Terrarium pustynne

A breath of desert in the living room

We humans generally think of the desert as a very hot habitat. When we take a closer look, though, we find that the habitats of reptiles in the desert are characterised by very high fluctuations in temperature, depending on where the animals are. At night, temperatures drop quite dramatically. Desert animals deliberately alternate between warm, sunny areas and cooler, shady places in their habitat in order to reach and maintain the temperature they need for metabolic processes and typical behaviour (courtship display, territorial battles, etc.).

It should be noted that desert animals in particular also need some areas with temperatures of 50–60 °C in a terrarium, although they do not spend all day there. It goes without saying that the time spent under the source of heat is also influenced by the air temperature and wind movement in their natural habitat.

In spring when air temperatures are cool and the winds are strong, they often need to bask in the sun for extended lengths of time in order to reach their preferred temperature. In contrast in the summer when the air temperature is 38 °C and there is no wind, they avoid direct sunlight in order not to overheat above their ideal temperature (35-42 °C for many desert species). The varied distribution of heat is thus a very important factor when heating a tank. The animals always need to be able to move to cooler places when they have warmed up sufficiently.

By the careful selection of technical equipment and their use (e.g. never cover the entire floor of a terrarium with a substrate heating, etc.), the terrarium keeper must ensure that climate gradients are created in the terrarium rather than a uniform sauna climate. Setting a temperature gradient in the terrarium is especially important in this context. No reptile can survive a core temperature of 48 °C.

A desert terrarium can be set up as follows: Any kind of sand is suitable as a floor covering. JBL offers under Podłoże you'll find varicoloured types of sand under the name JBL TerraSand naturalny-czerwony , JBL TerraSand naturalny-żółty and JBL TerraSand naturalny-biały . JBL TerraSand naturalny-czerwony is supplied damp and can be shaped while it is being spread. After drying, it hardens to a certain degree, thereby permitting burrowing animals to dig caves.

Depending on the animals’ needs, the terrarium can be structured with stone constructions with or without caves. Stone constructions should be glued together for the interest of the safety of the animals and the glass. This can be done by using non-toxic aquarium silicone such as JBL AquaSil przezroczysty .

There usually are two different kinds of bondings: dry bondings or wet bondings in areas which never really dry out. For dry bonding please decide whether the bonding needs to stay slightly flexible, e.g. when using stones or wood decoration, or whether it’s a rigid object. For flexible bonding we recommend JBL AquaSil przezroczysty , which is a non-toxic black or transparent aquarium silicone. For rigid bonds a non-toxic superglue, such as JBL PROHARU RAPID is the first choice. You are unlikely to find wet or moist patches in a desert terrarium. If there are, then JBL PROHARU UNIVERSAL , which also sticks under water, will help.

Weight may pose a problem with stone constructions in a large terrarium. Stone imitations made of plastic which can be found in specialist shops are recommended in this case.

Pieces of dry wood are also well suited as decorations in desert terrariums. Appropriate plants such as succulents or similar complete the picture. Cacti should only be present as plastic models due to the potential risk of injury. In general, live plants barely stand a chance of survival if there are larger-sized, physically active animal species in the terrarium. Plastic imitations which are available in specialist shops are also well suited in such cases.

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

PUSH-Nachrichten von JBL

Als Teil des W3C-Standards definieren Web-Benachrichtigungen eine API für Endbenutzer-Benachrichtigungen, die über den Browser Benachrichtigungen an die Desktop- und / oder Mobilgeräte der Nutzer gesendet werden. Auf den Endgeräten erscheinen Benachrichtigungen, wie sie der Endnutzer von auf dem Gerät installierten Apps kennt (bspw. E-Mails).

Diese Benachrichtigungen ermöglichen es einem Webseitenbetreiber seine Nutzer so lange zu kontaktieren, wie seine Nutzer einen Browser offen haben - ungeachtet dessen, ob der Nutzer gerade die Webseite besucht oder nicht.

Um Web-Push-Benachrichtigungen senden zu können, braucht man nur eine Website mit einem installierten Web-Push-Code. Damit können auch Marken ohne Apps viele Vorteile von Push-Benachrichtigungen nutzen (personalisierte Echtzeit-Kommunikationen genau im richtigen Moment.)

Web-Benachrichtigungen sind Teil des W3C-Standards und definieren eine API für Endbenutzer-Benachrichtigungen. Eine Benachrichtigung ermöglicht es, den Benutzer außerhalb des Kontexts einer Webseite über ein Ereignis, wie beispielsweise über eine neuen Blog Beitrag, zu benachrichtigen.

Diesen Service stellt die JBL GmbH & Co. KG kostenlos zur Verfügung, welcher genauso einfach aktiviert, wie deaktiviert werden kann.