algae start to take the upper hand do measures need to be taken against them. Because marine algae are very varied, it is best to explain how to deal with the individual marine algae.

Otimizar os valores da água

Having the correct water values guarantees you a functioning and beautiful marine aquarium. We’ll show you how to get them.
Descarregar

Manual de Instruções

Indicações de segurança