PAR measurements in the aquarium - The strength of the JBL LED SOLAR

How much photosynthetically active radiation (=PAR) really reaches the aquarium plants?

Aquarium fans (fortunately!) know it’s better not to have colourful aquarium lighting and that bright lighting has little in common with lighting quality (e.g. fluorescent tubes in living rooms). During their evolution plants have adapted to the spectral components of sunlight and now use a range between 380 and 780 nm (blue to red) for photosynthesis. These are the wavelengths that chlorophyll and other pigments use to supply the plant with energy.

It’s very important to JBL that the JBL LED SOLAR lamps generate high PAR values to make your aquarium plants grow well. But what happens to the PAR value at increasing water depths? No one has ever measured how the PAR value changes under water and how it behaves at different colour temperatures.

To find out, the 1 m deep Koi aquarium at the JBL Research Centre was turned into a diving tank. Biologist Heiko Blessin brought along his diving suit and diving equipment to measure the lamps under water using a PAR meter. The PAR meter was placed in a waterproof mobile phone case and the sensor head was slowly moved back and forth in the direction of the light at different depths. Elena Hänle, JBL’s chemistry expert, noted the highest PAR value displayed at each depth on the outer pane.

The values were measured directly above the surface (5 cm distance to the JBL LED SOLAR NATUR ) and directly below the surface, then at distances of 10 cm, until they reached the bottom of the tank.

The tables show the exact values measured, with the reducing value caused by the mobile phone cover corrected. The illuminance in lux was always simultaneously measured with a luxmeter, so the lux values are also entered in the table.

Good news for the aquarium plants is that we were still able to measure 131 PAR (at 2700 K), 122 PAR (at 4000 K) and 150 PAR (at 6700 K) in 40 cm water depths! These are really excellent values, translating into extraordinary plant growth to please all aquarium owners!

The lux value was also measured, as it is a good index for the illuminance. The lumen number is irrelevant, because it can be increased at will, e.g. by amplifying the green part of the spectrum, without being beneficial to the photosynthesis of the plants. Only with the combination of the full spectrum and the high PAR value can we see how well lighting can promote plant growth!

Kelvin describes the light colour or colour temperature of light and is abbreviated with K. It is perceived by the human eye as yellowish-warm or bluish-cool.

The measurement

Tested LED: JBL LED SOLAR NATUR 68 W

Distance LED to water surface: 4-5 cm

Measurement: Below the centre of the LED. Measuring depth related to the distance to the water surface. At 80 cm water depth no value could be recorded due to the size of the PAR meter.

2700 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 0 817.8 31.2
Below the water surface 0 788.8 26
Below the water surface 10 345.68 13.2
Below the water surface 20 225.04 8.8
Below the water surface 30 157.76 6.2
Below the water surface 40 131.08 5
Below the water surface 50 114.84 4.2
Below the water surface 60 100.92 3.8
Below the water surface 70 89.32 3.2
Below the water surface 80 ND 2.6

*measured PAR values + loss factor through waterproof plastic cover (~16%)

4000 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 0 865.36 30.7
Below the water surface 0 788.8 27.8
Below the water surface 10 336.4 14.8
Below the water surface 20 229.68 9.4
Below the water surface 30 167.04 7
Below the water surface 40 121.8 5.5
Below the water surface 50 103.24 4.9
Below the water surface 60 99.76 4.1
Below the water surface 70 87 3.6
Below the water surface 80 ND 3.2

*measured PAR values + loss factor through waterproof plastic cover (~16%)

6700 K

Measuring point Measuring depth [cm] PAR [μmol/m2s] Illuminance [lx]
Above the water surface 864.2 33.9
Below the water surface 827.08 28.6
Below the water surface 10 386.28 15
Below the water surface 20 266.8 9.5
Below the water surface 30 191.4 7.1
Below the water surface 40 149.64 5.7
Below the water surface 50 125.28 5.3
Below the water surface 60 104.4 4.6
Below the water surface 70 96.28 3.4
Below the water surface 80 ND 3.2

*measured PAR values + loss factor through waterproof plastic cover (~16%)

© 27.04.2020
Heiko Blessin
Heiko Blessin
Dipl.-Biologe

Tauchen, Fotografie, Aquaristik, Haie, Motorrad

Komentarze

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.